I just made your winder for my Kundo. I mounted the hook a little too close to the spring on the first try, so it wasn't holding out enough of the "tail" of the spring to work with on reinsertion, but after adjusting that, the thing was great! I also used 3/4" wood blocks for the barrel clamp thinking it might prevent scratching the brass a bit better . Also I used 1/2" copper tubing for the crank shaft and crimped the end around the hex body #6 tip from my spring let down set. It's a tight enough fit and allows me to just plug in any size tip that's needed in the future. (I know - us UA-camrs sometimes just can't leave well enough alone.) Many thanks Yan!
I just made your winder for my Kundo. I mounted the hook a little too close to the spring on the first try, so it wasn't holding out enough of the "tail" of the spring to work with on reinsertion, but after adjusting that, the thing was great! I also used 3/4" wood blocks for the barrel clamp thinking it might prevent scratching the brass a bit better . Also I used 1/2" copper tubing for the crank shaft and crimped the end around the hex body #6 tip from my spring let down set. It's a tight enough fit and allows me to just plug in any size tip that's needed in the future. (I know - us UA-camrs sometimes just can't leave well enough alone.) Many thanks Yan!
Thanks! Have a great day!
I really like the simplicity of your winder, I'm making one. Thanks
Thanks
Very nicely done. Thank you for sharing. I’m going to make one!
thanks1
Glad to see you're back making videos!
To many things happens during this 4 years!
Move to NJ , 6 grand kids .... Good things!
My wife and kids Kept me busy, :-)
Will this winder work for all barrel springs?
Yes
Great job. Will contact you soon
Where did you get your chuck i want to build a winder like yours? Thank you very interesting/
It's a tap wrench with the T handle removed.
where do you get the spring keepers? or did you make them? if so what did you make the spring keepers from? thanks
sleeve made from 1" tube
@@yankrasnopolsky thanks what about other sizes or are they all about the same? thanks much
@@bobpalmer4740 This winder designed only for Kundo and Schatz. Has only one sleeve.1`"