I goofed up at 8:00 I know!! I meant to say our electricity costs 10 cents/kWh, and 7.632kWh per DAY. Daily/hourly cost is still correct. OOPS! 😂 Comment below how you think I should add RGB lighting! **Reminder: Do not try this at home. I do not leave this plugged in unsupervised, and mostly did this for entertainment purposes. I understand the safety risks involved!**
@@justinstephens72 you would need something like this installed by an electrical company or get a home owners permit to have it inspected and approved. Use non-chinese made, state/province approved electrical equipment etc.
@ not rly... the more light the better you can see.
4 роки тому+3
@@poiiihy Here's a real truth about light: the stronger the light, the darker the shadows. Also, don't look at the sun, or you won't see anything at all.
Probably because it's too bright for the camera to register ceiling brightness gradients. You can see them only briefly on the video, but your eye would notice. Still, looks awesome!
Loved the technique you used to give a professional look to those brass buttons - I'll have to remember that! Thanks for the shoutout btw :) nice work on the project! Right up my street.
Wow the man himself! Thanks so much Matt. As someone that's watched all your videos, I feel you should know I'll be switching these out for higher CRI strips in the future, thanks to the education provided in your videos. 👍 You're a huge inspiration.
I would to. The only problem is the cost of it. But if you find a cheap way to power it. Maybe solar you got a winner. This would be great for the garage to
Yeah totally I would keep that permanent! As for cost, you don't always need to leave them all on, but the ability to fully adjust as needed is really cool.
I wonder if motion sensors would be accurate enough for this job. Of course one can just cram a lot of them per area, but the question arises if it's even worth it
I do this with my LIFX setup, it's very nice - although I simplified it to 10pm and midnight. I have it go to a very dim red at 2am so we don't bump into things for those late night gaming sessions :D
Aw yisssss like a lotta phones come with that night mode automatic blue light removal throughout the day. I wanna do something like this at my place, maybe even have a light sensor outside so the inside lighting just basically mimics it. Unless it's dreary and cloudy outside...
I did this a while back, works great! here's how I did it: -opened window blinds Unfortunately I'm retricted to using different shades of blue, orange, and gray.
Usually those little touch sensor modules have empty pads that you can bridge together and change them from momentary switches to toggle switches, then you could hook those up directly to the relay board and not use the microcontroller. Awesome video tho, the switch plate is dope
Holy shit, you just made my night. This is why I love UA-cam. You're absolutely right, there's even a little symbol for it and everything! Thanks so much!!
Was hoping he'd read this comment? And he has! Which is great cause that was exactly what I was thinking as I watched this. Btw internet people's those of you who are disturbed by the fact that home techies like us would want to remove a controller? There's a simple explanation in this thinking process. We aren't getting rid of controller. We are freeing up a whole controller to be available for a project where it can actually be utilised to a better capacity. I'm forever looking at things and thinking why didn't they use relays and jumpers to make "physical" logic gates? 🤔 Nearly every combination of computer mathematical logic can be configured into an electrical circuit utilising a few cheap components? I.e basic logic like AND, OR, NOT etc. Most people wouldn't need much more than those logics with most of the projects that want to take on at home?
For drilling that hard type of plastic, and acrylics, polycarbonate and brass, grind the lands of your drill square so that it scrapes away at the material. If sharp and digs in like a chisel, will load up and crack or chatter every time.
Great project! So.. regarding the RGB. You can add green to the footers around the whole perimeter. And blue to the "header", near the ceiling. That gives you a nice relaxing garden to work on. xD For added effect, at the end of the day/morning you can have a strip of orange/red light up in the header (sunset). The ceiling light could also change temperature as a function of time in the same way too.
That was great information and an amazing look when all done. I love the way you showed the voltage drop and then all the total readings in the end compared to the specs. Very informative.
This is really neat. When you do create a permanent led ceiling like this, having those RBGW LEDs would be really good for creating a few specified ambient light settings. What if you also had a control switch like this at your computer desk via bluetooth or wifi as mentioned with the board you said you had, so you can change a light setting while sitting there?
@@theandonlyboss lol he meant to comment that under the video, for some reason he replied to your comment instead, what he's talking about was mentioned towards the end of video, around 7:50.
crazy idea: get individually addressable led light strips (each led should be individually addressable), and then code it to do crazy diagonal waves or something
Such a great video, and I wanna do this now! Might be a bit late to the party for suggestions here, but for addressable leds, maybe you could lay it on the ceiling, parallel to your white strips. In code you'd create abstractions for each fixture square (based on how many LEDs fit inside each one) . That way you could have a nanoleaf vibe going on in the ceiling! Might need some spacers between each fixture to prevent light bleed to get a clean result, though. Quite a bit of work, but it would be quite insane:)
So cool to get a comment from you guys, been subbed for a while! Thank you - and that would be a ton of work to capture the light leak but I plan on doing something similar, just a little less complex :P Thanks again guys!
Obviously addressable leds would be cool but that makes it much more complicated, first of all it is going to be way more expensive, and most are 5volts unless you get the ws2811 that aren't individually addressable but control 3 at a time, so it's definitely possible just going to be more expensive and a little more work
The discrepancy in theoretical vs actual wattage could be due to voltage drop down the length of the LED strip. If you're feeding 12V down a copper trace that is effectively the cross section of a 18-22AWG wire, you could lose a lot of voltage (and therefore current draw) by the end of the strip. What's the voltage at the end of the strip? You could try feeding power from both ends of the strips, thereby improving consistency from end to end?
doubt the spec for the leds is meant for two way power. It’ll probably either have a diode (or burnout) if it is one directional. If it’s not strictly one directional it’ll likely just heat up the strip until failure or at a minimum the power supplies will fight each other. You could cut the trace in the middle effectively doing the same thing by powering 1/2 of each strip. Though if these are wired in parallel 10-15ft strips shouldn’t be awful. The strips do look like they’re wired up a little whacky too though.
@@9Llamaboy In order to work at 12V the strip it's internally wired in parallel blocks, there's not such thing as "bidirectional power" or "fighting power supplies" you have a lot of homework to do
@@9Llamaboy In these strips you normaly have a positive and a negative line going from one end to the other, like in a power cord. The LEDs (or groups of them) are put in parallel between these two lines. If you draw that on a piece of paper, you will see that you can feed the strips from both ends. For reference: Look up the UA-cam channel "Intermit.Tech". He showed what happens, when you feed power to a length of LED strip in different ways. Spoiler: Buy sun glasses.
@@Coltography als you can tune the votlage of the PSUs with the little orange trimmer. measure at LED strips, and tweak until you have 12V there. you may have liek 14V at the output of the PSU and still only 12 at the strips.
Man your knowledge is pretty impressive. The lights are way overkill, but the 3D printed touch button panel and switch controller panel is really cool.
@@MrBonners coltography's work is as good as an actual electrical engineer and so the actual engineers are replaying this video. its more or less a compliment but how could you seriously not see this.
I need this in my life. I've been trying my best to "get enough light" in my bedroom without it looking too weird, and I'm just done trying to keep it looking sane. LED tile ceiling it is.
Speaking of DIY Perks, I haven't seen any other videos in a similar wheelhouse come close to his quality, except this video. Please do more videos! Inspires me to tinker more!
WOW. your attention to detail, creativity, and craftsmanship are mind-blowing. I am an architect 30+ years looking for ideas for a luminous ceiling, and you set the bar very, very, very high. Seriously lovely result. Wasted on your office? The famous finale scene in ‘2001: A Space Oddity’ is in a room with a luminous ceiling. You could do so much more with this.
Yeah, he should have a go at doing it with dimmable LED strips. It'd be great to have them fade in slowly pre-wake up and slowly dim to a warm glow in the evening. I guess that's more practical for a bedroom than a study though.
@@MACTEP_CHOB in my bedroom I have a warm 4W led bulb in a lamp, plugged into a digital timer. It turns on 15mins before my alarm time on weekdays and has a 20min countdown I use so it shuts off after I go to bed. Cost less than $10 😄
He probably does in the room now lol He started googling uses for a heavily lit room and realized he created a grow room if he adds some more light power lol
This is way overkill, but you could add addressable RGB strips in between the white strips and map out a grid so you can have ceiling-wide lighting effects. This entire project is a little excessive, but I absolutely love it and this makes me want to do this to my ceiling, or just a wall in my house lol
This whole thing went all over my head and made me feel stupid, but then I realized I have a different set of skills that I'm proud of. Keep up the good work.
You are thinking something else to be added to that whole project, and here I am already impress by this "still need improvement" (according to you). I am at awe!!!!! 😮😮😮😮😮 WOW!
The rest of the room is in desperate need of a makeover now. I would suggest orange shag carpeting, solid oak cabinets stained dark under the bench, orange laminate bench top, brick veneer glued to the walls, and a corinthian leather office chair.
AMD1 Brick Veneer which is an 80’s style is already back in new homes, I was at the home reno and builder show The 80’s style is coming back according to the various booths they had! Dark oak 70’s/80’s wall paneling is back now as well! I noticed antique brass and chocolate to blackish brown fixtures are back too! 4 Wicker blade spinner bell canopy variable speed ceiling fans are popping up in lighting stores again! I know all this stuff because I come from a long line of home builders!
For real, look up glass/prism sidewalks, popular in the 1850s-19 somethings, everyone forgot about them till recently. Concrete sidewalks with little glass prisms inside to let light from the floor above in, or the light from inside up through the sidewalk. They should bring this back for sure.
Add dimming function and use Mean Well drivers, they're far more efficient for a little higher cost than those chinese eBay power supplies. (HLG series I use for my hobby)
and they are legal. you can use chinese led strips but as long as the "high voltage" is approved and of known brand company the electrical inspectors dont care. also in my country anything that is plugged into a plug and not directly connected is not apart of the electrical installation therefore does not need to be inspected.
The reason you calculations are off is because the 0.2W is for max usage which would require a heat sink to cool them. So most manufactures don't end up actually running them at full power.
Wow this is amazing! I'm definitely going to create one of these myself. And by that, I mean I'm going to think about it for 5 minutes then forget about it.
You’re like a contractor from the future. A handyman that is comfortable with power tools, soldering electronics, and computer software. You have a versatile skill set, my friend.
I goofed up at 8:00 I know!! I meant to say our electricity costs 10 cents/kWh, and 7.632kWh per DAY. Daily/hourly cost is still correct. OOPS! 😂
Comment below how you think I should add RGB lighting!
**Reminder: Do not try this at home. I do not leave this plugged in unsupervised, and mostly did this for entertainment purposes. I understand the safety risks involved!**
How can one make this safe?
@@justinstephens72 you would need something like this installed by an electrical company or get a home owners permit to have it inspected and approved. Use non-chinese made, state/province approved electrical equipment etc.
Add rgbs it would look so dope
@@Coltography pin both his question and this answer, please. This is too epic. A lot of people are going to try to it, lol.
If you ever add RGB, use addressable LED strips and run snake game on your ceiling! ;)
8 million addressable LED's and you could turn your ceiling into a 4k monitor.
Just sayin'.
No. 100
@@F17A
,more precise actually only one since 4k is just a line, 4096 ,
and you multiply with 2k lines (2160) you get 8294400 pixels
Honestly, I'd be happy with VGA resolution if it means you'll actually do it. 😁
@@ehombane 4k is usually 3840 wide instead of 4096
Do it
This is by far the cleanest, most concise implementation of a lit ceiling I’ve ever seen. Outstanding job dude 🤙🏼
Every walk-in closet , kitchen, and garage needs this.
Colour changing leds with a remote and you can dim it and have mood lighting lol
That amount of total lumens is overkill for every situation, but it surely looks nice.
Not to mention sewing , craft and laundry room. I'm so sick of a shadowy house under the trees. Can't see sh--.
@ not rly... the more light the better you can see.
@@poiiihy Here's a real truth about light: the stronger the light, the darker the shadows.
Also, don't look at the sun, or you won't see anything at all.
“It’s not perfect, it’s pretty half decent”
Bro that looks perfect to me lol
Literally what I was thinking. It looks perfect.
Probably because it's too bright for the camera to register ceiling brightness gradients. You can see them only briefly on the video, but your eye would notice. Still, looks awesome!
Loved the technique you used to give a professional look to those brass buttons - I'll have to remember that! Thanks for the shoutout btw :) nice work on the project! Right up my street.
Wow the man himself! Thanks so much Matt. As someone that's watched all your videos, I feel you should know I'll be switching these out for higher CRI strips in the future, thanks to the education provided in your videos. 👍 You're a huge inspiration.
Love your work guys
Me seeing this guy here is like woaaaaaaaaaaht?
:D
DIY Perks you rock, mate.
Anyone else read the comment with his voice in your head?
Why on earth would you not want to keep this forever. THIS IS AMAZING!
Totally . Its amazing . I want one .
I would to. The only problem is the cost of it. But if you find a cheap way to power it. Maybe solar you got a winner.
This would be great for the garage to
Yeah totally I would keep that permanent! As for cost, you don't always need to leave them all on, but the ability to fully adjust as needed is really cool.
I assumed he is renting
@MATT S maybe a Panel with individual addressed LEDs will replace it so he has some kind of Screen as a Ceiling Light.
Really good editing. Didn’t feel the need to skip through anything
Every part was very useful and content rich
You should put sensors under each one so it lights up when you walk under it.
nice idea
Damn , a month too late ,that was my thoughts too when i saw the thumbnail
An Inverse Billie Jean.
I wonder if motion sensors would be accurate enough for this job. Of course one can just cram a lot of them per area, but the question arises if it's even worth it
@@waiitwhaat no its not to me seems dumb just add rgbwww
Your ceiling is brighter than my career.
that ceiling is brighter than my phone at 3 am when i check the hour
Lol lol...🤣😅😥😭 my career has no brightness😭
Haha, I can help you guys out with your career 👍
in other words his ceiling is brighter than his career
lolz
Until now I didn’t realize I want a ceiling like that...
Means now u do
Exactly lol
I want one ... with RGB leds ... 🤗
Me too!
You will repair this led every month
Have you made a floor yet? I’d like a portable “Billy Jean” type of LED flooring that lights up a dance floor.
Yeah, but then you'd have to learn to dance as cool as Michael Jackson. That ain't gonna happen.
@@guygordon2780 Just walk backwards and punch your nuts every 10 seconds
All jokes aside, Michael could move.
2001 a space odyssey vibes
BRO
I'm done with this ceiling. Thanks for the inspiration ❤️
I was searching for this after your video. make a video on your ceiling as well in malayalam?
@@AjmalHameed I'm on it 😇😇
@@MalayalamTechOfficial ushaaarakk.. waiting for it ❤️
Atha njanum aloiche ith malayalam techinte allenn....
2:30 Good to know I’m not the only one that snorts brass powder
Doesn't everybody?
Browder.
Who else was looking for this comment ???
As an electrician, you earned my respect and a sub, can't wait to see more projects in the future!
Wow!
As an electrician, why isn't this safe? I mean I am seriously considering going for it.
"Pretty half decent"? Are you _kidding??_ This is *perfect!*
I am most impressed with how you got that led strip adhesive to stick on that ceiling
Damn right
Its the shittiest quality adhesive 😂
🤣🤣🤣
I'm glad this video introduced me to another guy who's interested in film, lighting, and synthwave
You honestly seem like the type of person who'd really enjoy wiring up a pixeltape project and controlling it from Madrix or Resolume
this is one of my fave synth wave tracks ua-cam.com/video/3uI9Hh26OTs/v-deo.html
It would be cool to change color temperature as the day goes to night, might help as well to keep track of time using the lights 👍🏼
Lit at noon and blackout at night? :)
plagosus more of a cascade from 6600K to 3000K - MacOS Catalina has a dynamic wallpaper that does the same :)
I do this with my LIFX setup, it's very nice - although I simplified it to 10pm and midnight. I have it go to a very dim red at 2am so we don't bump into things for those late night gaming sessions :D
Aw yisssss like a lotta phones come with that night mode automatic blue light removal throughout the day. I wanna do something like this at my place, maybe even have a light sensor outside so the inside lighting just basically mimics it.
Unless it's dreary and cloudy outside...
I did this a while back, works great!
here's how I did it:
-opened window blinds
Unfortunately I'm retricted to using different shades of blue, orange, and gray.
Create a body-tracking mode. Tiles would light up only where a person is currently located.
Edit: Spelling
I've been meaning to do that in my home for a while.
Would be cool until the light up by themselves at night
@@BOfficial Creepy...
Do that on the floor, and you got this: ua-cam.com/video/Zi_XLOBDo_Y/v-deo.html
Erik van der Neut lol, that billie jean😂😂
Compared to workshop lighting that's generally made with fluorescent tubes, this is better on every level
I didn't think I was gonna make it through ten minutes of "I put up some lights" but your presentation is great. Thanks for starting with "WHY??" lol
The ceiling from the street looks like it leads to the afterlife
i agree
how do you know it doesn't???
@@TheWindows72306 I never said it doesn't
U mean PURGATORY?
Pretty half decent... Wtf dude?!
Thats so crazy, I dreamed of something like this for a long time!
Came to the comments with the same thought as the first half of yours. This vid/project is excellent--
I really enjoy the Resonance - Homme music in the background
It's very...Home-y, if you will.
Thats not Resonance! Its We're Finally Landing by Home !
@@tesslora 4:13 There's Resonance
Home is an amazing artist. Check him out.
Summoning salt vibes
If i ever own a house i am gonna show a contractor this video and say do this.
+1
Don't say the "do", just say "this", and start crying in his lap.
Narrow spectrum lighting in my house? No thanks I value my retinas.
Just get LED panels and dont install any normal tiles in a drop ceiling.
The method used in this video doesnt save money, or time.
Yeah yet how much will they ask, it should be expensive
i like how he says nothing permanent so he doesn't get any shit in the comments... but in all reality we know it is 😂
LOL >_>
TheNonSmokingTire FACTS!
Nothings more permanent then a temporary solution
Coltography need a entire list down to the relays and wires this is going in my kitchen
Soul of Envy I never heard anything more true before lmao
Somebody from the street: "who tf stole the sun"
I just love the subtle dark humor thrown in. Really cool build!
UA-cam recommended this to me. Stayed because I appreciate the creativity. And I especially appreciated the taste for synth wave
Same.
This is by far is the coolest thing and the best video i’ve ever watched this entire quarantine period
2:30 Snorting brass powder.
That good good bro only $500/kg
Earned my sub right then LMAO
Go for a catscan after
@@ANDUAN93 same
Unbox Therapy: huh, this looks neat
Time stamp checks out
Usually those little touch sensor modules have empty pads that you can bridge together and change them from momentary switches to toggle switches, then you could hook those up directly to the relay board and not use the microcontroller. Awesome video tho, the switch plate is dope
Holy shit, you just made my night. This is why I love UA-cam. You're absolutely right, there's even a little symbol for it and everything! Thanks so much!!
Was hoping he'd read this comment? And he has! Which is great cause that was exactly what I was thinking as I watched this.
Btw internet people's those of you who are disturbed by the fact that home techies like us would want to remove a controller? There's a simple explanation in this thinking process. We aren't getting rid of controller. We are freeing up a whole controller to be available for a project where it can actually be utilised to a better capacity.
I'm forever looking at things and thinking why didn't they use relays and jumpers to make "physical" logic gates? 🤔
Nearly every combination of computer mathematical logic can be configured into an electrical circuit utilising a few cheap components? I.e basic logic like AND, OR, NOT etc.
Most people wouldn't need much more than those logics with most of the projects that want to take on at home?
@@Coltography would love to know where I could get some of those touch sensors you used in the switch
Jarmezrocks me not knowing a thing or two about this makes you sound like a genius, holy shit so much info to take in, sounds so complicated.
Wow man this is stunning. I might have to try this for my printer room
Your what
@@blu-rae864 you blind his printer room bro
Wai a minute.....
I wish I could have a printer room lol
USE COLOR LEDS lol
Just a heads up, step drill bits would most likely stop the plate from snapping like it did.
athornforeveryh flexible wall plates do not break like this.
For drilling that hard type of plastic, and acrylics, polycarbonate and brass, grind the lands of your drill square so that it scrapes away at the material. If sharp and digs in like a chisel, will load up and crack or chatter every time.
JUst by a drill made for drilling plastic!
Great project!
So.. regarding the RGB. You can add green to the footers around the whole perimeter. And blue to the "header", near the ceiling. That gives you a nice relaxing garden to work on. xD
For added effect, at the end of the day/morning you can have a strip of orange/red light up in the header (sunset). The ceiling light could also change temperature as a function of time in the same way too.
"this is not permanent"
"if I want to add automation in the future"
Hehe
I was looking the video and thinking "I NEED THIS IN MY WORKSHOP". Sad thing I don't have a workshop.
same here, Hong Kong has too little space.
Made me laugh so hard
Same!
you killed it
I need this in my flat. I fucking HATE point sources of light. Can't read a fucking book without my own head blocking the light.
bruce wayne just called and he want his garage back lol
i am literally watching the dark knight right now and i saw this comment lol
he needs to have a model of the batmobile on one of his shelves
@@ge2719 Are you saying Bruce Wayne...
...is the batman?
That was great information and an amazing look when all done. I love the way you showed the voltage drop and then all the total readings in the end compared to the specs. Very informative.
RGB gaming ceiling is the only logical next step
It will run crisis.
@@Coltography So "Which resolution has your ceiling?" is a legitimate question now?
People outside be like WTF 😧
I actually want to do this
Coltography: "Now I just can't tell if this looks plain awful or kinda nice?"
The entire Internet: "OMG THIS IS FRIKKIN AMAZEBALLS"
Damn, looks like I’ll have to make a batcave soon too 👀
This is really neat. When you do create a permanent led ceiling like this, having those RBGW LEDs would be really good for creating a few specified ambient light settings. What if you also had a control switch like this at your computer desk via bluetooth or wifi as mentioned with the board you said you had, so you can change a light setting while sitting there?
Maybe add RGB’s and do like a rainbow effect of different colors like the back of your tv was in previous videos.
There’s no way your electricity cost is $.01, more like .1 / KWh
Dan Abell ???? I never said it cost that. Wtf?
@@theandonlyboss lol he meant to comment that under the video, for some reason he replied to your comment instead, what he's talking about was mentioned towards the end of video, around 7:50.
There's so many ideas. I would think about a clock and rainbow 🌈 🕒
no rgbw lights
Neighbour: "Rosie! Come to the window, the aliens are abducting a tenant again!"
😂
Nah, that's what he'll say after guy installs RGBs
crazy idea: get individually addressable led light strips (each led should be individually addressable), and then code it to do crazy diagonal waves or something
That will be awesome!!
you could program it, so that you'd have tic tac toe on your ceiling.
This lighting setup looks perfect for Stop Motion Animation! I dont know anything about electronical unfortunately or I would do this myself!
Such a great video, and I wanna do this now! Might be a bit late to the party for suggestions here, but for addressable leds, maybe you could lay it on the ceiling, parallel to your white strips. In code you'd create abstractions for each fixture square (based on how many LEDs fit inside each one) . That way you could have a nanoleaf vibe going on in the ceiling! Might need some spacers between each fixture to prevent light bleed to get a clean result, though. Quite a bit of work, but it would be quite insane:)
So cool to get a comment from you guys, been subbed for a while! Thank you - and that would be a ton of work to capture the light leak but I plan on doing something similar, just a little less complex :P Thanks again guys!
Obviously addressable leds would be cool but that makes it much more complicated, first of all it is going to be way more expensive, and most are 5volts unless you get the ws2811 that aren't individually addressable but control 3 at a time, so it's definitely possible just going to be more expensive and a little more work
The discrepancy in theoretical vs actual wattage could be due to voltage drop down the length of the LED strip. If you're feeding 12V down a copper trace that is effectively the cross section of a 18-22AWG wire, you could lose a lot of voltage (and therefore current draw) by the end of the strip. What's the voltage at the end of the strip?
You could try feeding power from both ends of the strips, thereby improving consistency from end to end?
Very good point!! I am going to try this and see how it affects the results. Thank you for the excellent suggestion.
doubt the spec for the leds is meant for two way power. It’ll probably either have a diode (or burnout) if it is one directional.
If it’s not strictly one directional it’ll likely just heat up the strip until failure or at a minimum the power supplies will fight each other.
You could cut the trace in the middle effectively doing the same thing by powering 1/2 of each strip. Though if these are wired in parallel 10-15ft strips shouldn’t be awful. The strips do look like they’re wired up a little whacky too though.
@@9Llamaboy In order to work at 12V the strip it's internally wired in parallel blocks, there's not such thing as "bidirectional power" or "fighting power supplies" you have a lot of homework to do
@@9Llamaboy In these strips you normaly have a positive and a negative line going from one end to the other, like in a power cord.
The LEDs (or groups of them) are put in parallel between these two lines.
If you draw that on a piece of paper, you will see that you can feed the strips from both ends.
For reference: Look up the UA-cam channel "Intermit.Tech". He showed what happens, when you feed power to a length of LED strip in different ways.
Spoiler: Buy sun glasses.
@@Coltography als you can tune the votlage of the PSUs with the little orange trimmer. measure at LED strips, and tweak until you have 12V there. you may have liek 14V at the output of the PSU and still only 12 at the strips.
Street view of just how overkill it looks is gold 😂
Looks freaking good. Ability to control the brightness, is the thing that should happen next before the RGBs :) Nice Work !
1:30 "I just used a stick with some markers on it to make sure they were evenly spaced."
There's an individual who refuses to be ruled.
you should have been in the 1-2k likes with this comment
Massively underrated comment. Do your job UA-cam!
But he has a measured perspective on things.
Man your knowledge is pretty impressive. The lights are way overkill, but the 3D printed touch button panel and switch controller panel is really cool.
Coltography: I'm not an Electrical engineer
Electrical engineer
: *hit replay button*
your point?
@@MrBonners r/wooooooosh
@@MrBonners coltography's work is as good as an actual electrical engineer and so the actual engineers are replaying this video.
its more or less a compliment but how could you seriously not see this.
Why the wooosh tho? He honestly didn't understand the point
@@SreenikethanI i think that wooosh is misused
That hot melt is a saviour trick for lots of things.
Nice to see a Pro uses it too.
Lol not a pro!! Thanks though ;D
"Oh, look Margaret... The neighbours are being probed by aliens, again!"
I need this in my life. I've been trying my best to "get enough light" in my bedroom without it looking too weird, and I'm just done trying to keep it looking sane. LED tile ceiling it is.
Speaking of DIY Perks, I haven't seen any other videos in a similar wheelhouse come close to his quality, except this video. Please do more videos! Inspires me to tinker more!
WOW. your attention to detail, creativity, and craftsmanship are mind-blowing. I am an architect 30+ years looking for ideas for a luminous ceiling, and you set the bar very, very, very high. Seriously lovely result. Wasted on your office? The famous finale scene in ‘2001: A Space Oddity’ is in a room with a luminous ceiling. You could do so much more with this.
Hey thanks man!! Doesn't stop here, I have lots of plans for the future when I acquire the funds. Thanks again!
It’s like a room for people with the most severe Seasonal Affective Disorder
Yeah, he should have a go at doing it with dimmable LED strips. It'd be great to have them fade in slowly pre-wake up and slowly dim to a warm glow in the evening.
I guess that's more practical for a bedroom than a study though.
David Hill - That would be so cool
@@iamdave84 That's Philips Wake-up Light alarm on steroids 😁
@@MACTEP_CHOB in my bedroom I have a warm 4W led bulb in a lamp, plugged into a digital timer. It turns on 15mins before my alarm time on weekdays and has a 20min countdown I use so it shuts off after I go to bed. Cost less than $10 😄
@@iamdave84 Yeah, already ordered smart led from ali. Cost like 5$ can connect from phone and set timers for different days.
"Half decent?!" U did a better job than some of the "professional" ones we have here! Great job man! 👍👍👍
"neighbors going to think u have a grow house" 😂😂😂😂
He probably does in the room now lol He started googling uses for a heavily lit room and realized he created a grow room if he adds some more light power lol
This Is Not Half Decent, Its More Than Decent!
I Love This Project
9:37 street view of the apartment looks like you have a mini sun inside your apartment or alien abduction in progress ;)
Coolest LED project I’ve seen, I wish this was a tutorial I have a perfect spot for this application.
7:43 Me trying to understand the wiring
LOL
he said it in the description. But I don't see anything
My favorite part was the light switch interface. Very cool.
wheres the wiring diagram? would be interested to see how this was all wired up indepth! :)
7:44 "...for you know, just regular day-today activities"
(shakes hands in the air like crazy)
Most LIT 10 min video I've ever seen
I started this video thinking this could be something I’d do... I finished realizing I have no chance of doing that 🤣. Great video my man!
This is way overkill, but you could add addressable RGB strips in between the white strips and map out a grid so you can have ceiling-wide lighting effects.
This entire project is a little excessive, but I absolutely love it and this makes me want to do this to my ceiling, or just a wall in my house lol
That's the plan!
Not just A wall... EVERY WALL
and the floor too if you have the time
Dude... WOW
I was literally thinking about your channel today with a "I wonder what he's up to it's been a while" and here you are being Bruce Wayne
Also, please throw a Breaking Bad themed party with the yellow suits, masks, gloves and all 😂 Then your neighbors will REALLY love you hahaha
This is awesome. Reminds me of the end of 2001: A Space Odyssey
This whole thing went all over my head and made me feel stupid, but then I realized I have a different set of skills that I'm proud of. Keep up the good work.
This is like Kevin Flynn's house in Tron Legacy.
Jacob Deutscher that’s exactly what I want to do! I’ve been designing in my head ways that I can build that floor lol
I can't hear that intro without being ready to hear some good-ass stories about speedrunning.
THANK YOU I'm glad it's not just me
Who is it? That sounds familiar
@@bernardw7535 Summoning Salt is to whom I was referring. The song is listed in the description of this video so fuck you if you were asking that. :D
This is the future of upscale housing. Imagine such a drop-tile ceiling with quality, dimmable RGBW lights and Zigbee or similar tech.
Actually long time ago there was concept of ceiling like that using organic leds.
@@MACTEP_CHOB Neat, do you happen to remember what it was called?
@@Decide85 Organic led panel 😁
Waste of energy dude
@@MicroageHD In its current configuration when all the lights are turned on, yes.
Holy cow, such a awesome solution!
This looks kind of like the diy perks artificial skylight, but this is cooler.
You need to sell this kit online. I'll be the first to buy it. This is magical. Fantastic job. I love you.
too much liability I'd think
You are thinking something else to be added to that whole project, and here I am already impress by this "still need improvement" (according to you). I am at awe!!!!! 😮😮😮😮😮
WOW!
Heh, this is basically the "sunshine ceiling" trend from the 70's/80's, redone in LED instead of fluorescents. Everything old is new again...
The rest of the room is in desperate need of a makeover now. I would suggest orange shag carpeting, solid oak cabinets stained dark under the bench, orange laminate bench top, brick veneer glued to the walls, and a corinthian leather office chair.
AMD1 Brick Veneer which is an 80’s style is already back in new homes, I was at the home reno and builder show The 80’s style is coming back according to the various booths they had! Dark oak 70’s/80’s wall paneling is back now as well! I noticed antique brass and chocolate to blackish brown fixtures are back too! 4 Wicker blade spinner bell canopy variable speed ceiling fans are popping up in lighting stores again! I know all this stuff because I come from a long line of home builders!
For real, look up glass/prism sidewalks, popular in the 1850s-19 somethings, everyone forgot about them till recently. Concrete sidewalks with little glass prisms inside to let light from the floor above in, or the light from inside up through the sidewalk. They should bring this back for sure.
"I wasnt final on anything I wanted"
10 seconds later
"..I just soldered everything together"
love the brass cocaine reference haha
Hahah thanks Liam!!
@@Coltography I was surprised af only one other person commented about it! 😄
"It's not perfect." What?! This is soooo damn perfect!
Add dimming function and use Mean Well drivers, they're far more efficient for a little higher cost than those chinese eBay power supplies. (HLG series I use for my hobby)
and they are legal. you can use chinese led strips but as long as the "high voltage" is approved and of known brand company the electrical inspectors dont care. also in my country anything that is plugged into a plug and not directly connected is not apart of the electrical installation therefore does not need to be inspected.
He could always just program them ( they look like programmable? If not just spend the money since you are already there) to be like 30% Brightness
Do the walls also !
And the floor😂
if the room was empy this would look bad ass clean.
You could make a music video in there by then.
lol rediculious... do it!
The reason you calculations are off is because the 0.2W is for max usage which would require a heat sink to cool them. So most manufactures don't end up actually running them at full power.
Wow this is amazing! I'm definitely going to create one of these myself.
And by that, I mean I'm going to think about it for 5 minutes then forget about it.
Me everytime I watch cooking channels
“This isn’t permanent”
Me: why?
Rented apartment
@@curlyhairdudeify I own this apartment.
Hahaha
Because permanent installations can only be done by an electrician.
@@DaDunge but who is gonna know about it ?(let's say it ain't on UA-cam) Like I still don't understand
That looks so good! Thanks for documenting everything, I learned a lot watching this
this is so cool I can't stop thinking about it.
You’re like a contractor from the future.
A handyman that is comfortable with power tools, soldering electronics, and computer software.
You have a versatile skill set, my friend.
Make your ceiling into a giant game of Snake
**Hears Summoning Salt's intro music**
**gets happy** :D
I hunted for this comment.
Instant win imo
He's going for the world record in ceiling lights.
a smaller kinda "The Dark Knight"-style batcave
I was thinking of Tron legacy type floor and ceiling lights.
Fantastic lighting for 'SAD Therapy'.