Це відео не доступне.
Перепрошуємо.
BRAUM RACING SEATS ARE FINALLY IN! How to install Braum Racing Seats and what you'll need!
Вставка
- Опубліковано 31 тра 2020
- In this video you'll learn everything you'll need to install a pair of braum racing seats yourself from the comfort of your own garage! I'll show you parts needed to order from outside sources due to height of seats, tell you about what you'll need to fix the seat belt chirp and show you step by step how to mount the seats on the brackets! I hope this video helps some of you make the decision to pull the trigger on a pair of your own braum racing seats because let me tell you.. THESE SEATS ROCK!
Whats up guys! I know this is kind of a long one but it's necessary for those wanting to install these seats! Give it a thumbs up and let me know what you think of the seats!
Do you have the information for the adjustable brackets
Man love those seats bro. Truly a beast of ride.
The seats are Awesome 💯, do a rear seat delete with small holes in the center for better sound. It's amazing how much you clean your car, junk always ends up under the seats, what the hell, lol. If you take your car to your tuner he can get the light off, your car had a air bag or two in each seat correct ?? Great video brother, it will look Awesome with the seat belt harness bar, it also makes it look so much better in the car💯💪👍🏁🇺🇸
Those seats are gorgeous!!
Please could you provide the link to the height adjusters? I'd really appreciate it. Thank you
Whered you get the adjustable brackets. I cant find any like that anywhere
This interior looks unbelievable.
The car looks awesome. I wished my destroyer grey scat pack looked like that.
Nice vid bro and also as a note u can turn the seatbelt chime off with just a sequence of pushing the red seat belt tab in and out a few times I've done this with mine about 4 years ago haven't heard that seat belt chime sense
Bro. your seats look amazing!!
Good content! I know Kirkey makes a good lightweight racing seat, I think it only weighs 17 lbs, but may not be as comfortable as the Braums.
what brackets are the ones from summit?
You should have a local upholstery shop make a cover for the back seat area that matches the front floor mats. Just hold in with velcro.
Seats are nice for street but should maybe get a fixed bucket if you intend on racing a lot. Also you can get side mount brackets that are more rigid and offer tons of adjustability. Also you might want to get rid of the duck bill spoiler as it will just slow you down. I have a Downforce Solutions duck bill on my hellcat but I bought.it that way.My future plans are a carbon fiber trunk lid with no spoiler in the future. If you do use a spoiler the newer redeye version would be the way to go. That exhaust sounds really good. I've got the Borla AtAk with offroad mids and it is crazy loud at this point.
Yo great vid and great job on being the best mopar UA-camr. And thanks for the insta follow
Looking real Nice 👌
I love the look of the Terminator the new seats give the car so
Much street credit
do you have a part number for that bracket you said you need two of ? i cant find that damn thing anywhere lol
They look good!
TNK SR 200 seat riser from summit racing. Made by Tanks
With the seat on the low level, are they lower then factory seat. I am 6’9, I would like to get a challenger with sunroof, but with regular seat it is a bit low on the top.
Any help would help. Trying to gain 1-2 inches.
What brand are the seat adjusters?
How much did the seats and brackets cost total?
Love all your videos. Which Chin Lip Spoiler did you add on to yours and where did you purchase it at? I keep looking for a really good looking one matte carbon fiber one, haven't found one yet though.
Most of the time you have to install a resistor across the pins for the airbag connection. IDK what it would be in the Dodge. Also you may have to reset the airbag code afterwards. It should less then a 20 dollar fix for the parts.
How tall are the seats themselves and with the bracket
yo hows your car on gas, whats your mpg looking like? and how do you think it is gas wise compared to a 5.7?
Do you happen to have the link for the adjustable brackets for the height or have the name for them?
They look good in it man, and really like the custom floor mats a lot to. In fact I wouldn't mind a set for my Challenger, and might be looking them up. I wonder what the wt difference is of the seats with hardware and motor, vs the Braum's and their brackets. They would be great for me because it's not a daily and do not take it on long trips, but imagine that they wouldn't be very comfortable for a lot of miles and would be great for wt savings though. Although I'm in the process of buying drag radials for it now, so it will be a while before I do and am also reducing the size of rim and going with 17s. So I will be getting all new tires and wheels, and am excited about it. I decided to go 17s because they're a lot easier to find tires for it that I like, and think that I will get sticky Mickey 315s. So l should be able to finally hook then, and will be nice. It's got 295s on it now, but they are 22s and have got to go. They were on it when I bought it, so they weren't my choice and will be glad to finally get rid of them. Was kinda worried about wheel gap, so that's why I'm going to order them in an aspect ratio of 45 or 50 and should be fat enough to fill in the back pretty good. I'm ordering skinnies for the front, so I'm not too worried about that and should be good
You didn't mention or link where you got the seat height adjuster brackets...Saw several people ask with not reply. Link please thanks.
Can you provide links to the products, especially the adjustable brackets?
Could you use oem seatbelt with those seats?
So are you not able to use stock seatbelts with those seats????
About to order for my Porsche Cayenne
Sold buy that back seat delete kit
Rear seat delete with a hole for the sound to come through and to peek the air tank.
Those seats are for a guy who wants to be sporty yet luxurious
What's wrong with the factory dodge seats? They are amazing!
Never been a fan of most oem seats.
No they're not lol, they're fat, heavy, have the annoying airbag in them and just ugly. Custom is always the way to go
@@miloshzekan4989 Truuuuu so much weight in the oems.
The oem seats are horrible.
You need a resistor for your airbag light.
And I prefer longer vids
🔥🔥🔥🔥🔥
What colour is ur car ??
Can't you take it to your mechanic have him reprogram the computer or pull the fuse?
Straight pipe your Challenger
I told him, says would be way too loud lol
Milosh Zekan ya true but he could put flow master super 10s on there or something
@@tangycale2735 I've got Longtube headers and AWE Track exhaust coming!
Thank you for this video! Exact seats I’m going with! Btw I done the rear seat delete kit in mine and I love it no added weight to worry about they are very light. Btw I found a diagram for what you need to minus the airbag light! Dm me on Instagram and I’ll send you the picture boosted_rt13
Did terminator help snag your girlfriend? 😂