I just saw your tutorial. I hope you purchased a clear acrylic ruler (used in quilting) to speed your cuts and eliminate those pesky little tabs. Thanks for your good instructions; I can’t wait to make one!
Thank you for doing the part your pretty wife can't do! Try cutting down the middle of the line, so you dont have to cut the little tabs off. A good sharp pair of sissors should be able to do it. Again...thanks for helping your wife feel productive. And thanks for a nice video. (try using popsicle sticks. Drill a hole in the center and feed the wire thru. Glue the centers and then stagger them.No beads needed)
Hello👋🙋♂️ there.. Amazing and very interesting project.. Super like👌👌👌 Thanks for sharing👍 Do keep posting new ideas💡💡💡 Warm regards and best👍💯 wishes✨✨✨ The UnknownManCub 👍😎👨🏭
Using a ruler (such as a quilting ruler) when cutting the plastic would be helpful to hold it in place. Also you always cut away from you when using a rotary cutter for safety reasons!
for the different lengths of cutting the canvas what are the lengths i know the first one that is if i remember it is 4 but from then on from the smallest to the largest i cant remember the different lengths
Thank you. I made a couple of these and I was hooked. Did I understand right that you sell them in a craft store? If so, do you have a picture of how you display them? We have a craft consignment store opening up in town soon and I'd like to display them there. Thank you so much.
My first time watching you, thank you for sharing. Loved your video you and Jack did a great job. I’m going to try and make some. Where did you get the plastic canvas from. Thank you.
Thank you for sharing. I was wondering do you know how to do the double and triple whirley gigs. That's what i call them. Please let me know again thanks and thank Jack too.
Great video, great instructions. I have a question, though. I come from Europe and would like to know what the orange mesh is and what kind of shop could I buy it here in Europe. What is its original use?
Rose and Jack, I love it!!! Thank you sooo much for showing us how to make these beautiful spinners.
It’s a good instructions thank you Rose and Jack for taking your time on showing us💐💐💐
Thanks Rose! Great project. I really liked how you and Jack explained each step.
Thanks Rose and Jack for making this video, the instructions were nice and clear and I was able to figure things out on my first try!
Rose and Jack. Thank you so much for your great instructions
Hi Rose! This was my first time to your channel and I really enjoyed your project. Every one of us Lupies needs a Jack! You're a beautiful couple! ☮️
Just beautiful . Rose you have gorgeous skin.
Hi Rose, I just finished my spinner. It's so pretty. Thank you so much for sharing sweet Rose. Hugs.......................
Thank you so much for taking the time to share how to do this! You two are wonderful!
Cab you show me how to cut the small corners al the bottom
I use to make them you do it different (501)762-4984
Fun!!! Nicely done and thanks for sharing. You guys did a great job!!!
I just ordered my canvas tonight, now to get the rest of my supplies. Can’t wait to get started. Thanks again
you are welcome thanks for watching I get a lot of my stuff at thrift store and garage sales
Thanks for sharing 👍 your experience with us. I'll be making them for sure.
Used to make them in my youth. It was loads of fun making. Hated cutting the wire clothes hangers though, but the rest was fun! :)
It helps if you color the end of the fishing line with nail polish or something to make easier to see.
I just saw your tutorial. I hope you purchased a clear acrylic ruler (used in quilting) to speed your cuts and eliminate those pesky little tabs. Thanks for your good instructions; I can’t wait to make one!
Thank you both for a great video tutorial. Many blessings to you.
I bought a couple of these years ago ,I've been wanting to make my own since then ,thanks for making this video
you are welcome thanks foe watching
Looks like a fun project. Thank you for showing and sharing.
Thanks no problem
Beautiful work, Thanks for sharing 👍
Thank you for doing the part your pretty wife can't do! Try cutting down the middle of the line, so you dont have to cut the little tabs off. A good sharp pair of sissors should be able to do it. Again...thanks for helping your wife feel productive. And thanks for a nice video. (try using popsicle sticks. Drill a hole in the center and feed the wire thru. Glue the centers and then stagger them.No beads needed)
I enjoyed your video. I love the twirler, I am going to make me one tomorrow. Thanks for sharing sweetheart. Have a Blessed Day.
Thank you for sharing I absolutely love this
when threading the beads on the plastic canvas, you can use a plastic canvas needle , it might make it easier for you rose.
Thank you so much working on one now while going along with you two .
How fun! Thanks for showing how to make them.
+Collene Stephenson You are welcome Have a great day
I made this wind twirler. It is very pretty and spins so freely. Have a Wonderful day. Hugs........................
thank you for the video it was a great help you both did a great job
You are doing a perfect job.
Thise spinners look beautiful but i will like to know the name of that material that you are using
Hi for me is more easy to use.neal clear polish,works verywell. Is so beautyfull. Tankyou beautiful job.Gadbless you.
Lovely! Thank you for sharing 😊
Great job looks fantastic love it
Hello👋🙋♂️ there..
Amazing and very interesting project..
Super like👌👌👌
Thanks for sharing👍
Do keep posting new ideas💡💡💡
Warm regards and best👍💯 wishes✨✨✨
The UnknownManCub 👍😎👨🏭
Great project you have here my new friend
These are pretty, thanks for sharing, but the camera was being moved when you explained how to make it swirl.
Thank you so much for yr explanation. Bless you.
what a sweet hubby.
where you put 2 beeds on by mistace. you could all ways crush the 2nd beed of with the pliyers. loved the video. x
thanks for letting me know its a good ideal thanks for watching
True
I love them…..so cute
Can you write this out I can not catch the count and the wire. Love this just Can not hear the count and name of the wire. How to get the middle count
Using a ruler (such as a quilting ruler) when cutting the plastic would be helpful to hold it in place. Also you always cut away from you when using a rotary cutter for safety reasons!
Love this idea,will definitely make these
I like it!
It looks very nice and very neat thank you for sharing take care
+rv lucky Thanks Lucky Have a great day
I cut my canvas wrong I have 5 little holes instead of three. Will it work? Do I need to do anything different?
You two are adorable!
Great team Work
Thank U so much for the vídeo
for the different lengths of cutting the canvas what are the lengths i know the first one that is if i remember it is 4 but from then on from the smallest to the largest i cant remember the different lengths
it is all three holes thank you for watching
Where do you purchase the material you are using?
Thank you for a great tutorial !
How long are the pieces of canvas
What size is the bead you are using?
Could you give list of supplies please thanks & God Bless
Ok what is the name of that wire ?
Rose you can just take some needle nose pliers and break one of the 2 beads you put in by mistake. I'm a beader so I've been there myself.
You have a supply list and how much do you sell for???
Can you post the measurements of the plastic canvas before and after it is cut?
I wish it was a little bit closer so I can actually see what I'm doing
How much do you sell them for? Curious what I can get for them.
Thanks for the video I find it easy to learn from them. Can you do a video of a couple layer of canvas. A more complicated one please thank you
Cdgriff
I love them. I can only find the clear plastic, where can I find the color plastic canvas?
😎👏🏾👍🏾❤️❤️❤️❤️❤️ will make some ~ ty!
Thank you. I made a couple of these and I was hooked. Did I understand right that you sell them in a craft store? If so, do you have a picture of how you display them? We have a craft consignment store opening up in town soon and I'd like to display them there. Thank you so much.
i typed wooden wind spinners where is the wood involved
Nice! 😎 and cool.
What is the strips called
My Grandmother used to make these!
My first time watching you, thank you for sharing. Loved your video you and Jack did a great job. I’m going to try and make some. Where did you get the plastic canvas from. Thank you.
at the craft stores and at garage sales and thrift stores
Thank you for sharing. I was wondering do you know how to do the double and triple whirley gigs. That's what i call them. Please let me know again thanks and thank Jack too.
just add differ ones together I have done that thanks for watching
what wire do you use please
Great video, great instructions. I have a question, though. I come from Europe and would like to know what the orange mesh is and what kind of shop could I buy it here in Europe. What is its original use?
it is called plastic canvas thanks for watching
Ema Krajčovičová you should find it on Amazon.com
I would like to know where you got the cutter.. My wife cut with a scissor , it's a real pain.. Looks great..
rotary cutter you can find at arts store or walmart
love these how much do they sellfor?
What is the brand name of the wire that u use on your projects?
Mary Sanders
It's called mechanical wire at most hardware stores.
Just make a small one it will look just as cute
Nice swearing neighbors!! lol
This is why traveling/staying in an RV park is so unappealing...have to deal with trashy people living on top of me.
You have great partner, I will try it some day
You seem so sweet. Thank you!