3 Reasons to Buy the Mopar Grill Guard for your Jeep + INSTALL!
Вставка
- Опубліковано 1 чер 2024
- Welcome to Studio Motors! You are watching 3 Reasons to Buy a Mopar Grill Guard for your Jeep +. Install! Get it Here: amzn.to/3HMueDp
There's a ton of aftermarket Grill Guards and bumpers available for the Jeep Wrangler Rubicon, but if you already have a Jeep with a Steel Bumper, one of the best upgrades you can go for is the Mopar Grill Guard for the Steel Bumper.
Jeeps Steel Bumper option is one of the best options you can get on a Wrangler. It's a high quality Mopar product, and even has the option to remove the end caps, making it a stubby bumper while retaining your original fog lights. On top of that, Jeep now offers two different factory Grill Guards for the Steel Bumper, the Low Profile Grill Guard which is a single hoop, and a triple hoop grill guard which sits a bit higher and wider. Jeep has stepped their game up when it comes to offering in house products and thankfully, they are very well thought out and work perfectly.
Installing the Mopar Grill Guard - the installation is so easy and straight forward, you don't even need any tools outside of what came with your Jeep. Your Wranglers toolkit is all you need to install the Mopar Grill Guard and it's a 5 minute job.
LIKE, SUBSCRIBE, and COMMENT so we can continue to create valuable content for YOU!
➡️➡️ SUBSCRIBE HERE: bit.ly/StudioMotors
Do you like exotic cars, Jeeps, Super SUVs, and supercars?? Want to be kept up to date on upcoming cars? Then look no further because we have a lot of interesting car updates for you! Subscribe now, so you don't miss out on any future posts! Please show your support by subscribing to our UA-cam channel: ➡️➡️ SUBSCRIBE: bit.ly/StudioMotors
Thank you for watching 3 Reasons to Buy a Mopar Grill Guard for your Jeep Rubicon!
Studio Motors
#jeep
#grillguard
#wrangler
#rubicon
#mopar
00:00 Reason Number 1
00:44 Reason Number 2
01:10 Reason Number 3
02:05 Install
03:12 How It Looks
03:26 Recap
03:59 What Does it Do? - Авто та транспорт
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
The Jeep here is the nicest car I've seen on UA-cam. I've rewatched it a lot.
Tuning car needs a lot of knowledge about aesthetics
Thank you.
Hey thank you so much! The new lift is finally installed and I'll be shooting that in the next few days. It look incredible!
If you haven’t got your winch yet, FYI take your time on the installation, put some painters tape on both ends of the winch when you mount it so it doesn’t get scratched the 10 S Zion is super tight fitting, I also advise getting 3/8 inch flex head ratchet with a long narrow handle The more narrow the handle the better, and if you can find an 18 mm medium length socket in other words too long of a socket won’t fit in there and too short of a socket won’t reach the threads once you start screwing it in, I found some at Lowe’s where they sell craftsman tools in the 3/8 sizeuand make sure you have a few different length extensions if not some real long ones because mounting the inside bolts to the frame are a nightmare getting in there and if you’re getting the warn mounting plate, it’s very hard to get the bolts through the front to mount the fairlead, and it’s not a structural integrity area so what I did was where the bolts would go through to the fairlead I drilled those out so I could bolt the fairlead onto the bumper before mounting the bumper this way you can lift all of it up and slide into the holes of the frame and when it slides flush to them whinch plate the bolt heads will go through the holes that you widened otherwise it’s a nightmare and it will be much easier to service in the future if this makes any sense, and if you’re doing it yourself just take lots of breaks walk away from it because it is frustrating but it is doable just take your time buddy. 👍
Fantastic advice, thank you Jon 🙏
Another reason, to note, why the OEM factory Mopar hoop is the best choice is because its design height was intentional in order to not obstruct the front factory trail cam.
Great great point 🤘
Had this on my old 392 before the accident - looks and fits great! Ordering it for the new one I just got 🤙
Duuude that sucks so bad! I'm glad you were able to get your hands on a new one and hope you enjoy in good health
Where are you located? Do you do upgrades and Mods for 392’s? Your channel rocks!
Your videos on the 392 are spot on I purchase damn near everything you recommend. Can we get more 392 content? Thanks.
Thank you, that means a lot!! I have some amazing stuff in the pipeline for the 392. I'm trying to dig deeper into the upgrades we have lined up so its not just a surface review, but gives you as much insight as possible.
Sporty look. Love it.
You crack me up😃😃😃👍👍👍👍
Does it block the front view camera?
Can't use front bumper as a seat anymore! Not getting it because of this
Love it so much now, can we install this to my z4?😛😛
Haha lets go!
How is it with front trail cam?
Does not block the trail cam at all, you hardly notice it on the screen. Let me see if I can upload a pic for you
The link goes to something not showing a 392 bumper. Looks like. Different bumper?
I just checked the link, seems fine on my end. What’s the name of the product you are seeing?
Reason #4: Still have easy access to tow hooks.
Damn stinger posers just got called out 🤣