DIY Bling Tumbler with Vinyl Name
Вставка
- Опубліковано 25 сер 2024
- This is a quick tutorial on how I do vinyl names on my bling tumblers. This custom bling tumbler is covered in over 3000 hand placed glass rhinestones. Colors used are, ‘Crystal AB’ and, ‘Neon Pink’. Thank you Lindsey for your order.
WHAT I’M USING
*Neon Pink Glass Multi-Pack: becreateful.co...
*Bob Smith Industries 30 minute Slow Cure
*Starbucks Double Wall 24 oz. Acrylic Tumbler
*Disposable Lip Gloss Applicators: www.amazon.com...
*Crystal Katana
*’Flatback Flipper’: thetumbleruniv...
*Not affiliated with Starbucks*
_
MY OTHER SOCIAL MEDIA’S
Instagram: www.instagram.com › theblingbabyyThe Bling Baby
Tik Tok: vm.tiktok.com/...
_
E-MAIL
info@theblingbabyy.com
What is the name of the font and where can I find it I love it
That’s amazing! You are so talented!
Thank Youu
Absolutely Gorgeous
Love it 😍 came out beautiful 🤩
Thank you ✨💎
This was a good video Fr… I feel like I can do it now
Do you happen to remember what font you used?
Can I use any cricut machine ?
“Cricut joy machine”
Thank you- awesome video!! 💗💗💗
I saw that you used Krystal glaze on a Stanley (TY for that video b/c I'm working on a Stanley & have that glue) but why not use that on this cup? I'm don't want to use Epoxy on anything but want to make sure it will be strong for my clients
This is beautiful-
Thank you so much girl
OMG. This is GORGEOUS!!! Where is the music from?
It’s from a royalty free site I forgot the name exactly I’ll make sure to list it in the description once next time. 💖
How you get the name sticker please?
Cute. I want one 😍
How long do they normally take to make
Hi there! WHich font did you use?
Love it!!
Thank You!!!!!!
Very nice
Please help me from where you get the equipments glues and strass to design the cup???
What kind of glue? 😊
What font did you use?
Do you use the same size stone around the name or do vary them size to fit around that? TY
I use various sizes. Usually a 5 MM with smaller size stones filler stones to keep lines straight on the taper like 2 MM’s up to 4 MM’s.
Can you use any other glue like gorilla glue etc ?
What do you do to keep your stones from not coming off?
You need to prep your surfaces for best adhesion. Think like when you get your nails done. 💜
What are the two main sizes you use
Omg!!!!!! Can I buy this from you what do you charge?
How much do you charge?and where can I order one?
How do you put your line markers on the cup?
How do I know the length or size of name? I have 20oz cup
Honestly I eyeball it and go off of the length and type of font of the name .
What sizes in the stones you used
Hey love this can I ask why you use resin over say gem tac? X
Hi Vicki personal preference and faster cure time. Gem Tac is good too.
Do you have to put something on them after it’s completed ? And how long do you let it sit to cure?
Curing time varies depending on the glue that you choose to use. It usually will say it on the package. For most craft glues like Gem Tac and Supertite I would wait about a week before washing.
Did you also sand the cup?
Hello beautiful! Did you paint the cup?
Yes I do
I really hope you see my question and reply ☺ hi, my question is, wouldn't it be easier to use the bling sheet, leave a small space for the name, the use identical bling stone to fill in around the name?
Although that is a time-saver, you wouldn't get the desired result. You don't get the same mobility with a bling sheet. That's a great question!
@@KickinItWithKrys thanks for answering
Honestly I do not have much experience with bling sheets! I should try it out though! 💖
Love! Is that an acrylic tumbler and what grit sandpaper do you use?
Hi I use 120 grit 💎✨
Did u paint the cup or lid silver first?
So with the glue, when you started working on the whole tumblr did you just put the glue all over and then apply the bling or just apply the glue line by line?
You can do a little section at a time. That way it doesn't get too messy as you work.
With this glue I do little sections at a time because it is time sensitive. I have about 30 minutes working time give or take depending on the temperature of the room. 💎✨
Do you have to apply anything on the final product to seal the stones permanently?
No just make sure to prep properly and whatever glue you choose to use needs to cure 💖
@@theblingbabyy1111 what do you mean by cure?
@The Bling Babyy thank you so much
@@olgalidiatelix268 the easiest way to think about it is to let it “dry” but curing is like a chemical process that creates a strong bond after a certain period of time.
For the cold cup is it the same glue you use?
For the cold cups I use a glue called Supertite Fusion Tack
How many rhinestones of ss20 do you think you used?
You’ll need 3000-3500 but fillers ( smaller stones for tight spaces ) too around names and on tapered cups.
Do u paint the cup first? Or spray paint?
I have done both it's personal preferance
How much you charhe for this one
What size font is the name on the cricut?
Hi, its called Joseph Sophia
@@kayyyy1017 They said 'size'.
Honestly I just eyeball it to fit the cup since some names are shorter and longer .
Do you have to use a face mask when using that glue???
You can. It’ s not to bad with the fumes and I only use a little at a time.
How long did it take you to make this cup?
These take me around 6 hours plus
How do I print out the name like that?
Buy vinyl papaer ?
Hello beautiful I’m here !!! I found you
Hello! Happy to have you!! Thank you 💎✨
What do you use to print the names out?
I use 120 grit lightly 💎✨
Cricut or a Cameo machine
@@ericacamp2468 Cricut ✨💎
How can I contact you?
E-mail is the best way info@theblingbabyy.com
And thats just pink vinyl
Yep
What font are you using?
Joseph Sophia