greetings I have hyster 2t 1990 diesel. it has a problem when it is on idle gas, it will not raise the crane or very slowly when the gas is raised, nice and full crane and empty. Is it possible to adjust the lift somewhere on the distributor or on the pump? thank you
You can adjust the lift or tilt pressure on the main hydraulic control valve lift pressure should be about 3200 psi tilt 2200 psi I'd check oil and filter Condition and suction hose from tank to pump if there ok you may have a worn hyd pump . 👍🏴🦊
👍💯
Do you need refill the oil leaked?
👏👏👌💪🙏🙏🌹🌹
greetings I have hyster 2t 1990 diesel. it has a problem when it is on idle gas, it will not raise the crane or very slowly when the gas is raised, nice and full crane and empty. Is it possible to adjust the lift somewhere on the distributor or on the pump? thank you
You can adjust the lift or tilt pressure on the main hydraulic control valve lift pressure should be about 3200 psi tilt 2200 psi I'd check oil and filter Condition and suction hose from tank to pump if there ok you may have a worn hyd pump . 👍🏴🦊
@ColinAtkins-j3h thanks, i'll check the filter