Ever wonder why some comments are higher up the list than others? One BIG factor is how often you click the "like" button for that persons videos. So, take a split second out of your very busy day and mash that button! It shows you really appreciate the time, money and effort that we put into making videos like this :)
I did a similar setup with led strips I bought. I made two light panels to reduce shadows and powered them with a converted atx power supply. Most led strips are 12 volts. Those led strips are fun for making lighting projects and are surprisingly cheap!
For us guys just starting out on UA-cam, videos like this save us tons of time and we absolutely appreciate your advice and experience. Well speaking for myself, I do. Thanks.
This is a perfect idea for a light table for hand drawn animation, architectural drawing, or even looking at x-rays if you want. Awesome build, thanks for showing us.
The days we went to school and Shop class building that techno dancing light, here we are again doing the same thing all over again 40 years later, for me. Great job. enjoyed the how to straight forward and simple to follow thank you for bringing back high school memories.
For folks wanting to try this, here's what I've learned when monkeying around with these LED light strips over the past year: - They come in all sorts of colors - even changing colors. Knock yourself out. - These are sold in 5-meter strips for around $7-15 USD, depending on which particular kind you want. Lots of varieties. Some are even water proof. - Regardless of the brand, I've never got the adhesive to work well., I just use hot glue every few inches as needed. - You can cut the strips into lengths of your choice, but the smallest increment is 3" or so. - If you want eye-pleasing white, do NOT get "cool white" (sometimes called "bright white"). It's got a garish blue tint to it that will grate on your nerves after a while. Get "warm white". It's closer to incandescent light, and feels more natural. - Last time I bought some, 5050 was not the brightest. I think it was 3528. But those numbers refer to the size of the LED module on each strip, and are not always a direct correlation to the lumens. - They require 12v. If you use more, you will burn them out. If you use less, you won't like it. - They require 1amp for every 5' or so. If you plan on lighting up the entire 15 foot strip, plan on a 5amp power supply. (Laptop chargers work well for this, but make sure it's a 12v charger. Universal laptop chargers from eBay work well, and they're ~10USD) - If you want to dim them, don't bother trying to reduce the voltage. you won't like the results. Instead, use a special dimmer switch that is made for it. They're about $1. You'll even find some on eBay included as a kit. Some kits even have wireless remotes. VERY CHEAP - Instead of painting the background white, you can glue down tin foil and then glue the LED strips on top of it. Watch the solder so you won't short it out. Have fun!
Build article with more detail: www.ibuildit.ca/other%20projects/led-light-panel.html The camera gantry build article: www.ibuildit.ca/other%20projects/camera-gantry-1.html Ways YOU can help support the work I do in making these videos: Plans for sale: www.ibuildit.ca/plans.html Making these videos is expensive and time consuming, and you can help by becoming a supporter of this channel on Patreon. For as little as $1 per month, you'll get early access to regular videos and also exclusive videos made just for my Patreon supporters! www.patreon.com/user?u=865843&ty=h Did you know I have two other UA-cam channels? My second channel: ua-cam.com/channels/zGbp-rRVNwyFhn9gHoZr5g.html My home reno channel: ua-cam.com/channels/MlfKvFrEpzg1PEpTzJDWoA.html
Not to make "light" of your light weight light panel, but I do believe it sheds the light on the subject lightly. A nice, light touch for your filming and light needs. It's no "light weight" by any means regarding the light it produces. You might think I'm making "light" of your project, but I am not by any means. It should serve your light needs for many episodes to come. :)
John, I like that you don't get into the 'how to build minutia' with these. Most of us subscribed to your channel have a basic understanding of woodworking. Your concepts & designs are what shine through, and they are great!
A few years ago I brought LED shop lights from the big box store $$$ in a hurry to get proper light in my shop. I just added two more of these to complete two rows of lights. I did that just to keep what I had already done uniform. I going to build some of these as a shop/overhead light on the other side of my shop and a camera light as well. Great idea and a fraction of the price!
That is neat. Educational, informative and easy on the eyes. As always, a pleasure to view your hard work and effort that you put into producing a quality video for our viewing pleasure. Thank you Sir.
You are some sort of fantastical genius. I absolutely love your setup. I wont be making this light any time soon but I will be watching your video again and again
That's too funny! I built a very similar a few months back, but the light was not bright enough and I noticed flickering when I played back the video. Nice one, John!
Cool trick for cutting the strips vs trying to cut with scissors. I've also found the sticky only lasts long enough to hold while the silicone glue I add is drying. Def back up with some glue or fasteners.
that's a cool project, it turned out great, I'd love to try this myself! I've done a couple of very similar projects but smaller, I found that I gained a lot of light using aluminium foil glued as a backing.
Nice. All you need now is a monitor and perhaps a teleprompter to attach to your gantry. Okay perhaps you don't need it but it'd make it way cool looking.
Have been wanting to do something like this for a while now.....Will need to step down the voltage for the batteries I would like to try and use. Thanks John!
....and John said, “Light,” and there was light. John saw that the light was good, and he separated the light from the darkness by building a project with LEDs...and it was good
I have LED stripes with the self-adhesive backs that I put under my kitchen cabinets. If you light the LEDs before you stick them on a surface the glue heats up a bit allowing them to stick better. (knocking on wood) I haven't had any issues with the strips not sticking.
Hot glue works to attach LEDs, its fast and simple. They all suck at sticking. Thanks for the build, going to make a few of these for my kitchen ceiling.
Quite a while ago I was involved in building some similar light (at least for the purpose), and the major difference we he was putting on top of the LEDs (before the diffusor layer) a thin sheet of shiny polished aluminum (where there were cutouts for the LEDs). This way it was noticeable brighter and also had a slightly improved CRI.
You are awesome sir, I sub ur channel since the day I saw your video "Can paper cut the Wood" it was amazing experience. You are hard working man, and you deserve success. May God bless you and all Hard working men & women.
I’ve made several of these for free. I find a flat screen TV with a cracked screen in the trash, remove the cracked screen and it’s long narrow board, remote IR sensor board, speakers, and leave pretty much everything else and viola! Although the LED strips,CCFLs or whatever you find in a flat screen TV might not be the kind you want(warm white, cool, etc)…. They make for great light tables Atleast.
if you want better soldering you can try hot soldering instead of cold soldering. With hot soldering you make the wire touch the smd strip and heat them both up until the tine melts onto it, instead of heating up the tin and putting it between the two.
also i think the reason the strips come loose is from the heat, LED's do not get as warm as other light sources but all the heat is generated at a very tiny spot at the base and it has nowhere else to go.
I want to give you a quick tip. I've been soldering up a 5m piece of RGB LED-strip and I found out that with the many soldered connections that I made, that there was only 9v left at the last piece, compared to the 12v at the beginning. This resulted in more dim LED's at the end of the strip. My tip is to have connect the 12V lead that is coming from the supply, to somewhere halfway too, to counter this voltage drop (due to resistance that are now made with the solder and cables. Edit: well, since you've closed it all up, I guess it's a tip for the next time ;)
How are you finding the heat management? Most of the 5050 LEDs I've tried get very hot, especially running from an SLA battery which tends to put out closer to 13v. If you run them at around 11.5v they run a lot cooler, and will have a much longer working life.
Very soft but bright. Nice work (but not in your special electronics basement room - haha)! That gantry is looking more like a movie set gantry. Just put a seat on it and a little hydraulics and you will be all set to film Mr. Focus! Lights, camera, action. Ok ok no action from him.
Are all LEDS wired in parallel? What voltage battery did you use. Could you have used a small DC power supply and eliminate recharging the battery? Nice job
How long would that last? Planning to use LED as my ceiling light. there is 3 meters distance from floor to ceiling. Like cover the whole ceiling with this
Morning John what a awesome idea. It’s been 4 yrs I hope your able to answer my? 1. How is it as of today 2. What led strip did you buy 3000k 4000k etc and where did you buy them. A item number or? Would be helpful. Thanks
Ever wonder why some comments are higher up the list than others? One BIG factor is how often you click the "like" button for that persons videos.
So, take a split second out of your very busy day and mash that button! It shows you really appreciate the time, money and effort that we put into making videos like this :)
Done and I also Tweet you videos. So hoping even more people mash that button.
Button mashed.
I did a similar setup with led strips I bought. I made two light panels to reduce shadows and powered them with a converted atx power supply. Most led strips are 12 volts. Those led strips are fun for making lighting projects and are surprisingly cheap!
Awh man. You're so cool. Love your vids.
Awh man. You're so cool. Love your vids.
For us guys just starting out on UA-cam, videos like this save us tons of time and we absolutely appreciate your advice and experience. Well speaking for myself, I do. Thanks.
This is a perfect idea for a light table for hand drawn animation, architectural drawing, or even looking at x-rays if you want. Awesome build, thanks for showing us.
I have been wanting to make a light like this. Thanks John
Nice to see your version :)
It is a matter of time you two get together and come up with something neat.....
The days we went to school and Shop class building that techno dancing light, here we are again doing the same thing all over again 40 years later, for me. Great job. enjoyed the how to straight forward and simple to follow thank you for bringing back high school memories.
You have many talents John, always a joy to watch your videos!
For folks wanting to try this, here's what I've learned when monkeying around with these LED light strips over the past year:
- They come in all sorts of colors - even changing colors. Knock yourself out.
- These are sold in 5-meter strips for around $7-15 USD, depending on which particular kind you want. Lots of varieties. Some are even water proof.
- Regardless of the brand, I've never got the adhesive to work well., I just use hot glue every few inches as needed.
- You can cut the strips into lengths of your choice, but the smallest increment is 3" or so.
- If you want eye-pleasing white, do NOT get "cool white" (sometimes called "bright white"). It's got a garish blue tint to it that will grate on your nerves after a while. Get "warm white". It's closer to incandescent light, and feels more natural.
- Last time I bought some, 5050 was not the brightest. I think it was 3528. But those numbers refer to the size of the LED module on each strip, and are not always a direct correlation to the lumens.
- They require 12v. If you use more, you will burn them out. If you use less, you won't like it.
- They require 1amp for every 5' or so. If you plan on lighting up the entire 15 foot strip, plan on a 5amp power supply. (Laptop chargers work well for this, but make sure it's a 12v charger. Universal laptop chargers from eBay work well, and they're ~10USD)
- If you want to dim them, don't bother trying to reduce the voltage. you won't like the results. Instead, use a special dimmer switch that is made for it. They're about $1. You'll even find some on eBay included as a kit. Some kits even have wireless remotes. VERY CHEAP
- Instead of painting the background white, you can glue down tin foil and then glue the LED strips on top of it. Watch the solder so you won't short it out.
Have fun!
I love it that You make everything of wood or plywood except the battery and leds ;). Greetings from Tenerife island
Build article with more detail:
www.ibuildit.ca/other%20projects/led-light-panel.html
The camera gantry build article:
www.ibuildit.ca/other%20projects/camera-gantry-1.html
Ways YOU can help support the work I do in making these videos:
Plans for sale: www.ibuildit.ca/plans.html
Making these videos is expensive and time consuming, and you can help by becoming a supporter of this channel on Patreon. For as little as $1 per month, you'll get early access to regular videos and also exclusive videos made just for my Patreon supporters!
www.patreon.com/user?u=865843&ty=h
Did you know I have two other UA-cam channels?
My second channel:
ua-cam.com/channels/zGbp-rRVNwyFhn9gHoZr5g.html
My home reno channel:
ua-cam.com/channels/MlfKvFrEpzg1PEpTzJDWoA.html
Am I the only one that finds this so calming and fun to watch
Every thing about this is very neat. I really like how you can leave the battery in place while charging it.
Not to make "light" of your light weight light panel, but I do believe it sheds the light on the subject lightly. A nice, light touch for your filming and light needs. It's no "light weight" by any means regarding the light it produces. You might think I'm making "light" of your project, but I am not by any means. It should serve your light needs for many episodes to come. :)
Thanks, you are all light :D
I'm glad you're so lighthearted
Light on!!
John, I like that you don't get into the 'how to build minutia' with these. Most of us subscribed to your channel have a basic understanding of woodworking. Your concepts & designs are what shine through, and they are great!
A few years ago I brought LED shop lights from the big box store $$$ in a hurry to get proper light in my shop. I just added two more of these to complete two rows of lights. I did that just to keep what I had already done uniform. I going to build some of these as a shop/overhead light on the other side of my shop and a camera light as well. Great idea and a fraction of the price!
Great idea, almost bought a video led set a few weeks back for a small fortune your idea is much better
wow that was really brighter than I thought it would be. very cool
That is neat. Educational, informative and easy on the eyes. As always, a pleasure to view your hard work and effort that you put into producing a quality video for our viewing pleasure. Thank you Sir.
You are some sort of fantastical genius. I absolutely love your setup. I wont be making this light any time soon but I will be watching your video again and again
I love these videos. Serious skills, great ideas, creativity and humour. Wonderful.
God I'm so envious of that gantry
That's too funny! I built a very similar a few months back, but the light was not bright enough and I noticed flickering when I played back the video. Nice one, John!
Cool trick for cutting the strips vs trying to cut with scissors. I've also found the sticky only lasts long enough to hold while the silicone glue I add is drying. Def back up with some glue or fasteners.
Very gool John. Love the set up. That is thinking and very intuitive.
Super cool. I would have never thought of something like this.
Excellent thanks. I think I will have a go at making a few of these for filming. brilliant
Great job John, really like the idea.
Vintage 2x4!
I will definitely be using that. It's all perspective: I used to just be considered cheap, but now I'm a "maker!"
Nah, true "makers" can only do it with a CNC, a 3-D printer, lots of fast talk and an arduino attached :)
We are the REAL deal :D
A really 'Bright' and useful idea for sure, John! Well done!
that's a cool project, it turned out great, I'd love to try this myself! I've done a couple of very similar projects but smaller, I found that I gained a lot of light using aluminium foil glued as a backing.
Nice build a toggle switch between the battery and box might be a good addition thanks for the video
i want to make something this!, but as a table top for a club scene that i'm shooting in my movie! this video is EXCELLENT!
Smooth workmanship.
I have all kinds of those leds I might just copy you build John. Great job as always
Hi, John. Could you give us the link for the LEDs you got for this project? Thanks!
Now THAT's a bright idea!
This is exactly what I was looking for. Bless you!
Pretty awesome arrangement you got there! Very nice video gear project!
Good work. From my experience with LED strips I suggest you to give under the LED strips some piece of aluminum as a heat sink.
Nice. All you need now is a monitor and perhaps a teleprompter to attach to your gantry. Okay perhaps you don't need it but it'd make it way cool looking.
Excellent as always brother.
Thank you for sharing us your knowledge dude, great video
Thanks, John. That was nicely explained. I am going to use your diffuser idea when
I make mine!
Nice work, awesome 🤘😎🤘
Has anyone ever told you that, You sound incredible like the narrator off the film Elf! Its uncanny.
Great stuff as always John.
Have been wanting to do something like this for a while now.....Will need to step down the voltage for the batteries I would like to try and use. Thanks John!
....and John said, “Light,” and there was light. John saw that the light was good, and he separated the light from the darkness by building a project with LEDs...and it was good
...and it was wood.
I have LED stripes with the self-adhesive backs that I put under my kitchen cabinets. If you light the LEDs before you stick them on a surface the glue heats up a bit allowing them to stick better. (knocking on wood) I haven't had any issues with the strips not sticking.
Nice build! 👍👍
Wow, great one. I should have paid more attention in wood shop.
Hello, what you use typw panel for this 2:22 can you give me website for this product ?
yea i cant find it eithier
I think acrylic sheet
For best results, is much better put in parallel led lines. Good job !!
Hot glue works to attach LEDs, its fast and simple. They all suck at sticking. Thanks for the build, going to make a few of these for my kitchen ceiling.
Quite a while ago I was involved in building some similar light (at least for the purpose), and the major difference we he was putting on top of the LEDs (before the diffusor layer) a thin sheet of shiny polished aluminum (where there were cutouts for the LEDs). This way it was noticeable brighter and also had a slightly improved CRI.
Great project! Very neat cuts:-)
Nice build.
Great project John, and well explained ,mate
Cheers
Mike
If it helps there is a primer used for pre sticking down peel and stick floor tiles. It helps bind peel and stick vary well to plywoods.
You are awesome sir, I sub ur channel since the day I saw your video "Can paper cut the Wood" it was amazing experience. You are hard working man, and you deserve success. May God bless you and all Hard working men & women.
I’ve made several of these for free. I find a flat screen TV with a cracked screen in the trash, remove the cracked screen and it’s long narrow board, remote IR sensor board, speakers, and leave pretty much everything else and viola! Although the LED strips,CCFLs or whatever you find in a flat screen TV might not be the kind you want(warm white, cool, etc)…. They make for great light tables Atleast.
Great but what is the front cover than you bought from home center? What is it called ?
Can you make a video of what wiring and battery you used ?
Beautiful work!
Pretty cool. I think I'll make my own light.
if you want better soldering you can try hot soldering instead of cold soldering. With hot soldering you make the wire touch the smd strip and heat them both up until the tine melts onto it, instead of heating up the tin and putting it between the two.
also i think the reason the strips come loose is from the heat, LED's do not get as warm as other light sources but all the heat is generated at a very tiny spot at the base and it has nowhere else to go.
Great work, John. I always learn something.
Very cool and bright!
have you thought about a deans plug set-up to more easily connect with the battery?
and great project!
Very nice, John Heisz
Really great video equipment John!
I'm looking to do something similar, but for ceiling lamps instead and I wasn't sure of how to run the LED strips. I think I know now. Thanks!
Excellent proyect!
What is the name of the acrylic or white cover that diffuses the led spots?
Very cool idea, John ;)
Always mount those type of LEDS on a sheet of aluminium to dissipate the heat, plus it will stick better.
nice project John thank you for this
cool video, haha i install these strips for hotels. these lights are awesome to use and can look cool in the room
Liked it...very neat & does it's job & you have good skills too.👍
Sir..which diffuser sheet you have used in the video at.3.33 min? Pls mention the acrylic sheet details.
Do you need to add an in-line resistor to drop the voltage from the adapter?
I want to give you a quick tip. I've been soldering up a 5m piece of RGB LED-strip and I found out that with the many soldered connections that I made, that there was only 9v left at the last piece, compared to the 12v at the beginning. This resulted in more dim LED's at the end of the strip. My tip is to have connect the 12V lead that is coming from the supply, to somewhere halfway too, to counter this voltage drop (due to resistance that are now made with the solder and cables.
Edit: well, since you've closed it all up, I guess it's a tip for the next time ;)
That's awesome John!
How are you finding the heat management? Most of the 5050 LEDs I've tried get very hot, especially running from an SLA battery which tends to put out closer to 13v. If you run them at around 11.5v they run a lot cooler, and will have a much longer working life.
Is the little circular mirror for a different part of the gantry?
Very soft but bright. Nice work (but not in your special electronics basement room - haha)! That gantry is looking more like a movie set gantry. Just put a seat on it and a little hydraulics and you will be all set to film Mr. Focus! Lights, camera, action. Ok ok no action from him.
Enjoyed the project. Thanks.
A great option. I have in the shop are like that. Lighting comfortable. For the video a like!
Can you add a link to the site where you purchased the LED strip from please.
Very nice job!
Are all LEDS wired in parallel? What voltage battery did you use. Could you have used a small DC power supply and eliminate recharging the battery? Nice job
Congratulations. Very cool.
excellent work, well explained
Sweet job 👍
Thank you :)
How long would that last? Planning to use LED as my ceiling light. there is 3 meters distance from floor to ceiling. Like cover the whole ceiling with this
What was that SLA battery? It looks small like a 6V 1.2A, but I think I'm half blind. Is that a 12v? Thank you
I love that design, the only thing I would have done different is build one for myself! LOL great video... ATB - Michael
Yes u r right
Morning John what a awesome idea. It’s been 4 yrs
I hope your able to answer my?
1. How is it as of today
2. What led strip did you buy
3000k 4000k etc and where did you buy them. A item number or? Would be helpful. Thanks
very cool set up!
Clever stuff mate 👍🏻
Do you have a link for the items you used? Specially the leds
thank you for sharing your amazing work, you have a new subscriber, greetings from Mexico