Love your research. You are performing experiments that offer insight and food for thought which helps a lot of people. Thank you and keep up the good work. One question though. What would your next step be if you discovered a motor that took off and accelerated?
Hi just came across your video . My idea to correct the pile up of magnet forces is to take the set up you have and set say 3 or more on a long bar with bearings on each end. This several individual wheels allows each to act independently of each others magnetic fields. Respectively Ray from Raymondslab
Hi Ray, thanks for stopping by and providing the input. I enjoy your channel and did this video partly to send more viewers your way, but also because I really enjoyed what you were doing with that setup. Keep doing great things!
taper your steel bigger on outer end that one curve it will allow close proximity to next gate w/o interference plus and upward taper will change effect again great job thanks
Привет! Хороший эксперимент. Я смотрел некоторые видео Reymond lab и нигде не разглядел потенциал для того, чтобы можно было построить рабочий МД. Спасибо за подтверждение предположений.
Brother, I just came across your channel. I see you haven't uploaded in a while - it'd be really great to see more content from you as you create some excellent stuff!
I have been amazed at your experiments but have seen you have not put something on youtube in a bit of time. Could you be so kind and change that ?? So all of us on the channel can See Great Things come at us. Thanks a bunch and peace too. Good day.
Hey Motionmagnetics. Check out ZPMM on UA-cam. It appears they too are using a form of right angle magnetics. Just wish there were English subtitles. Keep up the good work!
do you think the friction in the center point plays a role in slowing down the whole system, losing the propulsion that the magnets are generating? maybe if you were to use greased ball bearings or something with less friction it would work better?
Maybe linear to highspeed...unpowered curve then linear again...(oval track). Personally i like idea of 2 strong spiral gates with added striking devices for kinetic energy rebound thru gates. 2 billiard balls smacking each other thru the gate repeatedly...each wheel takes a turn goin arnd.. Your video is thought provoking, tho. Thanks
interesting. what happens if you combine a vertical L gate with a horizontal(as shown) ? in other words if each side consists of 2 L's @ 90 degrees, one vertical & one horizontal, 4 sets of magnets & 2 opposite L's per side......obviously they wouldn't fit together nicely as is.....but you could use rods instead with a perhaps just a flat section for the magnets mount, instead of bars.
Love your stuff but let me give you something to ponder. Gyroscope... the same physics that drive them is fighting the gate. This is why it works linearly but not rotationally. It pushes across not through.
should have enrolled on a course in electrical engineering so you wouldn't have to embarrass yourself on UA-cam with "Look I just discovered something that has been taught for the last 100 years" videos.
I have a question about this setup. What would happen if you used a halbach array to increase the magnetic field in either the moving magnet or the steel plate assembly? I would love to see someone experiment with that. Sadly I don't have the resources to get magnets currently otherwise I would totally do it myself.
Hi Sunshine, with both the rotary an gate have you ever used the Fibonacci spiral as a pattern to follow. Enjoy peace an happiness while manifesting the light an love of life.
I can't help but think about steel as magnetic shielding between 2 like polls. Make more of A u shaped Piece Instead of V and put a piece of steel from between the like Poles at the other end to extend the field further.I wish I could send you a picture
hey Motionmagnetics, as you see the technic is based on that triangle-ish shaped steel plating, I recommend you and Ramond use arcs, of neodymium, it will be much smoother and faster. good structured video as always, however I don't understand why you are using new other technics, other than, applicating the good old HoJo technics, you are so long busy with liniar things, get to the rotor with the assymetrical distances and the gate, the pmmg4hybrid liniar motor, but make it rotory, I know you can do it! kind regards Benjamin Moszkowicz
I learned from Howard Johnson that the best way to start is to work out most of your problems with a linear version of a magnetic motor before attempting to build a rotary version. The pmmg4hybrid version of Johnson's gate won't work in a rotary version. The repulsion at the entrance to the track negates any possible gain. So a rotary version simply stops past each gate. I'll work it out eventually though. Thanks!
Motionmagnetics though a round train track circuit would make it possible as you can assign the magnets to the places where the track is straight, maybe something to think about?
I've thought about that. I've even considered designing the gates along a flat train track and attempting to build up enough motive force to go around an area of round track that would lead right back into another series of flat track gates.
it slows down too fast after the gate so something is making it slow. try using this Halbach Array with it ua-cam.com/video/Ak06g3GVHuc/v-deo.html also try getting a veru high speed before re entering the gate
Love your research. You are performing experiments that offer insight and food for thought which helps a lot of people. Thank you and keep up the good work. One question though. What would your next step be if you discovered a motor that took off and accelerated?
Refer possibly to: Perpetual Motion 7 Wonders Experiments: ua-cam.com/video/03ECZ3skuxs/v-deo.html
Hi just came across your video . My idea to correct the pile up of magnet forces is to take the set up you have and set say 3 or more on a long bar with bearings on each end. This several individual wheels allows each to act independently of each others magnetic fields. Respectively Ray from Raymondslab
Hi Ray, thanks for stopping by and providing the input. I enjoy your channel and did this video partly to send more viewers your way, but also because I really enjoyed what you were doing with that setup. Keep doing great things!
taper your steel bigger on outer end that one curve it will allow close proximity to next gate w/o interference plus and upward taper will change effect again great job thanks
I LOVE these kinds of "magnet motor" presentations for their consistency . . . NONE of them work!
lol
Looks pretty cool. I'm surprised you didn't continue with several more gates.
Привет! Хороший эксперимент. Я смотрел некоторые видео Reymond lab и нигде не разглядел потенциал для того, чтобы можно было построить рабочий МД. Спасибо за подтверждение предположений.
力はある範囲内だけです。固定極を数多く縦列すると力が無くなるのが分かります。逆転は無理な話です。
thank you sir for the post
Thank you!
More gates with shielding between them so they can be closer might be worth a try.
Brother, I just came across your channel. I see you haven't uploaded in a while - it'd be really great to see more content from you as you create some excellent stuff!
I have been amazed at your experiments but have seen you have not put something on youtube in a bit of time. Could you be so kind and change that ?? So all of us on the channel can See Great Things come at us. Thanks a bunch and peace too. Good day.
Acum realizez că motorul magnetic al lui Muammer Yildiz are aproape aceeași configurație... La fel așezați magneții la 45 grade...bună idee... 👍
Bro, put you one these at the top of the gravity wheel to force the top one to fall faster. Boom, free energy haha
Awesome stuff.
Thanks.
Hey Motionmagnetics. Check out ZPMM on UA-cam. It appears they too are using a form of right angle magnetics. Just wish there were English subtitles. Keep up the good work!
Yes, I've seen videos of that design. They are using a similar method of angling the magnetic fields through metal. Thanks!
What if you put the gates on the stator instead of the rotors?
do you think the friction in the center point plays a role in slowing down the whole system, losing the propulsion that the magnets are generating? maybe if you were to use greased ball bearings or something with less friction it would work better?
Maybe linear to highspeed...unpowered curve then linear again...(oval track). Personally i like idea of 2 strong spiral gates with added striking devices for kinetic energy rebound thru gates. 2 billiard balls smacking each other thru the gate repeatedly...each wheel takes a turn goin arnd.. Your video is thought provoking, tho. Thanks
You should use shielding metal to lower the resistance of approching magnets. ;)
Probably would help.
interesting. what happens if you combine a vertical L gate with a horizontal(as shown) ? in other words if each side consists of 2 L's @ 90 degrees, one vertical & one horizontal, 4 sets of magnets & 2 opposite L's per side......obviously they wouldn't fit together nicely as is.....but you could use rods instead with a perhaps just a flat section for the magnets mount, instead of bars.
Most likely it would create a stronger area of repulsion that the rotor would need to get through, which might negate any potential gain.
Even it this won’t run itself, you could use it to enhance efficiency of a device
keep on , your work deserve to be respected
Y your linear stator have diff arrangement with ur rotary..
Love your stuff but let me give you something to ponder. Gyroscope... the same physics that drive them is fighting the gate. This is why it works linearly but not rotationally. It pushes across not through.
should have enrolled on a course in electrical engineering so you wouldn't have to embarrass yourself on UA-cam with "Look I just discovered something that has been taught for the last 100 years" videos.
Are you anywhere near Maryland?
HI THERE... IM FROM INDONESIA N I HAVE OVERCOME THOSE STICKY SPOT IN MAGNETIC GATE. HOW TO CONTACT U ????
I have a question about this setup. What would happen if you used a halbach array to increase the magnetic field in either the moving magnet or the steel plate assembly? I would love to see someone experiment with that. Sadly I don't have the resources to get magnets currently otherwise I would totally do it myself.
My guess is that it would cog, but you might want to give it a try? You never know.
have you tested it with 3 staters?
Hi Sunshine, with both the rotary an gate have you ever used the Fibonacci spiral as a pattern to follow. Enjoy peace an happiness while manifesting the light an love of life.
No, I haven't tried that. Nice suggestion though. Thanks.
You can try Aluminium and steel.
The could we do with these gates?
I can't help but think about steel as magnetic shielding between 2 like polls. Make more of A u shaped Piece Instead of V and put a piece of steel from between the like Poles at the other end to extend the field further.I wish I could send you a picture
Keiththomas524 at yahoo get ahold of me so i can send some brain waves your way. There may be something to it!!
hey Motionmagnetics, as you see the technic is based on that triangle-ish shaped steel plating, I recommend you and Ramond use arcs, of neodymium, it will be much smoother and faster.
good structured video as always, however I don't understand why you are using new other technics, other than, applicating the good old HoJo technics, you are so long busy with liniar things, get to the rotor with the assymetrical distances and the gate, the pmmg4hybrid liniar motor, but make it rotory, I know you can do it!
kind regards
Benjamin Moszkowicz
I learned from Howard Johnson that the best way to start is to work out most of your problems with a linear version of a magnetic motor before attempting to build a rotary version. The pmmg4hybrid version of Johnson's gate won't work in a rotary version. The repulsion at the entrance to the track negates any possible gain. So a rotary version simply stops past each gate. I'll work it out eventually though. Thanks!
Motionmagnetics alright!😅
Motionmagnetics though a round train track circuit would make it possible as you can assign the magnets to the places where the track is straight, maybe something to think about?
I've thought about that. I've even considered designing the gates along a flat train track and attempting to build up enough motive force to go around an area of round track that would lead right back into another series of flat track gates.
Motionmagnetics exactly, and did you realize it or just considered it? Because that has to work I 🤔 think
Try levitating in the center
That's a thought.
shielding between the gates so you can havea lot of htem?
Please use spell checker Sir. Thanks
add a flywheel so it can continue to rotate to the next magnet?
Possibly? But that also increases the amount of force required to start the rotor.
@@Motionmagnetics if with the help of the flywheel this becomes self sustaining, it wont matter?
have you looked at ken wheelers work on magnetism?
If he had, he would know he is fighting a losing battle with pure magnetic motor designs.
it slows down too fast after the gate so something is making it slow. try using this Halbach Array with it ua-cam.com/video/Ak06g3GVHuc/v-deo.html also try getting a veru high speed before re entering the gate
stack vertical.
Perhaps.
Doesn't seem to work at all.
...
🟦..... I'll check back with yuh when yuh got it Spin'n!.... Good-Luck on your journey!