Golf using arduino and pi - virtual moving floor

Поділитися
Вставка
  • Опубліковано 2 жов 2024
  • The project indoor golf setup using Arduino and pi or virtual moving floor is a golf floor that is supported by 24 jacks and each jack can move up or down to create a virtually golf floor. The setup consists of Arduino which is connected to ultrasonic sensors and reading values of sensor and sending it to pi for the controlling of the jacks. The pi is controlled by GUI, which allows you can control each jack separately and the real-time distance is shown on it. The electrical jacks are the backbone of the floor which on moving up and down makes a curvy area and a perfect place to play golf.
    This project was for one of my clients and if you need more details message me at facebook : highvoltagestech or comment..
    Amazon and Banggood Purchase links:
    *****************
    Buy anything from amazon
    amzn.to/2SGees7
    Buy arduino UNO R3
    amzn.to/2zmeipW
    Arduino starter kit with book
    amzn.to/3cg8Svt
    Raspberry pi
    amzn.to/2zjiYx2
    Browse arduino products
    amzn.to/2zgCLx9
    Esp8266 boards
    amzn.to/2WGpOo6
    Arduino many in 1 sensor kit
    amzn.to/3ccMvag
    RFID module
    amzn.to/35Ip06r
    Bangood
    UNOR3 Basic Starter Kits
    www.banggood.c...
    Arduino 37 in 1 sensor modules
    www.banggood.c...
    MFRC522 RFID Reader
    www.banggood.c...
    Arduino Mega kit (19 % off)
    www.banggood.c...
    Basic Electronic kit
    www.banggood.c...
    RFID starter kits V2
    www.banggood.c...
    Nodemcu ESP8266
    www.banggood.c...
    DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
    ****************
    For More Projects and Tutorials visit our Website:
    www.highvoltag...
    Follow us on Facebook
    / highvoltagestech
    For business enquires and sponsorships, email me
    highvoltages670@gmail.com
    For Arduino, Raspberry Pi, IoT, and programming projects check my Fiverr profile,
    www.fiverr.com...
    ---------------------------------------------------------------------------
    BUY ELECTRONICS COMPONENTS FROM INDIA'S BEST DIY STORE
    DIY Usthad Official store diyusthad.stor...
    --------------------------------------------------------------------------- Hire me on fiverr: www.fiverr.com... Hire me on Fiverr: www.fiverr.com...
    ~-~~-~~~-~~-~
    Please watch: "How to Set Up Wokwi for IoT Simulation in VS Code with PlatformIO"
    • Simulating IoT project...
    ~-~~-~~~-~~-~

КОМЕНТАРІ • 11

  • @idontwantachannelimjustcom7745
    @idontwantachannelimjustcom7745 5 років тому +1

    What were you planning on covering it with?

    • @HighVoltages
      @HighVoltages  5 років тому

      putting green

    • @idontwantachannelimjustcom7745
      @idontwantachannelimjustcom7745 5 років тому

      @@HighVoltages like the fake grass that people put on porches or....
      Greenscapes 209107 Grass Rug, 4 by 6-Feet www.amazon.com/dp/B00LK2MIFC/ref=cm_sw_r_cp_apa_i_3O05Cb55SA7X0
      Are you going to back it with plywood to prevent people from stepping through?

  • @juanodonnell
    @juanodonnell 3 роки тому +1

    did it work?

    • @HighVoltages
      @HighVoltages  3 роки тому

      It was a prototype so yes prototype was success.

    • @juanodonnell
      @juanodonnell 3 роки тому

      @@HighVoltages Cool. Do you have an idea of (development+pieces) cost? Will you sell on demand?

  • @karatery-8058
    @karatery-8058 3 роки тому

    Nice vid. Will you be able to walk on it

    • @karatery-8058
      @karatery-8058 3 роки тому

      Also Is this going to be finished soon.

    • @HighVoltages
      @HighVoltages  3 роки тому

      sure, but i will not be posting it on youtube. you can email me if you have questions.

  • @leef_me8112
    @leef_me8112 5 років тому +3

    Down-vote for annoying musing

    • @HighVoltages
      @HighVoltages  5 років тому

      thank you for your feedback. I will try to improve that next time.