Це відео не доступне.
Перепрошуємо.
XTool S1 40W Laser: First Engrave, Score and Cut for Beginners
Вставка
- Опубліковано 7 сер 2024
- First Laser Cut on xTool S1 40W and 20W Laser | Silhouette School Blog 😍 Step by step first laser cut, score and engrave with xTool S1 for beginners 🔥 Exclusive XTool S1 Laser Bundles: shrsl.com/4a1ey
MORE INFO and IMPORTANT LINKS!👇
Looking for more XTool S1, P2, and M1 Laser videos and tutorials? You can find them all here 👉 • XTool, Glowforge & Las...
🎥 Full Getting Started with xTool S1 Playlist: • xTool S1 Lasers (40W a...
Recommended XTool S1 Bundles (Get What You Need, Skip What You Don't)
👉 Basic XTool S1 40W Laser Bundle: shrsl.com/4a1fc
😍 XTool S1 40W with Everything Laser Bundle: shrsl.com/4a39v
Shop All xTool S1 Laser Bundles and Accessories: shrsl.com/4a1ey
📦 The base Xtool S1 Laser Engraver includes the following in the box:
20w or 40w Laser Engraver and Cutting Machine
Xtool Creative Space Software
Power Cords
USB
Filter Tubing and Connection
Sample Material Pack
Tool Kit
Do I Need Air Assist for xTool S1? 🎥 • XTool S1 Air Assist an...
Shop Air Assist for S1: shrsl.com/4a1fg
✅ Best Commercial Use Laser Designs and Images for xTool: sofontsy.com/pages/search-res...
🎥 Looking for more EDITED videos from start to finish for your craft hobby or small handmade business? 🎥 How about 1:1 help? WE HAVE THAT TOO at Silhouette U!! 👇 Start Today
silhouetteu.com/pages/silhoue...
🎥 SUBSCRIBE TO OUR UA-cam CHANNEL! It really helps us bring you more craft tutorials!! 👉 / @silhouetteschool
#xtoolS140wlaser #xtoolS1laser #xtoolS1firstproject
#xtoolS1 #xtools1setup #CO2Laserengraver #xtools1laser #bestcraftlaserengrave #laser #bestlaserfosmallbusiness #xtoolS1unboxing #craftlaserengraver #silhouetteschool #howto #business #engravingbusiness #etsybusiness #cricut #silhouettecameo #heatpress #silhouettebusiness
00:00 Introduction: First Project with xTool S1 40w Laser
00:14 How is xTool S1 Different than M1, P2, D1?
00:55 Why xTool S1 Air Assist and Honeycomb Are Worth It
01:18 How to Use xTool S1 Honeycomb Tray
02:28 How to Connect xTool S1 to Creative Space
03:21 Moving the Base Point on xTool S1 Laser
03:40 Best First Project for xTool S1 40W Laser Beginners
04:44 Setting Engrave, Score and Cut Lines in Creative Space
05:35 How to Pick Material to Laser Cut in Software
06:33 How to Auto Measure Material Thickness on xTool S1
07:03 Why Is xTool Not Cutting Design?
08:14 What is Framing on xTool?
08:59 How to Send a Design to Laser Cut on xTool
10:20 How to Stop Wood Charring on xTool
11:26 First xTool S1 Project
12:13 More Laser Tutorials and Help with xTool Lasers
Thank you for this video.
Thank you for this video!!! I was getting so frustrated with trying to line up my project to cut, and being off.
I enjoyed following this video but please can you tell me how you knew which speed and power settings to use for your material?
I am curious - why didn't you use the Pin-point Positioning?
hi there! This was helpful! But Im still getting burnt edges around the wood and the cutting and scoring is not clean. I have the riser base installed and I am wondering if this is the reason why I am still getting char around the wood? Do you think I should remove the riser base?
I do have honeycomb and air assist on.
When changing the material from “reference” to the actual material, did you already have all the different materials available in the drop-down menu? I only see “Reference” and “Manual Setting” as options. Thank you!
Yes I did have some. For some reason xTool did not pre load any material settings in the software for the S1. I have no idea why b/c there are some for the M1 and P2.
Thank you for this. I do not have a tool bar like you? Where is it? Also im struggling to connect. It did at 1st, but now its not connected. Im desperate to do my 1st project. What am i doing wrong?
Hi @gaynorpoole3613, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
What do you have your laser on?
It's on a desk
Unless xTool changed it, you are supposed to position the honeycomb all the way down (not up) in the right hand corner.