Transmission Jack Modifications

Поділитися
Вставка
  • Опубліковано 4 жов 2024

КОМЕНТАРІ • 10

  • @BigFun4Life
    @BigFun4Life 2 роки тому +1

    It’s awesome that your son joined you on video..Future mechanic and fabricator..

  • @keltecfan
    @keltecfan 2 роки тому +1

    Hello Shawn. If you can find images of the Sunnex 7750C trans jack, the adjustable pan supports may give you an idea option. They're similar to what we had on an old Hein Warner trans jack that we used back (1970's) when cars had steel bumpers. We'd raise them up, set them on jack stands & roll around underneath the vehicle to yank the trans out. The Hein Warner had the slots milled into the flat stock, and a piece of angle welded to a pin that would swivel in the end of the flat stock. It worked well for many of the older rear wheel drive transmissions.

    • @mountainsgarage
      @mountainsgarage  2 роки тому

      Great info, Thanks!

    • @keltecfan
      @keltecfan 2 роки тому

      You're welcome buddy. There's an ebay seller with an ad up now that has some (pricey) listed with good pictures. If you search for transmission jack corner bracket-corner saddle for 2 stage transmission jack, it should pull up his ad. I tried to post a link but it was a mile long.

  • @BigMikesGarage
    @BigMikesGarage 2 роки тому +1

    Everybody needs an ice-cream sandwich in the snow!

  • @jamieknight9636
    @jamieknight9636 2 роки тому +1

    Hi Shawn, lunch looked good, so did the toboggan run !! I spent some time plotting out the anti squat line and Ic of the Hz this week, looks like I've got some work to do

  • @funfun8095
    @funfun8095 2 роки тому +1

    👍