Yes it would in my opinion and comfortably at that. I went into the garage and measured from outside of left front leg to outside of right front leg ~ 20.875. Laurie and I will be capturing video tomorrow. I'll take a picture of our Koda 16 on our table in vertical orientation. I' post a picture or to on out Twelfth Avenue Cuisine page. Will be later in the afternoon.
Here is the link to the video on our FB page. Hopefully this provides helpful information and thanks for asking the question. facebook.com/watch/?v=345320003380493
When I replayed your video it looks like you're missing some steps. How do you make sure that bottom shelf is not going to fall if it gets too much weight on it, there isn't a hole so it looks like you push the screw-in as far as you can and tighten it. I'm having a tough time getting the bottom shelf even. I guess I'm going to have to download the company's website on my computer for more in-depth instructions.
I apologise for the delay. Yes it is a friction stlye fastener so you can vary the shelf height. If you looked at our table today you'd see I too have an uneven lower shelf. As to overloading the bottom shelf we just don't place heavier items down there. Not ideal but it is functional enough for our needs.
Hi. Thank you for the video. I for some reason was assuming you were going to put the whole thing together on the video, but you stopped when you were putting on the casters?
Sorry if you wanted more info. But we use the table for prep in all our videos. We haven't used it for our oven because of the angle of our video. It fits when we stand at the end of the table but for our videos we need the oven to sit facing our camera. The table is too narrow for the oven. Laurie
Thank you Jim for checking out the video and taking time to comment! I was very happy when UPS dropped it off to see no damage from shipping and all parts were in the box. 👏 Assembly was easy too fortunately.
There is a table with a backsplash that is available. We don't have the skills to weld anything on or do construction. We use our table for prep. We use a U line garage storage rack to support our Ooni. It is more evident in our other videos. Check out this link. www.uline.com/Product/Detail/H-6259/Stainless-Steel-Workbenches/Standard-Stainless-Steel-Worktable-with-Backsplash-and-Bottom-Shelf-48-x-30?pricode=WB9496&gadtype=pla&id=H-6259&gclid=Cj0KCQjwna2FBhDPARIsACAEc_XClgdTOFd_rc2ogHaNC58n29HLP7_-hPHnkmP8RAEFCtxHIc82Pr0aAq_rEALw_wcB&gclsrc=aw.ds
Hi, Ray, happy Thanksgiving. If it is like the US holiday, it will be a busy but joyous time with family and friends. Too full to eat pizza. Enjoy your holiday.
Great question! Costco lists a 430 stainless steel grade specification for this table. If true, it is my understanding stainless steel grade 430 contains straight chromium and is known for its good corrosion resistance. The molybdenum content enhances its corrosion resistance. Maybe we'll be lucky enough to have a metallurgist comment! 🙂
Very nice table. Will the ooni fit vertical on the table?
Yes it would in my opinion and comfortably at that. I went into the garage and measured from outside of left front leg to outside of right front leg ~ 20.875. Laurie and I will be capturing video tomorrow. I'll take a picture of our Koda 16 on our table in vertical orientation. I' post a picture or to on out Twelfth Avenue Cuisine page. Will be later in the afternoon.
Thank you guys, l love your vids
Here is the link to the video on our FB page. Hopefully this provides helpful information and thanks for asking the question. facebook.com/watch/?v=345320003380493
You can get one that is 30x30 or 30x36 on Amazon.
We wanted room for prep and this was only $129 at Costco. Thanks for checking in. Laurie.
When I replayed your video it looks like you're missing some steps. How do you make sure that bottom shelf is not going to fall if it gets too much weight on it, there isn't a hole so it looks like you push the screw-in as far as you can and tighten it. I'm having a tough time getting the bottom shelf even. I guess I'm going to have to download the company's website on my computer for more in-depth instructions.
I apologise for the delay. Yes it is a friction stlye fastener so you can vary the shelf height. If you looked at our table today you'd see I too have an uneven lower shelf. As to overloading the bottom shelf we just don't place heavier items down there. Not ideal but it is functional enough for our needs.
I found this table to be too wobbly.
Sorry to hear the table did not work for you. We use it as a prep table not to hold our Ooni, so it works fine for us. Laurie.
Hi. Thank you for the video. I for some reason was assuming you were going to put the whole thing together on the video, but you stopped when you were putting on the casters?
Sorry if you wanted more info. But we use the table for prep in all our videos. We haven't used it for our oven because of the angle of our video. It fits when we stand at the end of the table but for our videos we need the oven to sit facing our camera. The table is too narrow for the oven. Laurie
I bought a similar unit from restaurant supply on line. They are great and can stay outside year round .
Thank you Jim for checking out the video and taking time to comment! I was very happy when UPS dropped it off to see no damage from shipping and all parts were in the box. 👏 Assembly was easy too fortunately.
The unit I bought was 30 x 36 so it was a little deeper. Could have bought a 30 x 48 which would have been better.
Our portable table is 32 x 32. Good depth for the Ooni.
Need a backsplash!!!!
I don't understand your comment. Laurie.
I believe a 2-4 inch piece of steel, perpendicular to the surface on the back of the table would prevent items falling off the table.
There is a table with a backsplash that is available. We don't have the skills to weld anything on or do construction. We use our table for prep. We use a U line garage storage rack to support our Ooni. It is more evident in our other videos. Check out this link.
www.uline.com/Product/Detail/H-6259/Stainless-Steel-Workbenches/Standard-Stainless-Steel-Worktable-with-Backsplash-and-Bottom-Shelf-48-x-30?pricode=WB9496&gadtype=pla&id=H-6259&gclid=Cj0KCQjwna2FBhDPARIsACAEc_XClgdTOFd_rc2ogHaNC58n29HLP7_-hPHnkmP8RAEFCtxHIc82Pr0aAq_rEALw_wcB&gclsrc=aw.ds
I see in Canada that the table doesn't include the casters. Did you have to add them and if so do you have a link?
This table could be ordered from Costco with or without casters. Thanks for watching. Laurie.
Just catching up with your video's. You and your lovely wife are doing GREAT JOB!! THIS IS OUR THANKS GIVING long weekend. Stay safe...
Happy Thanksgiving Ray!
Hi, Ray, happy Thanksgiving. If it is like the US holiday, it will be a busy but joyous time with family and friends. Too full to eat pizza. Enjoy your holiday.
Is the bottom shelf height adjustable or not? Thanks!
Hi Nelson, yes the bottom shelf is adjustable. And thank you for watching and taking time to ask a question. Much appreciated. 👍
can the table be left outside?
According to questions on the Amazon site,, it can be used outdoors. It is sold on Amazon and Costco.
Great question! Costco lists a 430 stainless steel grade specification for this table. If true, it is my understanding stainless steel grade 430 contains straight chromium and is known for its good corrosion resistance. The molybdenum content enhances its corrosion resistance. Maybe we'll be lucky enough to have a metallurgist comment! 🙂