Thanks for taking the time. But next time (if there is one) try to steadily film what you're plugging into so we can get an actual visual of the jacks you're utilizing on the back of the amp.
I just got my today. My friend got it last week he showed me how good it worked with his 30 watts silvertone head from the 60’s so i was happy when i got it today i have a marshall dsl 40 cr i had it for 5 min on 40 watts high setting master at 3 o’clock, volume at 1 o’clock, gain at 10o’clock and smoke came out of the box. Had it in the right 16ohm input and it sounded good turned it down to 30-40 on the bugera volume wheel. To bad. I got it for 49 dollar deal but i dont thing its a good thing.
@@OnlineHustleDad Yeah thanks i send it back. I ordered from thoman germany Harley Benton PA-100 Power Attenuator Has lots of good reviews and price is great
You left out the most important part. Put your Amp on 6+ and adjust the Bugera accordingly. Here's what I found very quickly ....Get rid of my ODR1 overdrive... Keep my Deluxe Reverb on 6 and keep the PS1 on my Mic Stand tray and adjust it from 30 ( heavy overdrive ) to 100 ( just a little overdrive ) and use my guitar volume controls accordingly to play live .
Just get a volume attenuator like pedal Jhs makes one that goes into your effects loop and that will quiet your amp for you I have something like that for my hot rode deluxe. It should be cheaper than the bugera. I got mine on eBay. If you have equalizer pedal you can do the same also. Bugera should work I would check the speaker if it is 4, 8, or 16. Here is the JHS Little Black Amp Box Signal Converter - amzn.to/42ZL2Pv
@@OnlineHustleDad Thank you for the answer! Eventually, if I use a Boss Eq pedal as volume pedal, is it the same as if I use the Jhs pedal you mentioned? Thanks again.
Thanks for the explanation, I do appreciate but...as sjs793 said, it was not really clear what cable you meant going to what jack. You kind of just floundered as if you were thinking about it as your went. To be honest I could not tell what cable goes where from your video. I love that your shared but remember those that do see your video know even less that you do. So you have to be explicitalty clear which cable goes to what jack. At one point you grabbed one cable and said "this cable goes to the 4 ohm jack", then your change the cable you where holding????? Which one? The first or the second? I hope this helps. Plan what you are going to say might help also. Please take no offense....
I hope this has helped to set this up for your amp. Please let me know how it went. Thanks, Greg
Thanks for making this. Helped me set mine up!
Glad it helped!
Thanks for taking the time. But next time (if there is one) try to steadily film what you're plugging into so we can get an actual visual of the jacks you're utilizing on the back of the amp.
Thanks for commenting on the video
And also get someone to do the speaking for you as your voice is excruciating to listen to
@@OnlineHustleDad Thanks, even though it was a bit of shaky cam job ;)
@@WilliamBodenhagen thanks for watching and commenting on the video.
@@svenzia thank you for watching and commenting on the video
I just got my today. My friend got it last week he showed me how good it worked with his 30 watts silvertone head from the 60’s so i was happy when i got it today i have a marshall dsl 40 cr i had it for 5 min on 40 watts high setting master at 3 o’clock, volume at 1 o’clock, gain at 10o’clock and smoke came out of the box. Had it in the right 16ohm input and it sounded good turned it down to 30-40 on the bugera volume wheel.
To bad. I got it for 49 dollar deal but i dont thing its a good thing.
That sucks if you got it at sweetwater I would call your sales person to see if they can send you a replacement or refund.
@@OnlineHustleDad Yeah thanks i send it back. I ordered from thoman germany
Harley Benton PA-100 Power Attenuator
Has lots of good reviews and price is great
Can I still connect the speaker cable to the ps1 even without a speaker cable connector?
You left out the most important part. Put your Amp on 6+ and adjust the Bugera accordingly.
Here's what I found very quickly ....Get rid of my ODR1 overdrive... Keep my Deluxe Reverb on 6 and keep the PS1 on my Mic Stand tray and adjust it from 30 ( heavy overdrive ) to 100 ( just a little overdrive ) and use my guitar volume controls accordingly to play live .
Hi thanks for the video! I have a question, is it possible to use the bugera ps1 with fender hot rode deluxe IV amp?
Just get a volume attenuator like pedal Jhs makes one that goes into your effects loop and that will quiet your amp for you I have something like that for my hot rode deluxe. It should be cheaper than the bugera. I got mine on eBay. If you have equalizer pedal you can do the same also. Bugera should work I would check the speaker if it is 4, 8, or 16.
Here is the JHS Little Black Amp Box Signal Converter - amzn.to/42ZL2Pv
@@OnlineHustleDad Thank you for the answer! Eventually, if I use a Boss Eq pedal as volume pedal, is it the same as if I use the Jhs pedal you mentioned?
Thanks again.
Thanks for the explanation, I do appreciate but...as sjs793 said, it was not really clear what cable you meant going to what jack. You kind of just floundered as if you were thinking about it as your went. To be honest I could not tell what cable goes where from your video. I love that your shared but remember those that do see your video know even less that you do. So you have to be explicitalty clear which cable goes to what jack. At one point you grabbed one cable and said "this cable goes to the 4 ohm jack", then your change the cable you where holding????? Which one? The first or the second? I hope this helps. Plan what you are going to say might help also. Please take no offense....
Thank you for commenting on the video.
Is the Torpedo Captor any way better than this?
I am not sure about the torpedo captor. Price point I went with the Bugera.
Where's the cranked sound? That's the whole point is to be able to crank your amp volume to 10!
Exactly 😂😂😂
take the product out of the box first to make things easier...then, perhaps demonstrate where the input and output jacks on the unit are located. : )
Thank you for giving me some suggestions on improving the video.
I got all my volumes cranked up...I can't hear you.......camera keeps moving around......Ahhhhhh !
Sorry about that. I will try better next time.
Dude you know what light is cause you damn sure need some....
Haha, I might need to invest in some better lighting!
Maybe you should of done some practice runs
Maybe or maybe not.
I have to imagine you're unemployed
Thanks for your comment.
Why?
Confusing
Sorry about the video being confusing for you.
PREPERATION, PREPERATION, MAYBE REHEARSE BEFORE RECORDING
Maybe I won’t
Gosh this sucks.
Thank You for watching and commenting
Unbelievably bad video lol
Thank You for watching and commenting on the video.