Very Good System, RCC precast panel installation to build the Boundary Walls. "Note That you have not applied protective coating on MS Channels" Kindly Considered this important Quality Control Issus. (to prevent it from weather's & soil effects.) Revisit Quality Control Plan, Procedure, Thank You.
Dear sir, once the walls are installed , the MS channel will not be exposed to air or water but thank you for the suggestion. Will keep in mind. Thank you
It looks like a solid compound wall. May not be cost effective as the cost for material, labour, transportation, installation adds up. Getting it done locally might be cheaper.
If we use brick walls, 1 sq. Ft will have some cement and max 6 bricks, 6bricks =60rs, cement, sand for plastering cost could be max 20rs +labour 20 = 100Rs
It still wont be strong as when done the old school. But even so with this method, i believe that the boxing placed around the steel beam should have been done same time when putting in steal beam. I also believe that although the wall is interlocking it should be cemented along the base...meaning it should be going down in poured concrete at base when lowering the wall
O vídeo em si ficou muito bom, mas poderia ter som com audio explicativo de cada etapa resumidamente para que impactasse mais a audiência e resultasse em mais interesse sobre o produto. A falta de audio reduz significativamente o interesse pelo produto por não gerar uma emoção e desejo sobre o produto. Abraço e precisando de uma consultoria estou à disposição: Harlen Ruiz de cá - Marqueteiro Digital e Social Mídia.
@@ConeccPrecast what would be the cost of 1Acre plot for boundry wall. Is is cost effective in comparison to conventional bricks wall. I have plot in Jharkhand
The wall isn’t dependent on steel channel as steel channel is used to strengthen the foundation only also it isn’t exposed to water and air but thank you for your advice. We will consider it
Foundation is only for pillar and wall foundation is near to zero the also the wall thickness looks like 4-5 inches a big thunderstorm will cut into two pieces from middle without argument.
The wall itself is self supported and doesn’t require any foundation. In case of strength, it is even stronger than a brick wall so if a big thunderstorm can take it down than even a house is not safe from it.
The problem we encountered with this type of wall in the USA was that if there's rebar in the walls for reinforcement, and the walls are not thick enough to provide that steel with good cover, the walls spall. I saw in the video the pouring of the Pilasters and they look plenty thick, but I must have missed the actual wall sections being laid up and poured...
The other problem we encounter in the USA is the price as i am certain contractors will want your first born child as a down payment just to order then get ready for the real cost
Those who likes these kind of pre-cast wall can buy but don't consider these types of precast wall for low budget compound walls. This is how the precast compound walls are marketed, they are quoting Rs.220/- per sq.feet within Karnataka.
Definitely sir. We are also not marketing as low budget precast walls as these walls are even stronger than a brick wall with textured finish so their price will be compared with brick walls not 2 inch precast walls. Thank you
@@ConeccPrecast I agree, your people are transparent during the enquiry. But it's generally marketed in youtube. BTW: how the iron rod in concrete will hold 3 ton of wall, don't we need additional support in the bottom.
If money is your only concern then just leave your land as it is. You want a boundary fence? get a barbed wire fence. This is mostly a fast alternative to boundary walls made by bricks or stones.
Very Good System, RCC precast panel installation to build the Boundary Walls.
"Note That you have not applied protective coating on MS Channels"
Kindly Considered this important Quality Control Issus. (to prevent it from weather's & soil effects.)
Revisit Quality Control Plan, Procedure, Thank You.
Dear sir, once the walls are installed , the MS channel will not be exposed to air or water but thank you for the suggestion. Will keep in mind. Thank you
Keval from uk.thanks for a very good reading and a related one.may u carry with the your good honest readings.god bless
Thank you
@@ConeccPrecast available in tamilnadu
@@MayaMaya-cl5lq yes sir
Idea is good but looks costly for rural areas but, affordable for metropolitan city.
In comparison to brick wall, it is more affordable everywhere sir.
It looks like a solid compound wall. May not be cost effective as the cost for material, labour, transportation, installation adds up. Getting it done locally might be cheaper.
If you will compare it with a local brick wall than we will be much more affordable sir
@@ConeccPrecast
Agreed
This is most effective and made more durable because it’s made under proper process with highly skilled people
If we use brick walls, 1 sq. Ft will have some cement and max 6 bricks, 6bricks =60rs, cement, sand for plastering cost could be max 20rs +labour 20 = 100Rs
Plastering is minimum 80 rupees per sq feet both side and also add cost of foundation sir
@@ConeccPrecast What is the psf rate of uour solution?
Waaaaaw nice , I also do they same job at Spain but we also House 🏠 to I like this job
Can you please text me on +918105241118 my WhatsApp number sir
Superb 💝💝💝💯💯💯🙏🙏🙏
Thank you sir
Was it expensive compared to cement bricks?
Iron bars mounted will rust with time... Do you have solution for it?
Iron bars are not responsible for strength of walls.
@@ConeccPrecast but it is what keeps the wall stand, no?
@@princessanineveh dear sir, wall stands on the footings not on iron bars. Iron bars are for footing strength and for extra security of wall panels.
200/sqft is a bit costly.
In comparison to brick walls, it is more affiliated
Can this installed upon already built laterite compound wall. Jus to increase the height?
Yes sir we can
@@ConeccPrecast how to get it done n kerala?
please call @6364000111
Wonderful work 😀👍👍👍👍👍
Thank you sir
Good job!
from Brasil
Thank you
Will these walls be strong enough like normally constructed walls?
Even stronger than brick walls
looks good...👍
Thanks 👍
But how can we provide lighting effect on this precast walls???
It doesn’t attract lightning sir unlike any building.
Nice
Thank you sir
Super 👌
It still wont be strong as when done the old school. But even so with this method, i believe that the boxing placed around the steel beam should have been done same time when putting in steal beam. I also believe that although the wall is interlocking it should be cemented along the base...meaning it should be going down in poured concrete at base when lowering the wall
If it will be cemented then interlocking fails and it might get cracked in future.
@@ConeccPrecast hmm...ok.
Will snakes go inside from the under area or after the wall is put,the gaps are filled afterwards?
No space will be left for snakes once the installation is done.
Snakes won't creep under the wall but they will climb over if they want something on the inside.
Amazing
O vídeo em si ficou muito bom, mas poderia ter som com audio explicativo de cada etapa resumidamente para que impactasse mais a audiência e resultasse em mais interesse sobre o produto. A falta de audio reduz significativamente o interesse pelo produto por não gerar uma emoção e desejo sobre o produto.
Abraço e precisando de uma consultoria estou à disposição: Harlen Ruiz de cá - Marqueteiro Digital e Social Mídia.
We will back with another video shortly sir.
45×35 feet ka compound wall L type two sides ka budget kitna hai.
Solapur Maharashtra me aap service de sakte hai kya
Not available for Plotings. Minimum area must be 1 acre
Bravo!
Thank you sir
Sir I wish to install it at Sindagi,distri Hingoli state Maharashtra l. Is it possible to transport here plz suggest me
Is this the only design or u have more designs
What would be the estimated price for 6 acres land
Please share you site location on 8105241118
What weight is each panel? Are the panels reinforced?
A single panel weights around 3 tons and reinforced with 12mm rebars
Good morning, seems interesting, I am planning a compound wall for my Kanakapura farm, the length of approx. 200 ft, do u take up work in Kanakapura??
Yes we do but we need minimum 1acre area or 800 feet sir
@@ConeccPrecast what would be the cost of 1Acre plot for boundry wall. Is is cost effective in comparison to conventional bricks wall.
I have plot in Jharkhand
If the iron got rusted in 5 years...the wall vill collaps ...
Yup, u r correct.... The steel channel installed supposed to be coated with anti -rust coats...
The wall isn’t dependent on steel channel as steel channel is used to strengthen the foundation only also it isn’t exposed to water and air but thank you for your advice. We will consider it
@@ConeccPrecast what will happen if the packet shaped end of the precast wall damaged...?
Just to clarify...
@@altain if it gets damaged while installation than we will replace it and there are no chances of any damage after installation.
@@ConeccPrecast where is your company
It will be good and easier if the wall was made from plastic and sand . much lighter. see plastic bricks videos.
Will think about it, thank you
Oh easy to build wall 🧱 nearest time'
Definitely
Sir is these wall available in Lucknow UP?
4000 square foot me banwana hai in Samastipur district in Bihar. Hoga ? Price kitna hoga
Service available for Andhra Pradesh or limited to specific State it self
Please call 8105241118
I.need job in precast company because i have more then 10 year experience in precast work
Where I get the its frame to prepare the wall at home
How can u built if it is a irregular area ..
By taking levels and we can drop or increase foundation height accordingly.
The problem here is the strength of the fence.. yayy..
Strength is even stronger than a brick wall as a single panel weights around 3 tons.
how much rate this precast compount wall ?
De lujo 🙏👏
Thank you
Is this service available in Ghana??
1000 running feet ,10 feet hight cost kya ayega , varanasi U.p. me service hoga kya
Please reply answer
Not available in UP sir
@@ConeccPrecast is it available in rajasthan
Pls focus on pan India delivery
We are currently working on it sir.
It might take some time
What will be cost for 50feet?
Approx 80k
I stay in lonavala city near to pune maharastra have any dealer who can do this job here
Yes sir we can
Do u provide services in Pune
Yes sir we do
Price for per sqft?
Bonjour
Est ce qu'il existe un joint de rupture au longe de mur de clôture
Sir.my quotation is .It is psc pannel or RCC?
Rcc
Rcc
Are you present in Pune?
Is it durable for outside the city
It’s durable everywhere
Do you provide your services in Maharashtra area
Yes sir we do
Do you have service in Erode, Tamil nadu?
Yes sir we do
Foundation is only for pillar and wall foundation is near to zero the also the wall thickness looks like 4-5 inches a big thunderstorm will cut into two pieces from middle without argument.
The wall itself is self supported and doesn’t require any foundation. In case of strength, it is even stronger than a brick wall so if a big thunderstorm can take it down than even a house is not safe from it.
are u provide in outside state
Please tell me your state and city sir
Lifespan? Because brick wall can stand for hundred years
Definitely it’s strength and lifespan is twice as a brick wall
Cost for 1 acre land ?
Please call 8105241118
The problem we encountered with this type of wall in the USA was that if there's rebar in the walls for reinforcement, and the walls are not thick enough to provide that steel with good cover, the walls spall. I saw in the video the pouring of the Pilasters and they look plenty thick, but I must have missed the actual wall sections being laid up and poured...
Wall thickness is 5 inch here and we are using 12mm rebars so there’s no such issues with us.
The other problem we encounter in the USA is the price as i am certain contractors will want your first born child as a down payment just to order then get ready for the real cost
@@bc5891 😂😂😂...we'll just do old school way
@@ConeccPrecast i need job in precast company .i have more than 10 year experience in precast company as a foreman
😂🎉😢😮😅😊yhhhh
In pondicherry?
I ain't gon lie after seeing the hydra on site I thought the vid was gonna end with it on its side being upright by another crane
Yes it might happen but the hooks are installed with a proper calculation of center of mass on the wall so it is equally balanced.
10 acre Approximately price ?
Please share your site location and send details on 8105241118.
Is it cost effective as compared to
Routine compound wall construction
Definitely is it is more affordable
Moro no Brasil gostaria muito de fabricar estás placas aqui vcs vendem a tecnologia?
Please share your queries on English sir
What is the cost per sqft
2 acre ge yestu amt agutte sir..
Please call 8105241118 and share the location with us.
Will it suit for slight cross plot?
Yes please contact 8105241118
Can we use this for house compound wall purpose?
Yes sir, please call 8105241118
Details pls for kerala
Is it available in madhya pradesh?
Not yet sir
What will be cost
Please share your location and area on 8105241118
Is it available in Trivandrum, Kerala?
Not yet sir
@@ConeccPrecast ok thanks 👍🏻
Will b costlier than normal walls
No sir
Where are you located , can you install at Hyderabad and warangal ( Telangana state ) . What is the cost ? Share more details
Please call 8105241118
@@ConeccPrecast cost per running feet
Available in Telangana state
Do u have services in hyderabad
Yes sir
@@ConeccPrecast please share contact details
Is it available in haryana??
Not yet sir
Available in maharashtra ?
Yes sir
price for 100 feet?
actually I need 1000 feet
Please call 8105241118
West Bengal available
Can you come? kerala
Not yet
AFTEC ?
No sir it’s better than that as it’s CONECC
Because Aftec and Verti Crete have a patent for such technology. I am the licensee of these companies. Do you have a patent for this technology?
Centre steel not enough for strong
Central steel is not for wall strength instead it is for footings
Can I build house in this?
No
@@ConeccPrecast is there any plan in future to manufacture wall pannel. I love the way it looks, i need to build a farm house in Mysore.
@@sachina2294 no sir, no plans till now.
4 acre ka kitna charge lagega
Please call 8105241118
@@ConeccPrecast ok
Those who likes these kind of pre-cast wall can buy but don't consider these types of precast wall for low budget compound walls. This is how the precast compound walls are marketed, they are quoting Rs.220/- per sq.feet within Karnataka.
Definitely sir.
We are also not marketing as low budget precast walls as these walls are even stronger than a brick wall with textured finish so their price will be compared with brick walls not 2 inch precast walls.
Thank you
@@ConeccPrecast I agree, your people are transparent during the enquiry. But it's generally marketed in youtube. BTW: how the iron rod in concrete will hold 3 ton of wall, don't we need additional support in the bottom.
the iron rod had no part in holding the wall sir instead the wall will rest on the footing around irod rod.
Its tamilnadu avaipable
Pondichery
Minimum area must be 1 acre and we can work in Pondicherry
👍👍👍👍
✌️
Sir Share location
If it’s not saving you money then what’s the point?
It is definitely saving money in comparison to brick wall sir.
@@ConeccPrecast u have the numbers?
If money is your only concern then just leave your land as it is. You want a boundary fence? get a barbed wire fence. This is mostly a fast alternative to boundary walls made by bricks or stones.
2 acre price
Please share your Details on 8105241118 sir.
Service in kerala
Not yet sir
Is this available in up mathura
No sir
cost??
Please contact 8105241118
do you have service in west bengal?if yes then where and how could i contact?
Not yet sir
Please send price for 800 feet
Please call 8105241118
Can't hear ya!
Sound is turned off due to some copyright violations sir.
Andhra pradesh
Please call 8105241118
@@ConeccPrecast Salem ?
Is it available in Assam
No sir