The Adventurer 5M Pro can print with TPU filament
Вставка
- Опубліковано 8 лис 2023
- AD5M Pro： www.flashforgeshop.com/produc...
Filament: www.flashforgeshop.com/catego...
#3dprinting #3dprinter #tpu #flashforge #adventurer5mpro #shorts - Наука та технологія
Having the same issue with 95A where it is barely coming out of the nozzle
Hi, please try with a 0.6 mm nozzle
AD5M Pro： www.flashforgeshop.com/product/adventurer-5m-pro-3d-printer?cID=31
Can Flashforge Adventurer 5m print tpa?
Tpu,
CanFlashforge Adventurer 5M print tpu?
My 5m pro prints tpu really well. Would love this file though
Glad you like it!
TPU on a Bowden system sounds like a gamble to me.
We have printed models with TPU and they are good.
Hello, I own TWO adventure 5m pros and can’t print TPU on either of them. The filament just slips inside the extruder gears. The only way I can get either one to print TPU is if I hand feed the filament into the Bowden tube myself and help it along.. any slight tension on TPU filament instantly causes it to slip in thr extruder and not come out. I need help!
PS. I have printed every other common type of filament with out issues with my machines. Even carbon fiber and nylon.. so what am I doing wrong with TPU?
Hi, please contact support@flashforge.com
Same here, it loads just fine and starts out the print fine too, but after the first few layers it clogs and stops working entirely, maybe need to change some retraction settings or something
@@flashforge3d It would be great for a public response, I'm thinking about trying TPU and any information about possible issues would be beneficial to me rather than having to email your team when it could be advised here, I own the 5M and very happy at the moment, though I'll not be buying any TPU just yet.
@@BiffsEquipmentнужна правильная твердость материала по шёру не ниже 95а
Nice, what speed are you printing tpu?
And, can you print softer tpu?
Hi, I'm not sure about the exact speed settings I used, but you can try printing TPU at a slower speed for better results.
It can't even print 95a tpu while my other half price printer can
Hi, it can print tpu 95A, please watch this video: ua-cam.com/users/shortsYrxHmee5YN8
@@flashforge3d No, I have a adventurer 5m pro. It can't even load tpu 95a. But it prints other materials perfect
Hi, which brand of filament is it? If it can't be loaded in, you can use a tool to squeeze the old filament out and then load the TPU 95A. It may be that the old filament is stuck in the nozzle. The TPU 95A is too soft and cannot be pushed.
この設定が知りたい
Is it ok to use sting3d 64d tpu fila?? Using 0.4mm nozzle
Hi, please contact support@flashforge.com
i am trying to print Geetech TPU but it fails every time, there are no presets in Flashprint for tpu on 5m pro. what setting do I use thanks
good comment sorrento thinking the same thing
Hi, the presets will be available next Wednesday.
thanks
the settings for TPU were not in flashprint 5.8.3 .... cmon you have them for my Dreamer NX
@@sorrento8156 Hi, please change the nozzle to 0.6 mm in Flashprint, then you can see the settings for TPU
Just bought a 5m base, can i print TPU just as well?
Yes, AD5M can print TPU too
5M can't even load the A75 TPU.
А95 грузит
@@airo9926 95й любой принтер сможет, даже с фидером MK8.
Hello Flashforge. How can I remove the Ptfe Tube at the backside of the printer and the one to the extruder?
Hi, please tell me your contact information, I'll send you the video
@@flashforge3dI tryed this over your support email. They don’t understand what I mean by „remove/exchange the ptfe tube“ They send me a docx„stuck nozzle“! Please upload it here. Best regards
@@petermarkk1408 Hi, you can check the video ua-cam.com/video/Sbv6Jc8z1J4/v-deo.html
@@flashforge3dyes, that is what i’m looking for! Thank you very much! 👍
@@petermarkk1408 You're welcome! I'm so happy that I could help you😆
can i print 83a esun tpe with 5m pro ?
Hi, you can try with 0.6 mm nozzle
can you print carbon fiber filament with 0.4 nozzle?
Hi, it is recommended to use 0.6 or 0.8 nozzles to print carbon fiber
@@flashforge3dwhere i can buy them?
@@andryalemira8827 www.flashforgeshop.com/product/0-4-mm-nozzle-kit-for-adventurer-5m-series?cID=31
А 95 не показатель, с ним все директы справляются, как на счет а 75?
Он не может печатать TPU 75
@@flashforge3dа TPU 85A?