How to replace the fixed charging port
Вставка
- Опубліковано 7 січ 2013
- Find cell phone replacement parts at: www.etradesupply.com
Use our coupon code: ETS8NTT3 for small discount. It can be only used on orders over $50 until Feb.10th, 2015
Question? See our Facebook!
www.etradesupply.com/catalogse...
Facebook link: / etradesupply - Навчання та стиль
You are a true master. You did it in 2 min , i did it in 2 hours. Thank you for you're tutorial. 👍
Thank you for your comment, we are glad to hear that it can help you.
@@etradesupply How many degrees did you use?
Did 3 in a row all successful. First time too. Thanks mate!!
Worked like a charm. Thank you so much. Just remember to hold heat gun only on the usb, and you will have no problem. S2 epic working 100 percent.
Very professional as always!
i've ben looking / reading everywhere to find this, thank you! now I know, how the pins are connected to the board. cause the ones on my tablet had come off.
this is absolutely what NOT to do for socket replacements, it sure does look fast but it could easily damage the surrounding component without heat resistent tape.
ua-cam.com/video/xyeLsiVzQW8/v-deo.html
U will get proper knowledge
You can use Foil paper too
I’ve ever tried soldering but ended up messing things up but this is cool with all appropriate tools. Chargie USB stick solves charging issues and prolongs battery life by capping charging at any desired %.
nice one
Thanks!
Njia nzuri sana u did well
Wow I really like it
Very nice bhaiyaa
thank you
Nice video
No audio provided! Good video.
At what temperature was the reworkstation set to for removal?
Using an heatgun is just to OP you may remove some really small parts like resistors and capacitors, get a good soldering iron with a proper tip add some flux on an small length of soldering wick, place it on the pad and gently heat it, it's will suck the solder.
Hi is there a video to demonstrate how to get to the battery port? Thanks
Good... Simple technique 🤔
What are you supposed to do when you to reattach a new charger port what kind of tools?
is there any tool as an alternative for the heat gun because I don't have it?
is the same process to replace on galaxy s3?
thanks in advance
plz make a video of micromax canvas knight 2 and changing the charging port
Hi, what temperature I need to soldering 👨🏭 thank you very much.
Holy shit thank you thank you. Lol 😂 I didn't want to get rid of it. ❤️❤️❤️❤️❤️
what temperature did you used the heat gun at
can you use any port to replace it with, i need to do this but dont wanna buy parts (too impatient) can i use the one out of my ace and replace the one in my s4 with it?
Nice sar ...
hi,can this method works for all micro usb ports?
good
You seem like the man to ask, I have a hudl 2 that won't turn on, it's had a new battery but all I get is a red battery when I try to turn it on and then it goes off, please help
where can i buy the samsung s3 charging pot on line.
WARNING if you put a port on like this from the top with just hot air you will melt the inside of the port 99% of the time. Best to wick all old solder off and use a ion to install the new one
If you use the right temperature it should not.
In my case one of the pins inside the port broke, not the solder, so i didn't replace the solder.
This port sits firmly in 4 holes, so usb pins aren't put on stress like in different devices.
Also you need to be very careful if you got small components nearby, as they may move as you heat thing up :)
yeah. and shield the other components with tape or alluminun foil, on the board. you can blow that little resistors.
i do it the same way you described
Emmet Myers so whats up? Did the guy in the video did it wrong?
Rolly Yi yep, you can see the port melting and he wipes off the melted part with his tresers
Sorry, what's the name of the tools you using , please
How many degrees heat you use?
In that case the temperature desoldering?
temperature used?
Vai allah apnake aro boro koruk
Dude, that was just a simple re-flow job. You need to show them how to clean up the old solder and apply new solder. This is kind of a half-ass method; I will admit that it will usually work as a temporary fix, but eventually you will need to apply new solder.
Todd Richmond I think it's best for the novice. I followed another tutorial that did as you suggest, and I ended up messing up the tracks when I couldn't really resolder each of the five pins. it charges, but no data. I got the nexus 7 brand new, used it every day all day for a year and a half, charge port problems arose. A 'reflow' would have given me probably another year then I'm done with that tablet anyway.
Also, I think what had gone wrong with my original port was that the pins lost contact with the tracks. So I probably could have used the same port (though it was really loose and a new one would have been nice), remove it and bent the pins downward some, then reflowed it back.
If you do like this internal plastic parts in Charger port will be damaged
I watched this before, but it came up while I was looking up a charge port repair so I watched it again.
I like how the plastic comes bubbling out the back of the port @ 1:34 that he just scrapes away with the tweezers. To much heat. I would have just removed the old solder and put it back on the the trusty iron. They sit better and stay on longer that way and you don't risk melting the inside of the port or overheating the board.
i think this is only a test board as you see there is no covering shields on IC's
is this for ipod4g
Is this the vizio tablet
You didn't clean the old solder pads and no flux wtferrkk?
Brent Simpson ....
yeahhh bad work
Because it is verry hard to do soldering in very small parts. And this is the easiest way......
Heat and air set??
I can't plug in my turtle beach in my USB port it broke wat do I do
My Gionee E3 charger pin port was damaged suggest for solution.
thank u this is really useful :)
Can you use a different phones usb
and what happened with the Flux, you do not use?
Must u use hot air gun
Any specific reason for not using soldering iron ?????
Would This Work for a Moto G
Gosh, the heat gun melted my motherboard!
Don't use God name in vain like gosh search the root word of gosh
@@nonstop6823pull your panties up grandma😂
Can I change micro to Type C?
what temperature and did you use any flux ?
thanks
agar cc ke track kharab huva ho to kaise solve kare uspe ek video banao sir
What is the name of that tool that you used it
It's just a hot air gun.
He has technique which keeps the hot air gun from destroying the replacement port which has plastic parts that easily melt I wouldn't recommend trying this yourself
What is the thing in the begging he uses to pop the port off
ketna price ma change hota ha ya c type charging jack
Where can I buy a port for the 8.4 pro, please.
The same part you are replacing in the video, but for the 8.4 pro.
***** you get it from ebay 2 oieces for 2 pounds
Yo I tried to Gorilla glue it on will it still work like that!? should of watched a video on how to do this before i tried the glue.. smh.. /:
No need for a hot wind welding only
Bhai iska kya price hota hh
Can I just use my soldering iron to melt the metal off and replace wit with more solder??
You will probably rip the pads up doing that so do not recommend it.
Can you please help me my phone have a problem
Be wonderful if you'll talk
I agree 💯 percent with you on that comment,damn!!!!! Will this work on my Tracphone flip phone? I hope so!!!!!
how to fix the battery port
Bro please what is the name of that object that u you to grab the charging port
Twizzer
I Did It In My Own Way. In my case connector and PCB was completely damaged. You can check my video.
why no flux? would not applying flux before soldering the chip back on create oxidation to the charging port and create a weaker bond?
Hm po kaya pagawa ?
हेलो भाई कैसे हो
Why not soldering iron?
Yeah the ipod has samsung chips in it
what equipment do this
We use the hot gun, you can find it here: www.etradesupply.com/desoldering-station-double-led-didplay-with-hot-air-gun.html
8 years old video 2021
first of all i was was like wat the hell is he doing with its port
very nice
Thank you
Does memory of phone and data delete in changing slot ??
Of course not.
Kelvin Johnson
my Lenovo 9920 mobile charger connector motherboard tracks Renu breaking how to connect charger cannecter
Is there supposed to be no audio for this video? There is only the entry audio with the eTrade Supply logo..
Bhai kitne main sahi ho Jata haia yeh
sir please Help charging jake to lag jata he .. but battery connector pe voltage kam ate he .. kaha re jamper lagaye
Samsung b110 modules mobile h multimitor se chek karne par ek tarf se reding 40 aa raha h aur ek tarf SE bip ki awaj aa rahi h iska upye batiye
Que cagada... Não isolou a placa com fita kapton, a fita evita que a placa receba calor, para que não haja mais danos ao aparelho. E outra, só trocou o conector né, funcionar não vai !! Pois o conector novo não pode ser posto deste modo,pois o mesmo possui peça plástica em seu interior, e quando o calor é exposto a peça, ela simplesmente derrete. O vídeo é um coco, mas a intenção foi boa !
Bhai ye jo heat dene wali machine hai isko kya bolte hai
Soldering iran bahat hit ho rha hai kya kare upaye bataiye
Anyone know what that thing is that he takes the charging port off with
It is a heat gun.
goood
so you didn't add solder?
We don't have to because there is enough solder on the mainboard, we use hot airgun to melt it and fix the new charging port after it is frozen.
Won’t the heat damage the surrounding components as a learner?
No....
if it's already broke what's the harm
I’d never be so happy to have privacy back in my life no friends needed if I can make a call and it’s private it’s worth a trillion dollars
Why don't anyone put a little fan in tge the back
good jod new fd💚❤💙😀💛💜💚
is that the screen hes heating.....yea...
We don't have much tools