How To Fit A Glow Plug Relay On Peugeot 407 2.0 HDI | Were Is The Diesel Glow Plug Relay | Fixes
Вставка
- Опубліковано 15 жов 2024
- Fitting A Glow Plug Relay On Peugeot 407 2.0 HDI 136 | Were Is The Glow Plug Relay | Quick Fixes
5 minute job that could save you £'s on a dealer or garage fitting.
Tools needed: T20 tool
Regarding the glow plug reply, if buying secs hand just match up the numbers in white (ignore the ones in yellow).
My car is a Peugeot 407 Sw 2.0 hdi 136 (2006)
Good Luck
** Note that I'm note a mechanic & not responsible for any works carried out. These are things that have worked for me. **
Exactly the same place and box on C5 X7 (2010). Thank you!
👍
Would relay control unit be responsible for engine suddenly going to no more than 3000rpm, but after restarting it going back to normal until it occurs again next time?
You need to find out the fault code stored in the ecu
@@ThatRunningGuy
It gives me this:
www.obd-codes.com/p2137
Quite a mouthful of what could go wrong with this one, it seems.
Mine is lumpy and Smokey when cold could it be glow plug related? Fine after about ten mins of driving
Just changed my glow plug relay on my bmw 520d. Gave me the fault code. Without a fault code it’s just guesswork. Car would take a few turns to start, blue smoke only on cold start up and rough idle. Since changing, all back to normal
What were the symptoms that made you change urs? my car is now going into limp mode because of my FAP being full of black smoke my car is producing, but before that i could see the care was kind of missfiring like losing power for a second and then coming back as if the diesel stoped going in for 1 second and started again, were your symptoms like that?
Glow plug relay.....it was a starting issue.
I brought a cheap eBay £5 OBD2 reader and found the fault code using my phone. Re car losing power for a second....could be a dirty fuel filter??? (cheap and easy part to change)
@@ThatRunningGuy what was the fault code? p1352?
I have same p1351 faulty code and p0088
On peugeot 508 2.0hdi 103kw 2011,im changed fuel pressure sensor and now when its machine hot working perfectly,but when its cold he have bad (leer) rpms.
Its possibly because of that glowplug rely?
A glow plug is a heating element that heats incoming fuel and air to encourage efficient fuel combustion in a diesel engine. The fuel combustion starts your engine so that you can drive.
@@ThatRunningGuy ok,i will change glowplug its cheapest and easiest way and i will see.
@@darioplesa5462
Hi.
Did it fix your problem?
Cheers.
@@tonypaddler y i changed 4 Injectors and Pressure rail sensor after that was gd.
how did u figure it out it was the relay? I have the same 2.0hdi 136 bhp and my glow plug indicator doesnt light up and it's -2degrees celsius. No errors on dash or on diagnistic tools.
noobsound
I used a ODB2 code reader to get the fault code. Then start with the cheapest parts first: fuse, relay (£15 2nd hand off ebay) and last the glow plug! Good Luck
Your method of replacing the glow plug relay is good but why would you like to start with the cheapest part first? This way you might replace every single component and still have a car that is not running properly, both relay and glow plugs can be easily tested with a simple multimeter, only replace the parts that are faulty, replacing one good component with another good component will not fix your car.
***** true, I've never had or used a multi meter before. Just had a code reader to hand.
It is a very good tool, highly recommend, this channel might be useful for you "Schrodingers Box" if you're interested in diagnostics with a use of a multimeter, even though the tool has its limits you can get quite a few things tested with it, scope would be ideal sometimes but it is very expensive. When it comes to glow plugs you need to be careful with them, a lot of times the tip of the glow plug breaks off and stays inside the head, there are tools to pull it out but it can turn into a real nightmare very quickly. I've had a chance of diagnosing glow plugs not so long ago on a 2.0 HDi engine, the plugs are hardly accessible, but the connector is not, it has taken about 5 minutes to check the resistance of all 4 glow plugs, once you get familiar with all the tools and testing methods it gets a lot quicker. Please be cautious though, the tool can cause a lot of damage as well if not used properly, the channel above is a good place to start :)
Thanks for your comments. This UA-cam Channel is here to try & help people from my experience of working on my car. Input very welcome as will help someone and save on expensive garage costs!
What is this relay for?
I have a 407sw 2.0 hdi it's starts fine as it warms up thick white smoke and shakes could this be related
No as the glow plugs and relay are to do with starting the car. Causes of White Exhaust Smoke. ... One of the main causes of white exhaust smoke and coolant loss is a cracked or warped cylinder head, a cracked engine block, or head gasket failure caused by overheating. A cracked head may allow coolant to leak into one or more cylinders or into the combustion chamber of the engine.
do you know where the glow relay are located on a 2004 peugot partner.
Unfortunately not, sorry
I do. remove the filter airbox and it is by the rear of the headlight.
It has an aluminium ribbed cover and is held on with a nut. remove the electrical connector as per this video.
Just taken mine off today, think the part number is 9640469680. Have some on Ebay, some look different but I assume they do the same job as the part number is the same.
Thanks for this video 😀
Do you need to disconnect the battery to change the relay?
I would recommend removing the - negative terminal from the battery
Just A Car Guy Thank you
My 407 sw don’t start after a few minutes on ralentí (slow motion) because the computer get too hot. After 40 minutes, I can start fine when the computer get cold. (Gasoline version. Not diesel)
What was bad or faulty the glow plug relay symptoms on yor car?
Having problems starting in cold weather. This problem could be the relay or the glow plugs
Also glow plug will help in regeneration of anti pollution system,mine C5 2.0 HDI was starting in -16 without it, but regeneration was problematic.
Cheers mate
Para que serve isso
Wymiana przekaźnika świec żarowych
was the fault code p1351, because my car some times dose not start, check battery, starter motor, alternator. now im thinking relay or glow plugs.
P1351 on Peugeot diesel cars relates to 'Preheating Relay Circuit'
Start with the replacing the cheapest parts first: Relay (£15 2nd hand off Ebay) and then getting the glow plugs tested.
My car still has a P1351 code & takes a little longer to start when 5c or lower, but lucky for me always starts. So I possibly just have 1 glow plug that is faulty.
Good Luck.
Wow, that's a lot of literally.