7/30/2019.......I just found a very easy way to get past the Windows 10 driver problems after updating to a new Windows update version . I had problems after downloading Windows Update Version 1903 . I went to the DJI download site and downloaded DJI Assistant 2 . That download has all the drivers needed to keep older flight controllers working with the older assistants , ( NAZA M -Lite and NAZA M V2 ) Again , download the DJI Assistant 2 . Hassle free .
You don't even have to open the DJI Assistant 2 . It just loads all the older drivers , and your previous NAZA M - Lite or NAZA M V2 assistants will start working again .
**2019 UPDATE** Didn't work for me. Had to regedit: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System then modify:EnableLUA to 0. (Change it back to 1 when done) then install DJI drivers. then follow the steps in this video. profit. DJI :(
Mine still not connecting, finally was able to download and install the driver installer, did everything as this video and nothing. I have been working with drones since they came out and I never had a problem with connecting any flight controller. I'm so tired of keep trying. Lol I know is the new alienware computer I just got.
OMG..thank you so much!! It's 2024 and I have a windows 11 laptop and been trying to resurrect an old DIY drone with a naza fc and could not get it to talk to my pc no matter what i did ... until now. You guys are awesome!!
FINALLY! This is the answer that I spent over 4 hours looking to find! Worked perfectly. New Naza set up in less than 15 minutes after performing this "fix"! Thank you, thank you, thank you!!!
You Sir are a legend, i was about to go into my Phantom FC40's controller in desperation but realised my Phantom was not actually seeing the software so i decided to try your method while watching the video on a mobile phone and using a magnifying glass to see what was going on and after one or two slight mistakes on my part while navigating the file system and watching the video again,,,,, and again i installed the DJI software on my Window 10 PC. My Phantom started beeping for joy until i reatached the battery and then i went to the NAZA-M2 Basic tab then RC tab, powered on my controller and the software recognised my controller straight away without saying "please connect to controller" Nearly 6 hours i've been trying to suss out what was wrong, 6 hours. Thank you for uploading this video, it has been a huge relief.
My friend, i always used my naza m v2 on Mac so i never had problems. Lately ha had to make a new setup and i had to take my WIN10 laptop on the field for changing the parameters. I was simply lost.... You took the time to do this wonderful video, for us all and brilliantly solved my problem. You can't even know how much I'm grateful to you right now!!
I just inherited an old naza lite FC and was about to change controller. I had no luck connecting DJI Assistant to the FC. Thanks to your video, it works now!
I appreciate this was posted 2 years ago but I’d like to say a big THANK YOU! Yes I still fly a (when I can) an old Naza M on a F450 and this got me out of a pickle. Much appreciated 👏👏
If I could like this video 100 times, I would. I fought with the software for hours and this was an instant fix. My phantom was telling me it needed the calibration before it would start the props and I couldn't figure out why the assistant wouldn't recognize the firmware. I love you! Cheers
Thank you so much, Just bought a used FC40, on win10 of-course nothing worked on Naza assistant, I'd searched the forums/website/manual and nothing worked till i found this. I owe you a beer or several. This needs to be wide spread as it would help out alot of people. again thanks.
This was a huge success!! Thank you for posting this video. I hadn't flown my DJI Phantom 1 in over three years and couldn't get it to start up. So, I tried running the NAZA M V2 software and found it couldn't detect the quadcopter. One of the Windows 10 updates must have broken it. However, I did exactly what you described and bingo it worked the first time! GREAT JOB!!!
I was just about to give up and I thought... Maybe painless 360 has a CLEAR solution... Well... he fixed it again... Thank you so much dude your videos are the best around
Thank you very much for putting this video together. You have solved my long term running issue, up till now I had to borrow a friends window 7 laptop for Naza interface. I am so much happier now that I can now use my own Win 10 laptop for my Naza interface.
Thank you very much painless360, i been searching the whole night in the internet how to connect my mc to dji mv2 assistance and i found you video just this morning,it worked perfect.👍🏻👍🏻👍🏻
I love your videos!! This channel is the first place I look when I have a problem! Thought I had a bad naza system turns out just need the right drivers!
After more than an hour, found this solution. I love DJI and the products, but they should have this issue in the user guide and save people from all this hassle. Thanks!!!
Mahalo for the video, racked my brain for a few hours trying to get it to connect. I could open the assistant no problem, it just wouldn't talk to the MC. no green and blue light on the bottom left corner of assistant. It works now. Mahalo so much, Your awesome. Please keep up the great work, and thank you also to the person who sent you this fix.
Many thanks to Painless360 for posting this video and also RCBowerz (Liam) who must be a tech wizard and a very clever person. I struggled for a few hours trying to get the DJI Naza-M Assistant (x64) to work on my Windows 10 Pro PC but to no avail, that is until I came across this video, which provided a complete fix/workaround. Thanks again Liam
You saved me a lot of troubles! This solution works perfect for WooKong-M on Windows 10 Home for me! Great tutorial and respect for geeting so much into what MS wants to be hidden or closing their solution more and more. Thank you!
Thank you for the video tutorial! Works perfectly! I fought with this to make the drivers work with their installer for a couple hours to no avail... I eventually just fired up my Windows 7 virtual machine. I figured the drivers simply were not compatible with Windows 10. DJI needs to start providing this workaround on their site/during installation or get the damn driver signed - it's a big fail that they have done neither by now.
+John Cuppi Hi John, Excellent news to hear the video has helped! They have been contacted by multiple people including myself about this issue. I can only imagine the reason they haven't patched it is because there is something in the drivers stopping them from getting it verified/signed and releasing a new version as it seems mad such a big issue they are failing to publicly address. That is just my opinion and not based on any fact/evidence however!
Thank you! You just save my life! Win 8 had problemas to communicate with my DJI Phantom 1, but all your advise made the trick! Thanks again ! Thumbs up!
Also here i never have the chance to thank you for this video it been long time i been using my naza m lite thanks to you i was having problem to make this fly controller to work with my computer till i found this tutorial and i know many others guys had the same problem THANK YOU........for the tutorial...
I have the same issue with my PC not seeing the Naza. I went through the process of trying to reinstall the DJI driver manually, and of course Win10 in its infinite wisdom told me that the best driver was already installed and would go no further. Urgh! Short of trying another computer, in my opinion this is inexcusable by DJI. How many years have we been designing drivers for Windows now? So much for a $160 canned flight controller solution as I sit here and admire my latest S500 quad build that I can't even configure sitting so lovely on my bench. Thanks for the series Painless. I'm slowing learning more and more thanks to videos like yours. Some day I'll be proficient at this hobby. :)
Hi, thanks for this video, followed to the letter and Naza M Lite now talking with the DJI Naza software. I've had my Naza M Lite for 3 years and never previously had a problem until Windows 10 came along. I contacted DJI, who's only advice was to check Windows 10 had all updates & to re-download Naza M Lite Assistant software. Guess what that didn't work but your brilliant fix did; so thank you very much.
Thank you so much for this video, sending you so much gratitude. I am really at the end of my tether with Microsoft becoming the ultimate cotton wool and bubble wrapped nanny state, where you can't do the things you need to do and you are forced to do things you don't want to do. Your method worked for me after various failed methods documented elsewhere that must have worked once upon a time but have since been locked down. I held on with Windows 7 until forced onto Windows 8 by duff vendor USB 3 drivers, held on with Windows 8.1 until my laptop broke and I could only get one with Windows 10. It's like Microsoft wants to make IT professionals who fix things for a living to run through mazes that stretch them but are utterly impenetrable to the lay person. My pet peeve is "your organisation requires you to change your PIN" when it is my computer and I am the only person who uses it and there is no organisation except me. I do not require my PIN changing because nobody except me has ever seen me type it. Anyway, rant over, it's now time to find out why my NAZA stopped playing nicely.
Glad you got it working. The easist fix would have been for DJI to spend a little of that money they make from their customers to get the drivers certified. But, they didn't bother despite seeing how much frustration and problems it caused. Anotuer example of DJI not caring about their customers? Happy flying
THANK YOU SO F***ING MUCH, PERIOD. You guys seriously got me flying again!! YESSSS!!! Thank the pixel gods this video finally popped up. After getting a new computer I couldn't communicate to my MATRIX drone anymore and knew it was a driver issue. I tried to figure out how to manually install the driver but of course there was no instructions that were detailed anywhere. I was so close too but gave up after many many hours of PAIN (the only thing I didn't know about was restarting in that specific mode). That was a couple months ago apparently before this video was even around. Man if only this was around then, my drone and the shelf it stands upon, wouldn't have so much dust on it... But now thanks to you I am PAINLESS!!! SCORE!!
Excellent video. Nazam program works perfectly. Thank you so much. This was driving me crazy trying to get this to work. Watched the video and did just as it said and now it works as it should.
That doesn't surprise me in the slightest as DJI customer support is notoriously bad. At least their QC has improved judging by their latest products, like the Mavic, a seriously nice piece of kit.
Thanks for the guidance!!!,..I am trying to change course so to speak,..I was a DJI fan,..P3,and Spark,..but bought a DJIF450 Flamewheel 6 months ago.Just realised that I've bought archaic gear,everything has "shrunk" in the last 3 years,haha,..and a Futaba T8J!.OMG,...but will try and build the 450 anyway.After realising my mistake,by reading various up to date UA-cam fpv channels,like your goodself,..I have now bought more modern gear,=almost "rtf" Furibee x215,an Armattan Rooster,and an iFlight XL7 kit (maybe to replace the 450? and make later in the year,if I can get my head around Betaflight of course.. It's going to be an interesting year for me learning how to build the f450 and fly the freestyle aircraft,with fpv goggles.Crash course so to speak!.
Sadly, I think this is down to DJI. The driver signing practice is to stop untested/badly written drivers from making onto your PC and breaking things. DJI make more than enough money to go though the process to get these drivers signed and approved (like almost everyone else does).. Come on DJI - support your customers! They're paying enough!
Thank you, I have others with cc3d, Naze, and I have gotten help from your videos so I thought I would try. I have sent a computer to my cousin who has it running and he thought he could get mine to also. I will see by next week, thank you again, take care. Greg
YEEES! Worked for me also! Was trying to find the .inf file because it wasn't in my DJOI folder. After I saw this post I thought what the heck, 30 sec's and I was up and going with the DJI Assistant.
Took me an extra min it was hiding in a different location but yes this works thank you so much do as he tells you & if you get stuck/don't work, go back in to device manager & locate one label dji/ and or naza & update that one it will then work I hope 🤞🏽
Thank you very very much. You made it easy and very clear on how to load up the drivers (Naza M). Too bad DJI can't seem to move faster w fixes......seems like they are always one OP behind.
I found the root of the problems , and I believe that is the same for everybody else, the USB cables , they need to be good quality cables, and not the kind that come in all phones or things like that. Something like Belkin will do the trick. Then the change in the drivers can be done. Thank you guys.
Hi Carlos, this is a big point, a lot of cables you find will be intended for charging cables and the wires inside carrying the data aren't correctly insulated to avoid inference and errors when being used for a data function.
thank you so much liam I thought I was going to have to get rid of my phantom and get a new one as it is discontinued and it doesnt have any support anymore now connects to naza software
THANKS i did fix the problem with my comp thanks to you wow for a moment i was thinking naza m lite will be storage in the box for ever thanks for sharing......now the fly test.
Very helpful and now I hope I can refer to this video in the future to help me through the process. Win-10 is a work in progress and has been a real learning experience for me. I have been in the Windows Insider program since it started in 2014 and have been getting the newest builds via the fast update setting. Some or very good and some have issues. No I don't know much (very little) about how PCs and things work, but I have been amazed at what I have learned even though I am a little long in the tooth.
+Lloyd Prunier Hi Lloyd, it is an interesting thing that is evolving faster than most techies can keep up! Glad you found the video helpful and informative!
Worked great, I did have to make some changes from the the video. I'm using Windows 8.1 and everything was the same steps as the video. The DJI driver is a .EXE file and no longer has a .inf file. I followed the steps in the video but never went into Device Manager, I just went ahead and restarted my PC in the "7) Disable driver signature enforcement" and connected the USB/NAZA to the PC and run the driver .EXE file and when I started the Assistant it works as it should.
I have brought a Naza M lite.. and it is still on the way.. ad now you are telling us about naza.. that is a very good thing to hear.. and can I ask.. is it god if I upgrade naza m lite firmware to naza Mv2 firmware ????
+R A Dilan Darshana Hi There, The upgrade to V2 isn't support by DJI so wouldn't be suggested as has the possibility to 'brick' your Naza with no fix. With that said, many have had success with it but can't guarantee it won't cause problems in the future. I don't believe Painless360 have any plans currently to produce a Naza video series. Thanks, Liam
you were lucky then my friend. like I said it could be done on earlier stuff but the disclaimer I read said dji had done something to stop the hack (obviously ) and they were working on it. having said that I've had no problems with my m lites on any of my craft and if you want the full version I'd suggest buying it which not only gives you a guarantee but also pays towards new development which let's face it can only be a good thing ? glad yours worked ok
Hei. Good. Maybe you are not even reading these posts anymore, but I have a question. I got a Phantom FC40 a couple of years back, flew once but no GPS so no "go-home" option in place, so I did what most did: I upgraded the firmware first, and then I was gonna try the "GPS Calibration". After upgrading the firmware, nothing worked, constant flashing yellow light, and that was the end. 2 years later after reading multiple posts, videos, etc., I was able to upgrade the firmware in the Phantom and its transmitter, I imported the parameters... but the main problem remained: After connecting the battery, a couple of green lights, and then a flashing yellow light. After reading and watching many youtube videos, I concluded (I think) that the problem seems to be the communication between the receiver and the transmitter. I tried changing to D-BUS, PPM (I even tried the Traditional) but nothing: I always ended with the flashing yellow lights. I found the solution "Press the Black Button that is inside the compartment" just a year ago. But, every time that I press the black button, no red LED lights turns on... Any Help will be much appreciated, or this new Phantom is going to the garbage... (Maybe get a New Phantom II 5.8 Ghz Tx RF V3 and see if it works???)
+Felipe Arrate sorry, I don't use DJI kit personally. I'm surprised at how poor their support is despite the premium they ask. Sorry I can't be more help.
7/30/2019.......I just found a very easy way to get past the Windows 10 driver problems after updating to a new Windows update version . I had problems after downloading Windows Update Version 1903 . I went to the DJI download site and downloaded DJI Assistant 2 . That download has all the drivers needed to keep older flight controllers working with the older assistants , ( NAZA M -Lite and NAZA M V2 )
Again , download the DJI Assistant 2 . Hassle free .
You don't even have to open the DJI Assistant 2 . It just loads all the older drivers , and your previous NAZA M - Lite or NAZA M V2 assistants will start working again .
No driver signature alerts , or problems .
**2019 UPDATE** Didn't work for me. Had to regedit:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System
then modify:EnableLUA to 0.
(Change it back to 1 when done)
then install DJI drivers.
then follow the steps in this video.
profit.
DJI :(
Thanks, worked perfect!
Mine still not connecting, finally was able to download and install the driver installer, did everything as this video and nothing. I have been working with drones since they came out and I never had a problem with connecting any flight controller. I'm so tired of keep trying. Lol I know is the new alienware computer I just got.
looked everywhere for a fix for this.now my grandson can stop giving me crap about my flamewheel f450. your videos are simply the best. THANK YOU!
You're very welcome! :D
OMG..thank you so much!! It's 2024 and I have a windows 11 laptop and been trying to resurrect an old DIY drone with a naza fc and could not get it to talk to my pc no matter what i did ... until now. You guys are awesome!!
FINALLY! This is the answer that I spent over 4 hours looking to find! Worked perfectly. New Naza set up in less than 15 minutes after performing this "fix"! Thank you, thank you, thank you!!!
You Sir are a legend, i was about to go into my Phantom FC40's controller in desperation but realised my Phantom was not actually seeing the software so i decided to try your method while watching the video on a mobile phone and using a magnifying glass to see what was going on and after one or two slight mistakes on my part while navigating the file system and watching the video again,,,,, and again i installed the DJI software on my Window 10 PC. My Phantom started beeping for joy until i reatached the battery and then i went to the NAZA-M2 Basic tab then RC tab, powered on my controller and the software recognised my controller straight away without saying "please connect to controller" Nearly 6 hours i've been trying to suss out what was wrong, 6 hours. Thank you for uploading this video, it has been a huge relief.
3 years wondering what was wrong! , have no words.... THANK YOUU!!!!
My friend, i always used my naza m v2 on Mac so i never had problems.
Lately ha had to make a new setup and i had to take my WIN10 laptop on the field for changing the parameters. I was simply lost....
You took the time to do this wonderful video, for us all and brilliantly solved my problem.
You can't even know how much I'm grateful to you right now!!
I just inherited an old naza lite FC and was about to change controller. I had no luck connecting DJI Assistant to the FC. Thanks to your video, it works now!
I appreciate this was posted 2 years ago but I’d like to say a big THANK YOU!
Yes I still fly a (when I can) an old Naza M on a F450 and this got me out of a pickle. Much appreciated 👏👏
If I could like this video 100 times, I would. I fought with the software for hours and this was an instant fix. My phantom was telling me it needed the calibration before it would start the props and I couldn't figure out why the assistant wouldn't recognize the firmware. I love you! Cheers
:D
Thank you so much, Just bought a used FC40, on win10 of-course nothing worked on Naza assistant, I'd searched the forums/website/manual and nothing worked till i found this. I owe you a beer or several.
This needs to be wide spread as it would help out alot of people.
again thanks.
+JD please share where you think it will help others. Thanks for the feedback..
JD, glad it helped! Just keep an eye out and when you see someone in need and share this video. Liam
Once more, thank you painless360, I resolve in 5 mn with your help the problem that drove me crazy an entire day
Glad it helped - always worth a look on the channel when you start to get stuck... Happy flying!
I’ve struggled for weeks trying to get my mc to connect. This did the trick!!! Thank you so much!
This was a huge success!! Thank you for posting this video. I hadn't flown my DJI Phantom 1 in over three years and couldn't get it to start up. So, I tried running the NAZA M V2 software and found it couldn't detect the quadcopter. One of the Windows 10 updates must have broken it. However, I did exactly what you described and bingo it worked the first time! GREAT JOB!!!
I was just about to give up and I thought... Maybe painless 360 has a CLEAR solution... Well... he fixed it again... Thank you so much dude your videos are the best around
Thanks for the feedback! Please let others know we're here! :D
Thank you very much for putting this video together. You have solved my long term running issue, up till now I had to borrow a friends window 7 laptop for Naza interface. I am so much happier now that I can now use my own Win 10 laptop for my Naza interface.
+Maxwell Keith Hi there! Glad the video helped you out and made your life a bit easier! Thanks for commenting, Liam
Thank you very much painless360, i been searching the whole night in the internet how to connect my mc to dji mv2 assistance and i found you video just this morning,it worked perfect.👍🏻👍🏻👍🏻
Glad it helped. Happy flying!
After weeks I was so frustrated that my naza wasn't working... Now it works !!!! Thank you so much !!!!!!!!!
+Romain Janssens Hi Romain, glad to hear I could help! Liam
I love your videos!! This channel is the first place I look when I have a problem! Thought I had a bad naza system turns out just need the right drivers!
After more than an hour, found this solution. I love DJI and the products, but they should have this issue in the user guide and save people from all this hassle. Thanks!!!
Mahalo for the video, racked my brain for a few hours trying to get it to connect. I could open the assistant no problem, it just wouldn't talk to the MC. no green and blue light on the bottom left corner of assistant. It works now. Mahalo so much, Your awesome. Please keep up the great work, and thank you also to the person who sent you this fix.
Many thanks to Painless360 for posting this video and also RCBowerz (Liam) who must be a tech wizard and a very clever person.
I struggled for a few hours trying to get the DJI Naza-M Assistant (x64) to work on my Windows 10 Pro PC but to no avail, that is until I came across this video, which provided a complete fix/workaround.
Thanks again Liam
Big Thanks! I tried anything...but the tipp with the advanced boot that ignores the driver signature was the best! Now it works!
+Tobi 1337 glad you are flying again. Why oh why can't DJI sort this for their customers. They charge enough..
OMG!!!! U save my life !! I tried to research for so many solutions unfortunately there is no one solution works for me but yours yeah!!! THANKS !
THANK YOU! After much frustration in trying to use my software again for the first time in a very long time, this was the fix that worked for me.
Had this problem, This video worked for me ... I spent hours trying to sort this and this video fixed it in under 10 mins !!! many thanks
You saved me a lot of troubles! This solution works perfect for WooKong-M on Windows 10 Home for me! Great tutorial and respect for geeting so much into what MS wants to be hidden or closing their solution more and more. Thank you!
Glad it helped! :D
Thank you for the video tutorial! Works perfectly! I fought with this to make the drivers work with their installer for a couple hours to no avail... I eventually just fired up my Windows 7 virtual machine. I figured the drivers simply were not compatible with Windows 10. DJI needs to start providing this workaround on their site/during installation or get the damn driver signed - it's a big fail that they have done neither by now.
+John Cuppi couldn't agree more.
+John Cuppi Hi John, Excellent news to hear the video has helped! They have been contacted by multiple people including myself about this issue. I can only imagine the reason they haven't patched it is because there is something in the drivers stopping them from getting it verified/signed and releasing a new version as it seems mad such a big issue they are failing to publicly address. That is just my opinion and not based on any fact/evidence however!
Thank you! You just save my life! Win 8 had problemas to communicate with my DJI Phantom 1, but all your advise made the trick! Thanks again ! Thumbs up!
After many futile hours I have made it thanks to yourens videos. Thank you
Always thankful for your videos, you have bailed me out lots of times. Clear, precise, and well documented. 👍
Also here i never have the chance to thank you for this video it been long time i been using my naza m lite thanks to you i was having problem to make this fly controller to work with my computer till i found this tutorial and i know many others guys had the same problem THANK YOU........for the tutorial...
I have the same issue with my PC not seeing the Naza. I went through the process of trying to reinstall the DJI driver manually, and of course Win10 in its infinite wisdom told me that the best driver was already installed and would go no further. Urgh!
Short of trying another computer, in my opinion this is inexcusable by DJI. How many years have we been designing drivers for Windows now? So much for a $160 canned flight controller solution as I sit here and admire my latest S500 quad build that I can't even configure sitting so lovely on my bench.
Thanks for the series Painless. I'm slowing learning more and more thanks to videos like yours. Some day I'll be proficient at this hobby. :)
Hi, thanks for this video, followed to the letter and Naza M Lite now talking with the DJI Naza software. I've had my Naza M Lite for 3 years and never previously had a problem until Windows 10 came along. I contacted DJI, who's only advice was to check Windows 10 had all updates & to re-download Naza M Lite Assistant software. Guess what that didn't work but your brilliant fix did; so thank you very much.
Thanks to Liam for such a great job!
Thanks for the feedback Gary, glad it got you flying!
Just did this on my Phantom 1 with NAZA 1.Worked perfect.Thanks.
Works amazingly perfect. In the process of taking my 4 year old DJI Flamewheel F450 and upgrading it into a long range rig.
Thanks Liam and Painless360, great work you guys!
No worries dude! Liam
Thank you so much for this video, sending you so much gratitude. I am really at the end of my tether with Microsoft becoming the ultimate cotton wool and bubble wrapped nanny state, where you can't do the things you need to do and you are forced to do things you don't want to do. Your method worked for me after various failed methods documented elsewhere that must have worked once upon a time but have since been locked down. I held on with Windows 7 until forced onto Windows 8 by duff vendor USB 3 drivers, held on with Windows 8.1 until my laptop broke and I could only get one with Windows 10. It's like Microsoft wants to make IT professionals who fix things for a living to run through mazes that stretch them but are utterly impenetrable to the lay person. My pet peeve is "your organisation requires you to change your PIN" when it is my computer and I am the only person who uses it and there is no organisation except me. I do not require my PIN changing because nobody except me has ever seen me type it. Anyway, rant over, it's now time to find out why my NAZA stopped playing nicely.
Glad you got it working. The easist fix would have been for DJI to spend a little of that money they make from their customers to get the drivers certified. But, they didn't bother despite seeing how much frustration and problems it caused. Anotuer example of DJI not caring about their customers? Happy flying
Wonderful - solution worked for us when so many others frustratingly didn't.
THANK YOU SO F***ING MUCH, PERIOD. You guys seriously got me flying again!! YESSSS!!! Thank the pixel gods this video finally popped up. After getting a new computer I couldn't communicate to my MATRIX drone anymore and knew it was a driver issue. I tried to figure out how to manually install the driver but of course there was no instructions that were detailed anywhere. I was so close too but gave up after many many hours of PAIN (the only thing I didn't know about was restarting in that specific mode). That was a couple months ago apparently before this video was even around. Man if only this was around then, my drone and the shelf it stands upon, wouldn't have so much dust on it... But now thanks to you I am PAINLESS!!! SCORE!!
Hi Josh, certainly had me scratching my head for a few hours! Glad you got there in the end
thank you so much! I've been troubleshooting this for 2 weeks
It worked for me windows 8.1 on a wookong S800 DJI.. thanks a bunch .. my first DJI.. I’ve been using apm..I really appreciate you!!!!
Excellent video. Nazam program works perfectly. Thank you so much. This was driving me crazy trying to get this to work. Watched the video and did just as it said and now it works as it should.
I know this was a while ago but thanks for posting as this worked like a charm. Many thanks.
Thanks, and yet DJI (despite how much they charge!) still hasn't fixed it.. What's up with that!
That doesn't surprise me in the slightest as DJI customer support is notoriously bad. At least their QC has improved judging by their latest products, like the Mavic, a seriously nice piece of kit.
You are a lifesaver I've been messing with this for two hours and this was the solution. Thank you thank you thank you
Glad it helped! :D
Thank you so much !!! I had a huge problem with connecting my laptop (Windows 10) with DJI Ground Station. Now it works great :)
Thankyou for taking the time to put this up.
Absolutely brilliant! Thanks for this video. Yet another obstacle out of the way thanks to these very useful tips.
+valderja you are very welcome. Happy flying
i was literally about to chuck my quad out the 19th level balcony.
love you. thanks
Love ya too! :D
You are my favorite person this month! Thanks a lot!
Thank you for this tutorial. Able to get my drone up and running again!
Thanks for the guidance!!!,..I am trying to change course so to speak,..I was a DJI fan,..P3,and Spark,..but bought a DJIF450 Flamewheel 6 months ago.Just realised that I've bought archaic gear,everything has "shrunk" in the last 3 years,haha,..and a Futaba T8J!.OMG,...but will try and build the 450 anyway.After realising my mistake,by reading various up to date UA-cam fpv channels,like your goodself,..I have now bought more modern gear,=almost "rtf" Furibee x215,an Armattan Rooster,and an iFlight XL7 kit (maybe to replace the 450? and make later in the year,if I can get my head around Betaflight of course..
It's going to be an interesting year for me learning how to build the f450 and fly the freestyle aircraft,with fpv goggles.Crash course so to speak!.
Best of luck with the build!
Thank you so much for saving me so much time. As someone else commented, why does Microsoft make everything so difficult
Sadly, I think this is down to DJI. The driver signing practice is to stop untested/badly written drivers from making onto your PC and breaking things. DJI make more than enough money to go though the process to get these drivers signed and approved (like almost everyone else does).. Come on DJI - support your customers! They're paying enough!
Thank you, I have others with cc3d, Naze, and I have gotten help from your videos so I thought I would try. I have sent a computer to my cousin who has it running and he thought he could get mine to also. I will see by next week, thank you again, take care. Greg
+Greg Cantwell best of luck!
Excellent first class info for Naza 32
Thanks a million for the help.
Did what the video mention.Work perfect.
Cheers from NZ
nothing worked. Then for fun I set my clock year to 2015 and it installed without all this unsigned driver bs hope it helps others
That worked perfect! I waisted so much time before I saw this comment.
YEEES! Worked for me also! Was trying to find the .inf file because it wasn't in my DJOI folder. After I saw this post I thought what the heck, 30 sec's and I was up and going with the DJI Assistant.
Just Amazing Trick U got bro it works fine, Thanks
@@kevinroach9380 Same Happened with me too. Haahaaaa
yep perfect for me cheers
thank you so much for the info...had problem with naza driver loading!!!! ty hot dam!!!! back in action...
This saved my ass on a really important project! Infinite thumbs up!!!
Wow 2020 and this still worked (at least for me) thank you very much
YOU ARE THE FREAKING MAN!!! This worked perfectly step by step. THANK YOU SIR!!!
absolute LIFE SAVER. Thank you so so much for this tutorial
No problem, glad my collaboration with Painless360 was helpful!
AFTER 10 HOURS OF MESSING AROUND I DID IT! THANK YOU SOSOSOSOSO MUCH
Glad to help, Connor!
I would have never figured this out thanks a bunch!!!
Thanks for the tutorial!!!!! You made it so easy!!!
Took me an extra min it was hiding in a different location but yes this works thank you so much do as he tells you & if you get stuck/don't work, go back in to device manager & locate one label dji/ and or naza & update that one it will then work I hope 🤞🏽
Thank you very very much. You made it easy and very clear on how to load up the drivers (Naza M). Too bad DJI can't seem to move faster w fixes......seems like they are always one OP behind.
Exelant tip haveing that exact trouble with a telemetry radio.
Thanks for taking time to make this video 😊
Thank you so Much!! Worked for me!! Why is DJI not updating their driver signature?
thankyouuu sooo much painless360.. youre the best!
Thanks!!! This fixed something I was unable to solve!!!
I found the root of the problems , and I believe that is the same for everybody else, the USB cables , they need to be good quality cables, and not the kind that come in all phones or things like that. Something like Belkin will do the trick. Then the change in the drivers can be done. Thank you guys.
Hi Carlos, this is a big point, a lot of cables you find will be intended for charging cables and the wires inside carrying the data aren't correctly insulated to avoid inference and errors when being used for a data function.
thank you so much liam I thought I was going to have to get rid of my phantom and get a new one as it is discontinued and it doesnt have any support anymore now connects to naza software
Thank u very much for the help bro, it helped me ❤️🙂
Fantastic, sorted me out superbly!
THANKS i did fix the problem with my comp thanks to you wow for a moment i was thinking naza m lite will be storage in the box for ever thanks for sharing......now the fly test.
No problem Juan, thanks for taking the time to comment!
That was an hilarious help for me. Thanks a lot
Thank you. Excellent instructions
Worked perfectly
Thankyou so much this is the best of the best tutorial of dji Naza M Lite I'll subs you dude
Very helpful and now I hope I can refer to this video in the future to help me through the process. Win-10 is a work in progress and has been a real learning experience for me. I have been in the Windows Insider program since it started in 2014 and have been getting the newest builds via the fast update setting. Some or very good and some have issues. No I don't know much (very little) about how PCs and things work, but I have been amazed at what I have learned even though I am a little long in the tooth.
+Lloyd Prunier Hi Lloyd, it is an interesting thing that is evolving faster than most techies can keep up! Glad you found the video helpful and informative!
Worked great, I did have to make some changes from the the video. I'm using Windows 8.1 and everything was the same steps as the video. The DJI driver is a .EXE file and no longer has a .inf file. I followed the steps in the video but never went into Device Manager, I just went ahead and restarted my PC in the "7) Disable driver signature enforcement" and connected the USB/NAZA to the PC and run the driver .EXE file and when I started the Assistant it works as it should.
This was good advice, it took care of my issue, spot on.
Great video very helpful thank you painless 360
Thank you so much for this!!! Guided me through and works a treat.
Very helpful!!! Thank you. Love your channel.
Brilliant video as always, many thanks for sharing.
great video as always, now what about when the naza don't even appear on the COM devices ? and that is in XP Vista and win 10 pc's, I try it already
Thank you for the video. I also got stuck with my Naza and Win 10 laptop.
Very many thanks. You have made my day!
This worked 100% thank you so much!
I have brought a Naza M lite.. and it is still on the way.. ad now you are telling us about naza.. that is a very good thing to hear.. and can I ask.. is it god if I upgrade naza m lite firmware to naza Mv2 firmware ????
+R A Dilan Darshana Hi There, The upgrade to V2 isn't support by DJI so wouldn't be suggested as has the possibility to 'brick' your Naza with no fix. With that said, many have had success with it but can't guarantee it won't cause problems in the future. I don't believe Painless360 have any plans currently to produce a Naza video series. Thanks, Liam
you were lucky then my friend. like I said it could be done on earlier stuff but the disclaimer I read said dji had done something to stop the hack (obviously ) and they were working on it. having said that I've had no problems with my m lites on any of my craft and if you want the full version I'd suggest buying it which not only gives you a guarantee but also pays towards new development which let's face it can only be a good thing ? glad yours worked ok
hack on v2
F ing brilliant! Thanks a ton I've been struggling with this.
Absolutely great vid, this has helped me loads, thanks guys
Thanks for the feedback, happy flying!
Best video on topic
Worked well. Thanks man!
Thank you very much for the help. Excellent job!!!!
Hei. Good. Maybe you are not even reading these posts anymore, but I have a question. I got a Phantom FC40 a couple of years back, flew once but no GPS so no "go-home" option in place, so I did what most did: I upgraded the firmware first, and then I was gonna try the "GPS Calibration". After upgrading the firmware, nothing worked, constant flashing yellow light, and that was the end. 2 years later after reading multiple posts, videos, etc., I was able to upgrade the firmware in the Phantom and its transmitter, I imported the parameters... but the main problem remained: After connecting the battery, a couple of green lights, and then a flashing yellow light. After reading and watching many youtube videos, I concluded (I think) that the problem seems to be the communication between the receiver and the transmitter. I tried changing to D-BUS, PPM (I even tried the
Traditional) but nothing: I always ended with the flashing yellow lights.
I found the solution "Press the Black Button that is inside the compartment" just a year ago. But, every time that I press the black button, no red LED lights turns on...
Any Help will be much appreciated, or this new Phantom is going to the garbage... (Maybe get a New Phantom II 5.8 Ghz Tx RF V3 and see if it works???)
+Felipe Arrate sorry, I don't use DJI kit personally. I'm surprised at how poor their support is despite the premium they ask. Sorry I can't be more help.
Thanks anyway for your help! You are right, is incredible how poorly they treat their customers...
Thanks for doing this video it is in my favorites so I never have to go through this again.