I bought it from offline electronics store. I didn't get the exact one. Check this, 6 pin: robu.in/product/6-pin-jst-xh-2-54mm-pitch-plug-and-socket-with-cable-3-pcs/ 8 pin: robu.in/product/8-pin-jst-xh-2-54mm-pitch-plug-and-socket-with-cable-3pcs/?gad_source=1&gclid=Cj0KCQjw6oi4BhD1ARIsAL6pox0x2I9h4ESwJyo_J1K7CvrV-Fm4ayAFg2uN-bWPB9MS0qrToHMaSrMaApb1EALw_wcB 10 pin: robu.in/product/10-pin-jst-xh-2-54mm-pitch-plug-and-socket-with-cable-2pcs/?gad_source=1&gclid=Cj0KCQjw6oi4BhD1ARIsAL6pox2TOsFT1V-2p9PkkvSBmOdHoBKrEQIJzlLmzhGG5pPfodwpp4xjD_caAtWnEALw_wcB
Oh furniture snap latches, i haven't thought of that! Given i'm making my own shifter firmware (stm32Ff103cbt6) i am thinking of making an X-axis analogue and endstop switches on the Y axis. Also thinking of making it 6+1 but i don't know... i don't need more than 5+1 for ETS2/ATS and most faster games where you might drive 5/6-speed cars, one is better off with paddle shifter... can't quite decide. :D
Bro my ffb worked before but didn't use wheel in 1 month's so now ffb doesn't work when I connect smps I hear squeeking noise and and wheel disconnect before ffb was way to powerful meaning my wheel would literally fall off
![DIY Force Feedback Steering wheel | Circuit and Software Setup [in ENGLISH] , DIY Sim Racing Wheel](http://i.ytimg.com/vi/crdDhvhBG0M/mqdefault.jpg)
Very nice and easy to follow thanks for the tutorial. Really appreciated your work
Welcome 🙂❤️
Where can i get multiple pin connector... Can you provide the link..??
I bought it from offline electronics store. I didn't get the exact one.
Check this,
6 pin: robu.in/product/6-pin-jst-xh-2-54mm-pitch-plug-and-socket-with-cable-3-pcs/
8 pin: robu.in/product/8-pin-jst-xh-2-54mm-pitch-plug-and-socket-with-cable-3pcs/?gad_source=1&gclid=Cj0KCQjw6oi4BhD1ARIsAL6pox0x2I9h4ESwJyo_J1K7CvrV-Fm4ayAFg2uN-bWPB9MS0qrToHMaSrMaApb1EALw_wcB
10 pin: robu.in/product/10-pin-jst-xh-2-54mm-pitch-plug-and-socket-with-cable-2pcs/?gad_source=1&gclid=Cj0KCQjw6oi4BhD1ARIsAL6pox2TOsFT1V-2p9PkkvSBmOdHoBKrEQIJzlLmzhGG5pPfodwpp4xjD_caAtWnEALw_wcB
Wow nice 👍 finally it’s out
Thank you 🙏
Oh furniture snap latches, i haven't thought of that!
Given i'm making my own shifter firmware (stm32Ff103cbt6) i am thinking of making an X-axis analogue and endstop switches on the Y axis. Also thinking of making it 6+1 but i don't know... i don't need more than 5+1 for ETS2/ATS and most faster games where you might drive 5/6-speed cars, one is better off with paddle shifter... can't quite decide. :D
Keep both options, Even I feel for manual 5+1 is sufficient.
Good, bro.... All the best
Keep doing
Thank you♥
Brother can i use 8mm shaft for steering wheel?
You can use.
More power to you
🙂❤️
Amazing bro❤
Thanks🙂
Can i use 50k ohm potentiometer instead of 10k ohm in pedals? With the same circuit?
How much watt and volts power supply can i use for 775 DC moter in this build?
Yes you can
you can use 12v an 15a for 1 motor. If you use 2 motor, you must use 24v 5a
👍
Bro what is the cost of full steering setup please reply
Around 8.5k
@techathome for all
Thankyou for your reply
The majority of amount spent on components used in the wheel.
For rig, pedals, shifter I have used most of the available unused wooden pieces.
🔥🔥🔥 super bro
Thank you ❤️
Good
Thank you
Bro when we are doing ffb steering wheel first we should upload the code
Yes, this video will show you all the steps: ua-cam.com/video/crdDhvhBG0M/v-deo.html
LETS GOO🎉🎉🎉🎉
♥👍
bro u should make a racing sim company
♥
How much it costed
Total around 9k. The components used in wheel are costly. Rest are made using cheap wood pieces.
Diy 2 dof motion simulator bro
This will be our future project.
Thank you for feedback.
btw name of that jeep game please
Mudrunner
Brother please use printer encoder as this encodee is very costly
I am not getting that encoder. I tried finding it in many printer repair shops.
Do you have any product link online?
bro please provide bus mod link
ITS ETS2
Great bro 👌 👏,
Why can't you sell it as a product, bro?
Thank you!!
To sell it I have to improve the hardware design or may be 3D print. Here most of the waste wood pieces are used.
@@techathome yes bro, it looks good, but as you said you need to 3d print some parts
❤
Bro my ffb worked before but didn't use wheel in 1 month's so now ffb doesn't work when I connect smps I hear squeeking noise and and wheel disconnect before ffb was way to powerful meaning my wheel would literally fall off
Bro explain it correctly