I have to say that I have the upmost respect for Dougo! A man who has worked hard his entire life to support our country from the bottom, the silent soldier and still makes sure that his appearance, machinery and family are all taken care of! Larson 2024!
Big Swede, 2 Pro tips when using a hole saw. 1. Only use the pilot drill, to drill the pilot hole. Then put the saw on the mandrill, otherwise when the pilot punches through, the saw grabs and the pilot drill brakes. 2. Don’t over lubricant the hole saw. Over lubricating will make the saw not cut. Thus making it burn up faster than using less lube. And yes I am an expert when it comes to hole sawing through steel.
Clean the injectors on the boat in an ultrasonic cleaner, upside down with mineral spirits. Also make sure to get all the air out! Particles clogging the filter in each injector will block the fuel flow. Keep up the good work guys!
They are a great tool and light. I’ve run countless screws with mine. I believe they produce 100 lbs ft of torque, you have to be careful to not run the screws too deep.
I would look at tekton for a 30 and 60 degree angle wrench, very high quality and you can buy them individually up to 2" especially for something like that track tension spring thing. i use them almost daily working on bobcats and they have never let me down, and they are made in USA so thats a plus
If it’s 100LL then it burns cooler. It’s higher octane which means it burns slower and more controlled. That’s why we run it in the planes because they are air cooled! It’s good for storage too!
My great nefew Tommy Gustafson runs the pumper cement truck, he got the truck, because his best friend Tim, was killed snowmobiling in 2021 and he was the driver of the pumper cement truck, he was a great guy!! Rest in Peace Tim Dewitt
Chet, you can get a big wrench sets at harbor freight or northern tool pretty cheap. Your 1 1/4" fill line to the frack tank is only going to give you about 30 gpm.
Glad to see your back miss seeing your videos. Love watching them and sometimes a lot of laughs when getting stuck and fixing machinery for winter hits .WOW Brody & Chris onto of a roof as hot as the metal is make you knees and hands start to burn wow.
With those 2 big toolboxes, I thought you would have the right size wrench for adjusting the sprayer springs. And you may want to use worm-drive hose clamps instead of the zip ties to hold the hose to the 2 x 2. Enjoy all your projects!
Dougo, Stay away from avgas the additives that it has are not good for your outboard. you want VP racing fuel they have several grades & octane levels, you can get it in 30gal drums delivered.. Or look online to see if there’s a Vp race fuel station around your area..
Hydrating for sure with Northern Chill! Just one question, are you losing a lot of work time from Brodie and Big Swede draining the old baldder? Where? OSHA #1202-B19 says you can deduct bathroom breaks from hourly wages due to distance and time taken from the prescribed job site. What ever happened to LF best ever sturdy forever building practices - are you kidding me - 2x2 and zip ties?? No way are you going to remember to turn that off come winter time - I can guarantee it! Been there, done that! Most enjoyable videos ever!
We just put in the same variable speed drive for a well at work, you guys should be happy with it. Just remember to occasionally blow the dust out of the heat sink in it, with dry air.
I recently watched a guy cut out 1 inch bolt holes in 3/4 inch plate with a plasma cutter. in a fraction of time versus a drill bit. I can't imagine running a farm without one.
I was concerned that you might start the water tank on fire. ;) That happened in Eden Prairie when they were building the water tower in the early 1990's. Welders set the insulation on fire. The news channels carried it all over the world.
the airplane fuel raises the octane and might mess up the time it takes the mixture to fully combust (reduces the rpm as the piston is fighting the combustion going back up) it probably helps if you have old fuel in the tank though and put in a little gulp to spike it some , emptying the tak and put in fresh fuel should be better though probably start running better once you flushes the airplane fuel out of the tank and put some premium gas in
Manufactorers state in their instructions: running hours/specs of oil/specs of fuel. If an engine has not run for a while replace fluids for the specs given. If that does not help, clean/repair it.
I surely don’t know farming as well as you do and appreciate learning from you guys. I work in the heavy building materials industry as a cement/aggregate sales rep. So you know: cement is the active ingredient in concrete, concrete is the slurry mixture of cement, water, and aggregates, so you’re really getting concrete delivered for your grain bins, not cement. Hope this little bit of education helps!
17:00 my house pex pipe can't be in the sun or it deteriorates - I don't know exactly what you have, but you. might need some covering on the pipe above the ground.
Thanks for another great video Chet and Eric and Brody. It was interesting and enjoyable to watch. I like Brody’s comment to Chet about setting a timer on his phone to shut off the water. I do that all the time. I just call up the phone verbally and tell it to set timer for whatever. Works super for not forgetting something like water flooding. Good one Brody for Chet. The way you set up the water tank is just fine in my eyes. It all works fine. Love your bin builders. That is some base of concrete they built-;wow and wow!!!!!!!! That will be quite the bin. Busy with machinery right now I see. Some being put away for storage snd tractors going back off lease and getting equipment ready for harvest. Good to see uncle Randy. Need some more of him and grandpa and grandma. They all are super people. Dougo I feel bad for you. Everyone around the nation has advice for you on your boat motor. Ask the dealership were you got it from and go from there. End up story!!!!!!!!! Sounds like your new well is doing good. Good job done. Thanks for everything gentlemen. The Iowa farm boy. Steve.
Do you clean all the algae and or barnacles off the bottom? That could affect top speed. On my fishing boats a dirty bottom could cause up to 10% more fuel use.
Randy should be on there more often, I'm sure him and Doug would be hilarious.
I have to say that I have the upmost respect for Dougo! A man who has worked hard his entire life to support our country from the bottom, the silent soldier and still makes sure that his appearance, machinery and family are all taken care of! Larson 2024!
Awesome video guys. It's amazing how far Chet has came on his videos. He's actually doing better than most TV stations. 🚜🚜🚜
Big Swede, 2 Pro tips when using a hole saw. 1. Only use the pilot drill, to drill the pilot hole. Then put the saw on the mandrill, otherwise when the pilot punches through, the saw grabs and the pilot drill brakes. 2. Don’t over lubricant the hole saw. Over lubricating will make the saw not cut. Thus making it burn up faster than using less lube.
And yes I am an expert when it comes to hole sawing through steel.
These videos get better with time. You've progressed very well. God Bless from Canada
I’m just here to see what all the internet experts tell Larson’s what they should be doing.
Me too, so I know the “correct” way to do things.
😂
We are all paying the government substitutes they receive so we are all part owners of their farm.
)0😊soq😊@@Er.dr.73
My only suggestion is maybe zip tie around the quick coupler as I’ve had them pop open before.
Just be glad your pontoon boat is so small. My pontoon boat is 47ft 35 tons
Dougo hotrod'n out on the lake while the boys are working hard!
That footing is massive. Good to see the water supply is working out - trust it will meet the needs.
We have been waiting for weeks to see the Concrete Footing for the new grain bin get poured. Great to see.
Fantastic video guys. Great job. thank you
Thanks for another great video and is so enjoyable to watch.
Love these visits to Larson Farms
Another awesome video you guys. 👍❤️
Nice flow from that well!
Always a pleasure. Thanks for sharing. Be Safe. Stay well. Victor ( Arkansas )
Big Swede slips off that roof onto that stick and he'll be Big Swede on a Stick. Ole'
Just in time for the Great Minnesota Get Together.
The concrete gods love you guys
Chet, put a bucket over the white with the shutoff to keep the water out of the pipe. Never know if the freezing will break something
was going to say the same.
Clean the injectors on the boat in an ultrasonic cleaner, upside down with mineral spirits. Also make sure to get all the air out! Particles clogging the filter in each injector will block the fuel flow. Keep up the good work guys!
I have that M12 impact driver since last summer - it's perfect! FYI I'm using Milwaukee devices here in Europe, Poland because of your channel :)
They are a great tool and light. I’ve run countless screws with mine. I believe they produce 100 lbs ft of torque, you have to be careful to not run the screws too deep.
Can’t wait for the new intro.😊
I would look at tekton for a 30 and 60 degree angle wrench, very high quality and you can buy them individually up to 2" especially for something like that track tension spring thing. i use them almost daily working on bobcats and they have never let me down, and they are made in USA so thats a plus
If it’s 100LL then it burns cooler. It’s higher octane which means it burns slower and more controlled. That’s why we run it in the planes because they are air cooled! It’s good for storage too!
Foundation is the word you're looking for. They pour the footings first and then the foundation. Looks good 👌
Absolutely a great video. I like seeing the concrete set up.
Enjoyed the video and thanks for sharing your thoughts with us all
Idea Put a cap on the value tube to keep dirt and debris out of it
Great video and looking forward to the next one!! 🚜
My great nefew Tommy Gustafson runs the pumper cement truck, he got the truck, because his best friend Tim, was killed snowmobiling in 2021 and he was the driver of the pumper cement truck, he was a great guy!! Rest in Peace Tim Dewitt
I’m just here because I love the video’s like always great job
Chet, you can get a big wrench sets at harbor freight or northern tool pretty cheap. Your 1 1/4" fill line to the frack tank is only going to give you about 30 gpm.
Great video.. Progress Forward is awesome.
That tank metal is extremely tough. I don’t know the specs but it is hard steel.
the wash job looks good on the tractor
Glad to see your back miss seeing your videos. Love watching them and sometimes a lot of laughs when getting stuck and fixing machinery for winter hits .WOW Brody & Chris onto of a roof as hot as the metal is make you knees and hands start to burn wow.
Just posted one Sunday.and at least 3 a week all summer.
@@lynwessel2471 thanks have to go back and watch them
@@lynwessel2471Seriously, he's one of the most steady farm tube posters
Doug the o2 sensor in your outboard has gone bad. Thats a common problem with those Suzuki 350s.
O2 sensers don't like lead from the Avgas.
thank you
With those 2 big toolboxes, I thought you would have the right size wrench for adjusting the sprayer springs. And you may want to use worm-drive hose clamps instead of the zip ties to hold the hose to the 2 x 2. Enjoy all your projects!
Thanks 👍
Curbstop. If you have hard water keep it exercised often.
We used affordable pumping for a lot of our concrete pours
New well appears to be just what you needed. Merlin needs some‘Keep Off My Grass” signs.
Dougo we’ve run aviation gas in a lot of recreational vehicles we’ve had carbonated and fuel injected and we’ve never had a problem with any of them.
Love the video!! Tell Dougo to trim the motor up some while at wot.. it’ll pick up some mph’s lol. That bin is being built to last!!
Dougo my buddy got av is his 2023 yz 250 4 stroke fuel injection. Av gas is the best gas you can run in them things
Magnifique vidéo et les tracteur à chenille et matériel agricole sont bien équipés 😂😅😮
Looks spensive!
Chet, Brodie is being serious, set a timer. 😂
Was just wondering what soap you use when you clean your equipment
So Wynee my knees are burning 🤣🤣
Those Hudson floats are the best!! Put a manifold on for 2 floats. Double your pleasure. Lol
Sure Hope you guys turned the water off in time? Bin base looks good.
That pouring that concrete is a huge expense. I hope it pays off and I’m sure it will in the long run. Great video guys.
Love the channel and videos. I'm in Pennsylvania and we don't have near the equipment problems.
Nice well!
Great job on keeping busy during crop growing season, I guess harvesting is coming in the middle or late September.
As late as the crop is more like mid October.
Dougo, Stay away from avgas the additives that it has are not good for your outboard. you want VP racing fuel they have several grades & octane levels, you can get it in 30gal drums delivered.. Or look online to see if there’s a Vp race fuel station around your area..
A certain Millennial Farmer lives about 30 or 40 miles away, he would know exactly where to get go fast fuel.
Chet Eric Broodie and Dougo that was great thank you water tank and sprayer.
Hydrating for sure with Northern Chill! Just one question, are you losing a lot of work time from Brodie and Big Swede draining the old baldder? Where? OSHA #1202-B19 says you can deduct bathroom breaks from hourly wages due to distance and time taken from the prescribed job site. What ever happened to LF best ever sturdy forever building practices - are you kidding me - 2x2 and zip ties?? No way are you going to remember to turn that off come winter time - I can guarantee it! Been there, done that! Most enjoyable videos ever!
Fluid filled gauges are usually glycerin inside. . Look like the Pressure diaphragm has left the Chat. 😂 12:51
Dougo out playing with his boat while you guys are working that's just funny but he does deserve it
We just put in the same variable speed drive for a well at work, you guys should be happy with it. Just remember to occasionally blow the dust out of the heat sink in it, with dry air.
I recently watched a guy cut out 1 inch bolt holes in 3/4 inch plate with a plasma cutter. in a fraction of time versus a drill bit. I can't imagine running a farm without one.
Here in TX they would have laid 1/2" rebar on the ground and poured on top of it.
Then a Old Milwaukee finish !
Jet fuel is diesel fuel..... maybe they meant AVgas? to add confusion, AVgas can be regular unleaded (but there's also a high octane available)
you need a mag drill with cutter bits
Yea dog, we got flow
I was concerned that you might start the water tank on fire. ;)
That happened in Eden Prairie when they were building the water tower in the early 1990's. Welders set the insulation on fire. The news channels carried it all over the world.
Have you proper recalibrated? That’s what I used to do to my boat to make it go faster. I’d send the prop to a prop shop.
How big is your new grain bin? How many bushels of grain will it hold?
the airplane fuel raises the octane and might mess up the time it takes the mixture to fully combust (reduces the rpm as the piston is fighting the combustion going back up)
it probably helps if you have old fuel in the tank though and put in a little gulp to spike it some , emptying the tak and put in fresh fuel should be better though
probably start running better once you flushes the airplane fuel out of the tank and put some premium gas in
Did Chet just coin the term "Sprayler, Sprailer" for a spray trailer???? 🤷♂️🤘🤘
Cole should have used the guys you all use for the bin site
Love it
I thought I watched all your videos I don't remember that big blue tank where did that come from
Manufactorers state in their instructions: running hours/specs of oil/specs of fuel.
If an engine has not run for a while replace fluids for the specs given. If that does not help, clean/repair it.
I surely don’t know farming as well as you do and appreciate learning from you guys. I work in the heavy building materials industry as a cement/aggregate sales rep. So you know: cement is the active ingredient in concrete, concrete is the slurry mixture of cement, water, and aggregates, so you’re really getting concrete delivered for your grain bins, not cement. Hope this little bit of education helps!
The local dairy guy to me just out up (3) 24x132, and each silo footer was 90 yds.
You must be referring to the 10th generation farmer 😊
Good stuff guys. Looks good.BUT….only kidding
You can always torch cut a hole and weld a bong to it
Bung not bong
@@jackcrawford6222 lol
Think 🤔 of something that you can hook up to the tank for fire fighting. Gas pump, fire hose and whatever else you need.
Does Randy also work exclusively at the farm?
Yes Randy, Doug and Merlin are partners. Chet is working his way into the ownership
I’m just here for all the comments on how much better your bin pads are compared to Cole the cornstars
Hay Doug have you checked your prop?. If the hub is bad and or the pitch of the blades are off it will lose power.
I’m sure if you left the water running Merlin will let you know.
Dougo, is the new propellor the same pitch as the old one on the boat?
17:00 my house pex pipe can't be in the sun or it deteriorates - I don't know exactly what you have, but you. might need some covering on the pipe above the ground.
Well,😂 I think I know where the extra few mph went to on that boat
Thanks for another great video Chet and Eric and Brody.
It was interesting and enjoyable to watch.
I like Brody’s comment to Chet about setting a timer on his phone to shut off the water. I do that all the time. I just call up the phone verbally and tell it to set timer for whatever. Works super for not forgetting something like water flooding.
Good one Brody for Chet.
The way you set up the water tank is just fine in my eyes. It all works fine.
Love your bin builders. That is some base of concrete they built-;wow and wow!!!!!!!! That will be quite the bin.
Busy with machinery right now I see. Some being put away for storage snd tractors going back off lease and getting equipment ready for harvest.
Good to see uncle Randy. Need some more of him and grandpa and grandma. They all are super people.
Dougo I feel bad for you. Everyone around the nation has advice for you on your boat motor.
Ask the dealership were you got it from and go from there. End up story!!!!!!!!!
Sounds like your new well is doing good. Good job done.
Thanks for everything gentlemen.
The Iowa farm boy. Steve.
Today's Show:
The Three Stodges, A Plumbing We Will Go!!!
More Randy and Rylan on the channel please.
It isn't those concrete guys first rodeo !
Do you clean all the algae and or barnacles off the bottom? That could affect top speed. On my fishing boats a dirty bottom could cause up to 10% more fuel use.
Thats a Wood bit boys
Please tell me where you got that cat trap from, here in Barbados 🇧🇧 and need one of those.
Do you guys own any tractors or combines besides the quadtracks and why don't you own them?
Do a tool box tour
16:42 LOL’d “action!” The comment section responds!
6:05 used pure gas lane, no ethanol