5 seasons with same bike, 4 seasons I can count the passes with tire spin on one hand when using Hook Up Pro. Switched to drag max last year and fought traction all year, however most races are No Prep races. On a fully prepped track the bike ran fastest pass ever on Dragmax. This year, running 2 wheels with both tires depending on track
Giving chris moore all credit for not excepting a loss , but for going back and figuring out where he failed himself , I'm still a Kawasaki guy , but you can't beat what a bike man he is , All props bruh .
I’m getting back into bike racing and I’ve been looking for a channel like this. I love all of your knowledge. Keep up the good work! It’s a crime you don’t have more subscribers!
No joke you are the best channel on UA-cam. Your going to be a multi million subscriber channel. I'm so glad I found you now so can be one of your og subscribers lol 😆
Most problems with the hookup comes when your running 1/4 mile and your over 190 mph 1/8 mile the hookup is nice also with a stock motor bike your not going to overpower that thing as far as the dunlop I don't have experience with it on the street Ideal for the street with stock motor would be 1. Shinko hook up pro pro 200 2. 6.75 inch wide rim 3. Tire softening compound 4. 64 inch 5. Alittle ballast if needed
Shinko hookups did me good on street and track. I could run 28lbs of air on track and still hook. I'm a heavier rider so that also played a role in traction. My friends would run 18lbs weighing roughly 180 suited. Just heat them up good and roll out
Hats off to Chris...Always Honest in his videos...I bet that other guy won't admit he didn't have much experience with a short wheel base and stock clutch 😂🤣😂🤣 look out for him down in Mexico somewhere in the trees hiding to make a sneak peek 🤣😂🤣😂🤣😂 ZukNation
I tried a dragmax on the street. It did not in my opinion do as good as the shinko. Do you prefer the Air shock over the triple adjustable Penske? NOBODY has done a real in depth video on the Penske air drag. I’d like to here your take on shocks. 👍🏼
Shinko works better on the street way better than the Dunlop. Take some rear sprockets with you to see if you have to drop one tooth to keep from slipping so much.
@@kencalip6129 "TJ" Among others was talking big ish on Chris.... ....it was obvious the bike wasn't set up right but, they used the opportunity to bash! When he goes back I wonder if TJ and the gang will be quiet or switch sides?
CM, You've probably been asked this a million times by now..... All us Aussies are wondering when do we get an update on how Black Mamba is doing? I totally miss seeing that bike tear it up. 😎
Mr Chris Moore... how much do you weigh suited up ready to race? I am wondering how much power to weight ratio advantage you have from your small size.
5 seasons with same bike, 4 seasons I can count the passes with tire spin on one hand when using Hook Up Pro. Switched to drag max last year and fought traction all year, however most races are No Prep races. On a fully prepped track the bike ran fastest pass ever on Dragmax. This year, running 2 wheels with both tires depending on track
Giving chris moore all credit for not excepting a loss , but for going back and figuring out where he failed himself , I'm still a Kawasaki guy , but you can't beat what a bike man he is , All props bruh .
Took an L like a man. Now putting in the work to get better and go back while risking another L just to try and get that W.
Keep it going MooreMafia
Bravo Chris, that slipper was the enemy on the street....Your bike out powered the bike that won no cap easy to see but that clutch doe😔
your work is impeccable and the vast knowledge about motorcycles is almost infinite, you have all my respect #MASTER !!!
I’m getting back into bike racing and I’ve been looking for a channel like this. I love all of your knowledge. Keep up the good work!
It’s a crime you don’t have more subscribers!
Happy birthday Chris!🎂🍰 little older, little stronger!!🖤
No joke you are the best channel on UA-cam. Your going to be a multi million subscriber channel. I'm so glad I found you now so can be one of your og subscribers lol 😆
Ceramic bearings self clearance and polish themselves. The more you use them the smoother they get.
Good to see stuff like this on how you need different setups for the street and strip.
Nice! I’ve had my swingarm able to switch between 64” for the street and 68” for the track.
Shinko always work best in the street. They hook up even in the rain. Shinko is a soften tire and match well with asphalt.
Love that bmf right there playa
Can't wait to see ot go down. In Mexico 🇲🇽
Prep glue helps a ton for street racing like you are doing I use devils glue. It's works for 1800hp cars and definitely helps with motorcycles too.
Once you get it dialed in for the street, you’ll be hauling ass. Hopefully I’ll make it back down there to watch y’all soon
That shinko hook up likes to be smashed on the street. I'd start at 8psi and go from there. You got this bro!
Always smashing that like button. Can't wait for you to get back out there and show the difference of what the changes have done.
Magic mike does tire and clutches multitalented
That was a MASSIVE and LONG wheelie.
I have used a shinko and the Michelin pilot slick more expensive but it work for both
go get em killer bust some heads stay safe stay fast champ
Can’t wait to see you back in the street race with this new setup.
Thumbs up Chris👍
Those carbon fiber wheels and the ceramic bearings are a must have! 👌👌💯💯
Most problems with the hookup comes when your running 1/4 mile and your over 190 mph 1/8 mile the hookup is nice also with a stock motor bike your not going to overpower that thing as far as the dunlop I don't have experience with it on the street
Ideal for the street with stock motor would be
1. Shinko hook up pro pro 200
2. 6.75 inch wide rim
3. Tire softening compound
4. 64 inch
5. Alittle ballast if needed
You made the right decision on the tire and the back hole .. we’ll be there for the show down. Good luck stay safe 👍🏻😎
Chris, you ought to buy a land about half a mile long and turn that into a dragstrip, lights and all. Lol!
Very expensive and insurance would kill him.
Chris keep up the hard work man. Waiting to see the outcome
Great Chris ,
don't forget the sprocket theme
Chris I knew you were definitely going back to Mexico on a revenge tour with the 2020, I wish I can get Chun Li running like that 😆
I tried to tell them: "get him while you can" ,cos C Moore will figure out "this street racing thing" and it's going to be wrap for everyone else.
Facts!!!
Shinko hookups did me good on street and track. I could run 28lbs of air on track and still hook. I'm a heavier rider so that also played a role in traction. My friends would run 18lbs weighing roughly 180 suited. Just heat them up good and roll out
Damn that Gixxer looks sick! Making me wanna sell my Lowrider S and go pick one up..might just do it too. Keep up the great content and thanks
Once you get it setup how u want for the street. Take it back to the track in street configuration and let's see how fast it can go.
Good luck out there man. Safe travels as well
Some great passes today in Mexico and from what I understand they're gonna be out there tomorrow
Man how do I get there
best sport bike channel on you tube to date!
well my k6 turbo blew the shinko hookup off the tire a real smoker well it was fun to ride. Well when it worked anyway
Shinko should hook good....my 14 runs them fine only on a 200 tire though...the 180 nope!!🔥🔥
I like the color combination, those are the best wheels to me
I like the shinko for just you just put the drag max on my bike hvnt had a track day since the October class
Is that a 200 Shinko? I I would think if your trying to get maximum traction that wider tire would be your best option.
Moore killer machine....nuff respect 🇦🇬
Not a dragster but heard for years shinkos are good for street racing
Shinko hook up works better than any tire in street. Other break loose.
Chris we still waiting on the return to Mexico!! We need that
Hats off to Chris...Always Honest in his videos...I bet that other guy won't admit he didn't have much experience with a short wheel base and stock clutch 😂🤣😂🤣 look out for him down in Mexico somewhere in the trees hiding to make a sneak peek 🤣😂🤣😂🤣😂 ZukNation
The Shinko is a good move. I'll probably catch some flack for this. But I'm not that excited with the Drag Max street or strip...
I tried a dragmax on the street. It did not in my opinion do as good as the shinko.
Do you prefer the Air shock over the triple adjustable Penske? NOBODY has done a real in depth video on the Penske air drag. I’d like to here your take on shocks. 👍🏼
Shinko in the streets- need to be 65-66 in bro
Much Respect!!! Took the L like a man!!! Put in sum work and now going back!!! Good
Luck hommie!!!!🤙🏽💪🏽
What’s a good size sprocket for the 8th mile on a Busa?
You are doing the right thing now
Could you put a set of bst's with ceramic bearings on the ZX10R ? I want to see it crack 200hp untuned. Ps use the best tire for hp as well
Shinko works better on the street way better than the Dunlop. Take some rear sprockets with you to see if you have to drop one tooth to keep from slipping so much.
Watching those wheels makes me want to get them
Michelin rs work great
I'm ready for the actions
I cant for the life of me find where u went back for round two with this bike.
Those BST wheels are sick! That bikes a beast cant wait to see it rippin boys and causing grown man tears 😉🤙
Love you Chris.
GSXRRRRRRRRR POWER
I only run q4’s works good for me on the street but I’m not pushing as much hp as you are
They work great from a roll but a dead stop you need the hookup
I hope punkin out there as well I want too see Panda chris an punkin'💪💪
Mexico, Florida? 1200 miles to MX is a bit of a ride. Seals on the stock bearings can be removed for a cheap a$$ solution.
Can't wait to see you go clean up when you head back down to "mexico".
Do you recommend the clutch mod if you just a street rider and you don't race?
Happy birthday Chris
What would it take to get them to make a clutch mod for the 750
I've been waiting for this!!!
Me 2
@@kencalip6129
"TJ" Among others was talking big ish on Chris....
....it was obvious the bike wasn't set up right but, they used the opportunity to bash!
When he goes back I wonder if TJ and the gang will be quiet or switch sides?
Hey do you not run rear brakes on the 1000?
CM, You've probably been asked this a million times by now..... All us Aussies are wondering when do we get an update on how Black Mamba is doing?
I totally miss seeing that bike tear it up. 😎
Let's get it 💪😎💰
Now that's how you go to a street race 😁
Chris I don't have a comment for you but I got a zx9r 02 model stock carburetors what can I do sprocketwise to increase my speed
But not so much only Chris but if anybody out there I can give me some input on that zx9r it's 02 model give me a little bit of somebody
Shinko dawg!! All day!
Are you going to wrap your bike like you did your trailer ?
Man I like that purple beast b sass ok there
Back there
Hey Chris, why the short swingarm for the street? Man, I love that bike! Lol
Long arms spin too much in the streets
Shinko hook up for street all the way🤙🏼
Shinko hands down! It just bit better on the street.
Im only here for the 2:46 - 2:48 Mark...lol just kidding.....
Mr Chris Moore... how much do you weigh suited up ready to race? I am wondering how much power to weight ratio advantage you have from your small size.
I think in an older video he said 155 or 160
@@86250r that is a great weight for a guy to race at. Camera girl is likely lighter though. Less weight = better power to weight ratio.
Glad to see your taking Pandas 🐼 advice switching tires, also are you running MR12?
That's what's up love the video let's get them
Lets Go Across Dat White N Blue One U Tuned Ass Chris Dats Who I wanna See U Go Against Dat Bike Is Fast ....Moore Mafia Fast
Adjuster lock nut is still loose....
Good call! 👍
Is it for sale?
Id go longer if I was racing on a road that good in Mexico.
Mmmmm Mexico racing
Keep same gearing?
Niiiiice!!!!😈🤘🏼
Shinko by FAR better for street.... did you leave the first gear mod the same?
YEAHHHHH BUDDYYY
Shinko hookup pro. Hands down
Oh ya oh ya... more soy sauce please... “ Make Street Racing... Great again👍🏼😂”
First any one smell rubber !!!
Shinko 3lbs of pressure
Can't wait 🤗
Awsom man
Ohhh yeahhhh