thank you bro. my washing machine was making an unusual noise during dry cycles and i checked the motor belt it was too loose. i tightened it like in the video and now its like new.
Awesome! Did this and fixed my machine. Now I'm hunting for a replacement belt in Shopee or Lazada so when the belt loosens againd due to wear I can replace it.
Question.. i replace theold belt of my washing machine, new belt was to tight, washing machine not working. Any tips to somewhat loosen the new belt. Thanks in advance
Hi... can you explain on the coupling. My machine did not spin in high speed. I did tighten the belt due to abit loose but no effect. Than i check the coupling but find it ok after turning the coupling due to faced locking feeling. After freeing it, run the machine and find the spinning is now at high speed. FYI
There are washing machines with no belt. These are called Direct Drive System on which the motor shaft is directly attached to the spinner assembly. It is commonly used in front load washing machines but there’s just a few in top load washing machine models.
how do you adjust the motorbelt of a washing machine for the other brand like Eureka when the motorbelt is hardly accessible unlike the kinemaster brand you have demonstrated?
Sir yung saken bago palit yung gear box isa gamitan lang nasira ulit ang gear box.kinalas ko ulit may napansin ako sa puly nya oblong ang ikot nya dun kaya posible na sita sa puly nya?
Bkit po ung washing ko umiikot f nd nkakabit ang belt mabilis ang ikot f my belt na humihinto ang ikot.. Sira n po ba ang motor ng washing machine ko. Ang brand po nia ay sanyo n 8.7 kls po
Tiga saan ba tong content creator nato pwede ba tagalog nalang para dika nahihirapan magpaliwanag at di rin ako nahihirpan umintindi hahah mahina kc ako sa english..
Nag palit ako ng motor yung na bigay ng store 12mm yung old motor 10mm po ginagawa ko nag palit ako ng assembly pulley na 12mm po umander n ang problma yung belt d po mgkasya sa kabitan eureka brand single tab pde po e adjust yun or ppalitan ng belt? Ty po
Try nyo po i adjust kung pwede pero pg d magkasya maigi po palit belt n lng po. Sukatin nyo po maigi.( dapat katamtaman lng ung tensyon o higpit ng belt)
Ang importante po katamtaman ang luwag at higpit ng belt. ( di po nkakapekto ng performance kahit anong sukat ng belt na gamit) yun po ang silbi ng adjuster .
Hello sir napalitan k n ng belt ok n po ang tanung ko need po b e adjust ang torque ng motor yung ikot nya pag forward ok ang ikot ng labahan pag reverse medyo mabagal ang ikot at maugong po pero nkka laba n po anu po ggwin ko ty
Bakit masama po ba pag ganyan english? Toxic mo sir. Importante nakakatulong di tulad mo kupal 🤣... new sub here tuloy mo lang po mga gnyang video para makatulong sa mga tinataga ng mga technician
sir paano po yung washing ko ayaw po mag drain. kapag hinihili ko lang yung cable tsaka lang po bumababa yung tubig. ano po kaya possible na sira nun sir.? tnx po sa reply 😊 general electric po yung tatak washing ko automatic.
Sir, check nyo po kung putol ung dulo ng drain motor cable, (meron spare cable na nabibili), kpag hindi umiikot ung drain motor pg nka set sa drain( kelangan na replacement ng drain motor). Dalhin nyo po sample nyo sa electronics supply store pra parehas.
How to repair washing machine water drain motor
ua-cam.com/video/9Damv5MGfnE/v-deo.html
thank you bro. my washing machine was making an unusual noise during dry cycles and i checked the motor belt it was too loose. i tightened it like in the video and now its like new.
Thank-you sir so so so much. I would have had to go hunting for belts and did not know i could adjust the belt. Thank you once again.
Mine is a Panasonic, couldn't find a space to insert the screw driver 😥
Yeah, it was helpful and highly entertaining! Kudos on your courage to speak english that foreigners understand.
Thank you sooooo much. Literally saved me from buying a new machine. Lol...
ps. My washer was Seiki brand
10/10
Awesome! Did this and fixed my machine. Now I'm hunting for a replacement belt in Shopee or Lazada so when the belt loosens againd due to wear I can replace it.
Question.. i replace theold belt of my washing machine, new belt was to tight, washing machine not working. Any tips to somewhat loosen the new belt. Thanks in advance
Thanks bro sa tip nagawa ko ung sira ng washing machine belt din ang cause..salamat sa video mo na share ko na din sa fb ko
Thank u for this vid sir. i can try to fix my own washing machine☺️
It is very helpful. Thank you for your good mind.
Akilesh TV like this video... Super... Amazing...
Jay .. thanks for this videos.
You really save my day ...
Thank you..i can now adjust the belt motor..
thank you so much 👍💪💪💪 very helpfull your vlogging
Thank for your kind instruction.
Thank you sir,,for sharing with us your knowledge,,
this is so easy to do, like that one lods.
thanks for the share of information.
Thanks for the video. easy to understand.
Hi... can you explain on the coupling. My machine did not spin in high speed. I did tighten the belt due to abit loose but no effect. Than i check the coupling but find it ok after turning the coupling due to faced locking feeling. After freeing it, run the machine and find the spinning is now at high speed. FYI
Thank you bro.
Very nice informative video Boss 🙏
Thanks bro 👍👍 its really work
Had same issue, fixed it. Thanks
Nice vedio master
Very helpful 👍🏾
Pre pwd magtagalog kpag hundi muna kaya, wag mo pilitin bka pumutok ung fuse mo😂😂😂😂😂
atleast sinusubukan nya magenglish d tulad mo na kupal ang ugali. Toxic ng pagkatao mo unggoy
mga katulad mong polpol dahilan bakit toxic ang mundo. Hayaan mo siya mag english, wag kang inggetero. Di ka lang nakakaintindi kaya ka mapanlait.
thanks❤
Sir ,all washing machine have a BELT? thanks
There are washing machines with no belt. These are called Direct Drive System on which the motor shaft is directly attached to the spinner assembly. It is commonly used in front load washing machines but there’s just a few in top load washing machine models.
thanks for sharing.
Hello good days my washing belt is 21.5 i change to 21 it is ok or need to adjust?
Thank you very much
Well done
Is it possible? I will try.
Thank you so much Sir..
Bro just save myself from buying a new washing machine.
Samsung top-load. this fix my problem. mine has 4 10 mm bolts
Thank you sir
Love you gloves
Thanks
Magtalog ka nalang master hehe
Thanks sir, new subs po.
Tks Brother 😄😄
Can the belt be tightened on a sharp ES-W510?
Most washing machine with BELT motor drive are adjustable except with the DIRECT DRIVE SYSTEM ( dds).
@@JayNetworks thanks. That makes sense!
Brad Tagalog nlng dumudugo ilong ko syo, ska mas maraming pilipino pa makakaintindi just saying lng😊
❤
how do you adjust the motorbelt of a washing machine for the other brand like Eureka when the motorbelt is hardly accessible unlike the kinemaster brand you have demonstrated?
Eureka washing machine has an underneath cover at the bottom. Unscrew the bolts to remove the cover, then do the procedure same like in the video.
Sir ano pong tawag dyan sa bakal na parang U po sa ilalim ng circle na may belt?
Drive pulley guard po ang tawag.
Super
Boss anong socket # ng turnilyo po? Ty
Sir yung saken bago palit yung gear box isa gamitan lang nasira ulit ang gear box.kinalas ko ulit may napansin ako sa puly nya oblong ang ikot nya dun kaya posible na sita sa puly nya?
Opo dapat po nakasentro ang ikot ng pulley at cguradurin po na nakalapat maigi ung setting ng gear box.
Sir yong belt ng washing KO 18.5 pwede na po ba 18.6 iaadjust nlang po
Pwede po, wag lng po 19 kc maluwag n masyado.
What is size of nut in pully?
Size 13 mm socket / ratchet wrench
@@JayNetworks sorry I am talking about the small nut in pully of the motor
Nut head size is 13mm
wag kana màg english para kuya..para ndi kà nawawala sa pag explain 😅✌️👍😍
Bkit po ung washing ko umiikot f nd nkakabit ang belt mabilis ang ikot f my belt na humihinto ang ikot.. Sira n po ba ang motor ng washing machine ko. Ang brand po nia ay sanyo n 8.7 kls po
Check nyo po muna ung capacitor, bka un ang problema. ua-cam.com/video/-OBQEfsCtNM/v-deo.html
Tiga saan ba tong content creator nato pwede ba tagalog nalang para dika nahihirapan magpaliwanag at di rin ako nahihirpan umintindi hahah mahina kc ako sa english..
Tagalogin mo pra mas maitindihan Ng marami
Nag palit ako ng motor yung na bigay ng store 12mm yung old motor 10mm po ginagawa ko nag palit ako ng assembly pulley na 12mm po umander n ang problma yung belt d po mgkasya sa kabitan eureka brand single tab pde po e adjust yun or ppalitan ng belt? Ty po
Try nyo po i adjust kung pwede pero pg d magkasya maigi po palit belt n lng po. Sukatin nyo po maigi.( dapat katamtaman lng ung tensyon o higpit ng belt)
Yung belt nya po a32 pde po b palitan ng a33 ?
Ang importante po katamtaman ang luwag at higpit ng belt. ( di po nkakapekto ng performance kahit anong sukat ng belt na gamit) yun po ang silbi ng adjuster .
Ok po thanks po
Hello sir napalitan k n ng belt ok n po ang tanung ko need po b e adjust ang torque ng motor yung ikot nya pag forward ok ang ikot ng labahan pag reverse medyo mabagal ang ikot at maugong po pero nkka laba n po anu po ggwin ko ty
Tagalugin muna lang boss
Lods lahat ba ng washing ganyan yung sa baba
Sir meron din Ung direct drive motor, wala ng motor belt.
@@JayNetworks pano ayosin lods kapag drive motor ayaw din kasi umikot
Sir, pag start at umuugung lng ayaw umikot, ung starting capacitor po ang depekto.
Sir check nyo po ito kung paano mg check ng capacitor: ua-cam.com/video/mweWSaDf30U/v-deo.html
@@JayNetworks bibili ba uli ng bagong capacitor pag may depekto lods?
bisayain mo nalang bai
Please my top load washing machine doesn't wash properly, the drum doesn't spin during wash cycle. I've adjusted the motor belt but still not washing
If u hear only a humming noise from the motor but not spin, there must be a problem with the motor capacitor.
@@JayNetworkswhat if the capacitor is fine as well? What could be the problem?
To toolss
Dapat nagtagalog kna lng hahaha
Thanks po
Sana nag tagalog ka nalang lodi
Bakit masama po ba pag ganyan english? Toxic mo sir. Importante nakakatulong di tulad mo kupal 🤣... new sub here tuloy mo lang po mga gnyang video para makatulong sa mga tinataga ng mga technician
Bakit kasi hindi ka na lang magtagalog
sir paano po yung washing ko ayaw po mag drain. kapag hinihili ko lang yung cable tsaka lang po bumababa yung tubig. ano po kaya possible na sira nun sir.? tnx po sa reply 😊
general electric po yung tatak washing ko automatic.
Sir, check nyo po kung putol ung dulo ng drain motor cable, (meron spare cable na nabibili), kpag hindi umiikot ung drain motor pg nka set sa drain( kelangan na replacement ng drain motor). Dalhin nyo po sample nyo sa electronics supply store pra parehas.
kelangan pa hilahin yung cable sir para lang bumaba yung tubig tingin ko po dnaman po putol yung cable sir.
magkano po kaya ang pyesa king replacement ng drain motor sir?
Palitan nyo po drain motor. Check nyo po ito kung paano. ua-cam.com/video/9Damv5MGfnE/v-deo.html
salamat po sir 😊
Tagalogin Mona kc
Tagalog ka para mas maintindihan ng karamihan
Thanks
wag kana màg english para kuya..para ndi kà nawawala sa pag explain 😅✌️👍😍