Water Level indicator with alaram
Вставка
- Опубліковано 24 січ 2019
- Circuit Diagram with detail tinyurl.com/2uhsmzjw
Water Level Indicator using IC tinyurl.com/water-level-indic...
We generally worry about the wastage of water, when we switch ON the motor and forget to turn it off. The Water Level Indicator employs a simple mechanism to detect and indicate the water level in an overhead tank or any other water container. We have posted already a Water Level Indicator and Controller using IC ULN2003. In this article, we are presenting a very useful, cheap and simple Water Level Indicator circuit using transistors (bc547) for beginners. This circuit indicates the level of water in the water tank using LEDs with transistors. you can use this project as a college project.
Circuit Components
4 - BC547 transistors
3 - 220-ohm resistors
3 - LEDs
1 - Buzzer
5 - 9v battery + battery clip/power supply
some pieces of wire
The connections arrangements are shown in the circuit diagram shown above. The +9V power supply or battery is used. In this circuit, we have used all the transistors as a switch. The water touches the wires’ contact with base of each transistor, a small current flows through the base and turns on the transistor as the transistor turns on, the LED connected to it glows. LEDs will be turned on depending upon the level of water. We have used a buzzer with the last transistor as water touches the base of the last transistor collector the collector and emitter connected and buzzer rings. The relay can be connected instead of the buzzer to auto control the water level in the tank.
Water tank level control
Automatically turn ON/OFF water pumps
It is used in factories, commercial complexes, apartments, home,
Fuel tank level indicator
Oil tank level control and indicator
High & low-level alarms
Pool water level control
Leach-ate level control
Cooling tower water level control
Sewage pump level control
Remote monitoring liquid
Pump controller Auto
Stream level monitoring auto
In my previous video i have made a water level indicator with in UNA2003 IC. Today I am presenting a very useful, very cheap and very simple circuit using transistors for beginners in the field of electronics. This simple circuit can indicate the level of water in your tank using LEDs as well it will alarm as tank will be full.
Thank you so much.. I found this video in 3rd number of search results. 1st n 2nd are normal. but found speaker in ur video. this video really helpful. and making this from items is very easy.
im thank full to you for my encouragement in lovely wording
dear your encouragement is my power plz always encourage me and visit my website for more circuits and for my promotion
www.envirementalb.com
@@gillanidata Already check ur website before your this msg😊
Ya i also noticed. This circute design is simple and clear. Very good thinking and creativity 🌹
I'm definitely going to build one like this and use a button to cut the power so any time I want a reading I just apply power and read the lights! I love it! simple and accurate!
Were you able to do it?
I am Algerian, I subscribe to your channel, because I saw your video and your way explanation, you are an exellent teacher, thank you very much for your frankness and simplicity. you deserve 1000 lik
envirementalb.com/simple-water-level-indicator/
you are right sir ua-cam.com/video/8fTX_q7BaNE/v-deo.html
Projeto maravilhoso.
Love this ❤️
thanx a lot plz visit my web for more amazing circuits
www.envirementalb.com
awsm it worked for me thank you
thanx a lot a very sorry for late answer plz visit my web for more detail bit.ly/2YzOn5z
Una idea formidable, gracias por compartir
thanku so much dear plz visit my website for my encoruagement thanx
www.envirementalb.com
Great work thanks I need that circuit..muy buen trabajo gracias ...
Circuit Diagram with detail tinyurl.com/y6kujez6
Water Level Indicator using IC urlzs.com/u2Gn9
Circuit diagram tinyurl.com/y52evcl4
Its working perfectly. Nice
yes this circuits works very well you can use any type of transistor
plz visit this for full deail bit.ly/2JwJ8zn
What type of sensor have to use
@@shoaibmomin5050 dear i did not use any sensor in this video plz ask again
plz visit this for full detail bit.ly/2YzOn5z
Thanks bro I got first prize in my school in science exhibition
thanx a lot plz visit my web for my promotion thanx urlzs.com/u2Gn9
Can we use normal electrical wires
ua-cam.com/video/8fTX_q7BaNE/v-deo.html
This is a good project for the beginner. Can it be used for by stepping down the voltage from 220v to 9V by step down transformer or any electronic item.
Excellent project! Actually, I need one of these!
This would be great for a sump pump system, to let someone know if the pump quit working and maybe even activate a circuit to turn on a backup pump.
plz visit my web for my promoition
bit.ly/35wmIFG
thanx plz visit my web for full detail bit.ly/35wmIFG
Links not working
@@Saheel.345 thanx a lot bro
plz visit my web www.envirementalb.com
thanks man you can give super idea
it is very usefull to us
Thanx a lot dear plz visit my site for amazing circuits
www.envirementalb.com
I’ll share your video with all my friends and subscribed too
thanx a lot dear i will be great full for your cooperation
please share my video and also my website
thanx
thanx
thanx
envirementalb.com/simple-water-level-indicator/
Looks local but u did a great job. I learnt something new
thanx a lot dear urlzs.com/u2Gn9
Great project!!!! What about a low level alarm instead??? Can you come up with something???
Yes it is easy
#technicianpc chanel subscribe please
@@newtechnicianpc2newtechnic413 bit.ly/35wmIFG
In this application such an alarm would be own all the time. What is needed is a circuit break switch to trigger an alarm.
yes you can use timmer with this circuit to turn off the buzzer
Does it work with other liquids?
Like non-conductive types?
I don't think it does.
You might need to use another methods like spring and a contact switch
no dear it will not work with non-conductive perfetcly
envirementalb.com/water-level-indicator/
Awesome DIY project and simple! Will ot work with let say 10 LEDs? Or need bigger battery? Thanks. All the best! 😁👍
Very nicely explained.
I am mechanical engineer but I will be able to make this myself.
Thank you very much.
thanx a lot dear
Most welcome
Thank you, I make this project successfully. 💛
can you plssss help me maam?? alarm lng yung gumagana sakin.😭
Hello. Good project. Two questións: How long the sensor cables must be to get the device functioning properly? Could it be 10 meters (30 feet), for example? . (Note: when I say "sensor" I mean the cables which are in contact with the water). By the way, I suggest to add a switch on/off to turn off the circuit when it is not working. This way the battery would last a lot more. Thanks, friend, and keep on projecting.
tinyurl.com/y29h53yc
@@gillanidata
The sound though XD
thanx for watching my videos i will do my best try to do good always
www.enviremenalb.com
@@gillanidata He is saying you never even watched your video once to make sure it was good; it wasn't. The sound gets turned up super high randomly. You broke my speakers and hurt everyone's ears. Nice fucking job. (I was going to link your video, but no, I'm linking "ua-cam.com/video/JmnX9FGezzU/v-deo.html" instead. I suggest you watch their video and then watch yours. Turn the volume up nice and load so you can hear everything on yours!)
Good project and well explained... Thanks...if want to add a buzzer off button, then where to attach
wonderful ! joao from Brazil
thanx bro and very sorry for very late answer
How can do it reverse, mean light blow up when tank empty
bit.ly/35wmIFG
dear use sensor wires in reverese position
thanx plz visit my web for full detail bit.ly/35wmIFG
Will it work in reverse if I use a pnp transistor tnx and best regards ( buzzer sounds when waters tank empty)
I think a circuit break switch such as a float switch would be more suitable to trigger an alarm when a tank in nearly empty.
@@dtriniboss most likely or a separate circuit, with a pulley with a floater in one end andna metal piece on the other end that touches another metal when the floeater reaches a certain depth and that completes the circuit that triggers the alarm
can i use with v 4v battery.
yes you can use 4v battery with out 220 resistor
mean to say remove 220 ohm resistors if you want to use 3 to 6v battery
plz
visit my web and clicks on 2 ads for my help
www.envirementalb.com
Fantastic , beautiful, good.
thanx a lot dear plz visit the same circuit in ic
envirementalb.com/water-level-indicator/
Very nice! I will attempt this!
thanx a lot dear make it and replay me after making i will wait for your response
Sir, can i use 100 feet long wire for sensior? My water tank Standing over the 3rd floor....
I want to know also......
@@cashndcary bit.ly/35wmIFG
@@cashndcary yes your can use it till 30 meters with normal wires
thanx plz visit my web for full detail bit.ly/35wmIFG
ua-cam.com/video/8fTX_q7BaNE/v-deo.html
EXELENTE PROYECTO....CUAL ES LA DISTANCIA MAXIMA DE FUNCIONAMIENTO?? y a que voltaje??
por lo que veo es de 9volt. usa una bateria . y otra cosa que es la distancia maxima??
@@cristianpatriarca4233 Normalmente el tinaco esta en el techo y el visor en el piso de abajo ...o mas pisos...ahora entre sensor (tinaco) y visualizador...puede estar a 3, 6 o 9 m o 12 metros....lo soporta las bateria de 9 voltios?
@@sertint thanx for replay to my subscriber thanx
Circuit Diagram with detail tinyurl.com/y6kujez6
Water Level Indicator using IC urlzs.com/u2Gn9
Circuit diagram tinyurl.com/y52evcl4
I tried it. It is working properly 👍
Thanks man works great,
I really dont know why.
Because when i measure water is has resitance of 1megaohm so it could not really flow some current to drive the leds but it still works. Can someone explain this?
Thanks
How long could it be extended the wire of Its sensor?
10mtr
All is ok, but you need to add a swich to turn off the alarm, if not, when it be full the noise will continue making sound for hours until the water level be reduced.
yes your are right dear thanx for suggession
plz visit my web and feed backs for my promotion i wlll be thankfull to you
tinyurl.com/y29h53yc
Its your choice you also dismiss the connection and also used button beacuse you pluged the battery and the circuit has work battery performance low and led cannot glow full and also change battery once in a week
yes dear you shoul put a turn off and switch with this circuit
envirementalb.com/water-level-indicator/
Nice video and great work
tinyurl.com/y29h53yc
Nice project 👍
Thanx a lot dear
Funciona con la gasolina ?
No se incendia ?"😕🙉🙈💥🔥💢💀😇" 😎
thanx a lot for watching my videos and visiting my web site plz keep watching my videos always i will be greatfull to you thanx
urlzs.com/u2Gn9
Funciona?
thanku so much plz visit my web for more circuit
envirementalb.com/water-level-indicator/
I would not try it with gasoline, it is risky even though is a low voltage
حساس مستوى الماء:
-04 transistors BC547.
-04 Résistances 220 Ohm.
-04 LED.
-Batrie 9V.
yes these are components dear plz visit my web for full detail envirementalb.com/simple-water-level-indicator/
أحسنت لخصت لنا الموضوع ماقصرت
I un buzer
PREGUNTA TAMBIÉN FUNCIONA EN UN TANQUE QUE PUEDA SER DE DIESEL DE CAMIÓN
Y SE LE PUEDEN AGREGAR UNOS 4 DIODOS LED MÁS PARA MÁS NIVELES
Y SI EL BUZER SE LE PUEDE PONER EN EL SEGUNDO O TERCER NIVEL EN LUGAR DEL LLENO
Muito bom vou fazer um pra saber o nível da caixa de água
Muito obrigado querido, por favor visite o meu site para mais detalhes e para a minha promoção
bit.ly/2YzOn5z
قمه الابداع يحفظك الله
شكرا جزيلا أخي أنا رائع لك
الرجاء زيارة موقع الويب الخاص بي للحصول على دوائر أكثر بساطة envirementalb.com/
urlzs.com/u2Gn9
I need this circuit. Plz made for me i will pay you.
dear where from you are...?
gillani data sensor wire ? Is there such a wire like that ? Never heard it
yes you can use any common wire as a sensor wire
there is not any specital wire for sensor
plz visit my website for more detail
www.envirementalb.com
ua-cam.com/video/8fTX_q7BaNE/v-deo.html you can do this
Nice little project, but the crap generic music is really offputting.
thanx for feed backs and encouragement i will change music in my next projects thanx plz visit my web for more simple videos bit.ly/2JwJ8zn
good day, I hope you are well, hey I liked your design, I occupy 2, one for my tank and another for my elevated tank, I would like to occupy them, but connecting them to the electricity supply, here in Mexico is 110 Volts. Can you support me with the manufacture of them and what would cost per piece, with everything and shipping? I occupy the cables that go to the water of 10 meters. I here, I would cut them at the distance desired according to the size of the tank. Thank you ..!! I remain at your orders in the following email to know your answer mortim730@gmail.com
@@timmorales7246 sorry for late ans
dear you should use two circuit one sould with elevated tank and one should with reserve tank when
your man (evelated) tank will be full then reserve water will come in other tank thorough over flow pap
and cut off relay should be connected with reserver tank
plz send me the pic of your tank location and requirement
then i will give you perfect idea
visit www.enveirementalb.com and send me pics
Muy bueno puede servir para casos de inundaciones como aviso. Muchas gracias
Muchas gracias por mi aliento querido
Por favor visite mi web para más detalles.
www.envirementalb.com
Excelente video 👍👍
Thanx a lot dear plz visit www.envirementalb.com for more circuits
One led is missing,,, 100%
Instead of led he had used a buzzer
@@uzairpatel3922 thanx for my help dear
Show de bola ! 100% util nota10 !!!
ok dear
Really superb... All the best.
thanku so much dear please visit my web for my promotion
www.envirementalb.com
Good job. Thanks.
thanx a lot for my encouragement dear plz visit my website for my promotion www.envirementalb.com
Nice job.
thanx a lot plz visit my web for my promotion
www.envirementalb.com
Clear explanation 👍👍👍👍
Best video in youtube 👍
thanku so much dear plz visit my web for my promotion thanx urlzs.com/u2Gn9
It's working fine with 9v DC battery but when I connect mobile charger the LEDs emits low light even when the wires are disconnected or not in water. Any idea?
Muito bomm👏👏👏 vou tentar fazer um também
urlzs.com/u2Gn9
need some way to limit the time the buzzer is active. thanks for your time. Good video.
Yes I'm going to upload my new video for this
Thanx a lot
www.envirementalb.com
can we connect positive terminal of supply directly to the anode of LED?
i think Anode should be connected to one end of 220 ohm resistor and another end of resistor should be connected to Anode of LED.
cathode of LED will go to collector of Transistor.
in short i wanna ask,are the positions of 220 ohm and LED are correct or they should be interchanged?
Nice projects
Genius.thanx 4 sharing
very nice ,do you know how much ohm for 5v and 12v power?I want make little change on full will be reley for the pump for water...
Use transistor with full led to control the relay
Very useful but simple gadget which can be made by average person. Also a good science project for high school student
bit.ly/35wmIFG
thanx plz visit my web for full detail bit.ly/35wmIFG
thank you for your video👍👍👍👍👍
thanx for feed backs and encouragement i will change music in my next projects thanx plz visit my web for more simple videos bit.ly/2JwJ8zn
Circuit Diagram with detail tinyurl.com/y6kujez6
Water Level Indicator using IC urlzs.com/u2Gn9
Circuit diagram tinyurl.com/y52evcl4
Terima kasih ilmunya kawan 🙏🙏 sdh lama saya cari video sprti ini💖💖,smg chanelnya mkin maju 👍☺auto padam merahnya bos😆😆
terima kasih banyak kerana menyukai video saya sayang
sila tonton video saya selalu untuk dorongan saya
thakuso sekali lagi
It's simple,,i love this....thanks bro
Thanx bro
Hi good video, thank u.
I have a query.
Instead of battery I have used 9V(500MA) AC to DC adapter.
I think its burning my transistor of the buzzer.
Let me know pls if i have to use the register, if so how much resistance and where to connect it? To collector or emitter of the transistor?
thanx for watching my video plz connect 1k resistor instead of 220 ohm then your leds will never burn
plz visit my web for my promotion
www.envirementalb.com
Thank you so much
you always wellcome plz visit my web for full detail
tinyurl.com/y29h53yc
Sir aapka video kafi accha lga mujhe
Very very very nice 😀👍!
thanx a lot plz visit my web for my promotion and more circuits
bit.ly/2HbGkWT
Very very good project
Thanx a lot dear
I tried, this is really working
Nice, very nice you're the guy
thank so much for my encouragement plz visit my website for my promtion i will be great full to you
bit.ly/2HbGkWT
Thanks for help
Could be quite a useful idea for any project .
thanx plz visit my web for full detail bit.ly/35wmIFG
great works......keep it up.....
thanx a lot dear plz visit my website for my promotion www.envirementalb.com
Great,I made it for my son and it worked
Thanx for my encouragement dear very very thanx
Plz visit my web for more simple projects
www.envirementalb.com
Thanks sir it's working concept . I am implement as per your guidance sir thanku very much
bit.ly/35wmIFG
thanx plz visit my web for full detail bit.ly/35wmIFG
ua-cam.com/video/8fTX_q7BaNE/v-deo.html
Hi I am Fan no. 1 for u Bhai appka video bahut aacha Laga ab 4 volt battary charger kit Bana do please jo full charge ya discharge ka led se kaise pata lagye
plz bhai isy visit krin apko pori detail say pta chal jay ga
envirementalb.com/battery-low-full-indicator/
Can you please make a water level controller that signals the pump to shut off when the water level exceeds a certain level and signals the pump to start when the level goes below a certain level?
It's how some sewage pumping stations work, duty start, assist 1 start, assist 2 start, alarm for raw sewage overflowing into a watercourse during heavy rainfall or high sump (wet well) level
sorry deal i did not understand your question plz visit my web for more circuit
www.envirementalb.com
will it function for deep well with 100 meters below ground level?
Is this advisable to use on fuel storage tank
Does this affect the water at all? And how long would the battery last? Looking to use in a hydroponics set up. Thanks for any info.
ua-cam.com/video/8fTX_q7BaNE/v-deo.html this will not affect the water u can use this anyware
Thanks that's successful ✌
thanx for my encouragement dear
plz visit my website for my promotion and for more interesting circuits
www.envirementalb.com
Could I use this system to measure the water level of a well? A 9V battery will be enough for a well of 10m deep?
yes it can measure the well water level
use 12v battery bit.ly/2Xs3Esi
Excelente !!👍👍👍👍
thanku so much for my encouragement
plz visit my web for my promotion
www.enviremetnalb.com
Nice one
But if I use 12V power then what should be resistor value or should I connect 1k resistor to the base as mentioned by someone below and which circuit is more useful ic based or transistor based.
Thanks
U can use 12v power supply in this circuit
U can use 1k resistor with sensor wire for caring but its not necessary
correct soldering? needs mechanical AND solder connection to work reliably
This guy tends to slap together stuff for demo, I suppose he's not implying a serious usage case would be done on a piece of wood with nothing holding the parts down. I'd personally use some epoxy board with thru holes doing all the soldering on the back side
@@manw3bttcks dear im using wooden piece just for making clear every thing
thanx plz visit my web for full detail bit.ly/35wmIFG
Awesome my dude
thanx a lot dear
plz visit www.envirementalb.com
Excelente!
Circuit Diagram with detail tiny.cc/sxp3cz
Water Level Indicator using IC urlzs.com/u2Gn9
I used the same components but my green and red led still glowing when slightly plz help me
Very good
Very clear vedio
thanx a lot dear plz visit my web site more deatil and more projects
www.envirementalb.com
muito bom projeto
bit.ly/35wmIFG
very nice concept.... if i want to use it for my water tank which is on 4th floor.. what are the modifications to that circuit? because the motor controlling is in the ground floor..
i will recommend you should ic instead of transistors for full detail plz visit these link
bit.ly/2W3VGoI
bit.ly/30vdd7F video
You can use the contactor , buzzer you change with dc relay 9v, n 1 NO can used like repeater for ac Supply to contactor coil n then 220/380 v ac can used for motor supply ...
thanx a lot asep m yusup for answering to my subscriber
thanx a lot plz visit my website www.envirementalb.com
Can you design the same for oil rather than water?
Awesome.👏
Circuit Diagram with detail tiny.cc/sxp3cz
Water Level Indicator using IC urlzs.com/u2Gn9
Good and interesting circuit I like it thank you
thanku so much for my encouragement
envirementalb.com/water-level-indicator/
Sir very easy se kiya I can understand
thanx a lot dear i will be great full for your cooperation
please share my video and also my website
thanx
thanx
thanx
envirementalb.com/simple-water-level-indicator/
Could you please provide the list of equipment in these experiment
Thank you very much
U wellcome sir
Muy bueno gracias
sorry dear i did not understand your question
Muy bueno gracias
am i gonna get electric grounded (if that's the right term) if i touch the water while it's turned on?
I have a query
If we put +ve wire in water tank and -ve wire through different different level will it cause electrolysis of water or not ,actually -ve wire is getting switched from emitter to collector ??
dear its dc no effect on water so plz use it with out any hesitation