Nerf Mod: 3D Printed Revolver SHOTGUN!
Вставка
- Опубліковано 21 жов 2024
- A 3d printed drain blaster revolver turret. I have several iterations and versions that can fire Rival HIR's, Elite darts of all kinds, Mega and BoomCo.
Drain blaster on amazon:
amzn.to/2jRLITJ
Out of Darts, run by Luke Goodman is a one-stop Nerf modding shop. We carry all the supplies, tool accessories to make your modding journey easier! Check out our site below for guides, build lists and resources.
Please subscribe for more!
tinyurl.com/jnu...
My web store:
www.outofdarts...
Follow me on Instagram for sneak peeks:
/ outofdarts
Tubing on McMaster:
www.mcmaster.c...
.53" for Elite
.79" for Mega
.93" for Rival (will also shoot mega)
1.09" for HIRricane tubing (NOT DRAIN BLASTER)
YES PLEASE MAKE THESE AVAILABLE FOR PURCHASE!!!
Have you considered a muzzle setup that is several mount/attachment points for your Little Rocket barrels?
You could then switch out any of the barrels at will. (Though some of the bigger ones might protrude into neighboring barrel spaces.) I think that would be a bit slower to swap/reload, but would allow for even more modularity. (Not certain if that's a word, but it fits.)
I'm picturing using the inline clip barrels as shotguns. I've done this with the Little Rocket adapters mounted on an old Supermaxx 1500, though it is, of course, a lot lower-powered. With the additional punch you get from the Drain Blaster, it should work much better.
You could even make a Rival inline clip-type barrel, or a longer "regular" inline clip barrel for it. (Unless you already tried that and it didn't work.)
Looks like such a fun mod! And it's modular! Who wouldn't love that?
You might want to make a version of the coupler piece that allows for attachment to nerf rails. I see many people wanting to integrate this as an underslung shotgun on blasters. The rail attachment would just make doing that faster and easier.
just gotta say your mods and blasters are innovative designs of concepts people have been thinking of. Maybe I'm just uninformed, but still pretty cool.
you should talk to captain Xavier, mayber work on a project together
+Outof Darts I'm a massive fan of both of your drain blaster magic
Jamie Tus Jjfuhjh02mfj t52735028rn jh jfrj. rnmmne. nmmmkfjjdgdkv
but will it take it
I would love to see an attachment that has a hopper or RSCB as one of the barrels. That way you could have both long range and short range in one secondary.
PUT IT ON ETSY! PLEASE!
RZ Rider YASSSS
Not bad at all! I am fairly sure that the drain blaster doesn't have an OPV, but a burst disk. A simple and useful mod is to replace the burst disk with a 1/4 inch fitting and then install a proper OPV. You can get PRV's off ebay anywhere from 20 to 140 PSI and then you can regulate how much power you want -R
You sir, deserve a million subs
For the barrel connection you could try some type of latch system that snaps around the side but still allows for rotation and removal.
+Outof darts this is extremely impressive. I think dare I say it that you are on your way to revolutionizing the drain blaster.
I would definitely be interested in the attachments if/when you put them into production.
This has me so excited. I would love to see kits of this in your Etsy store.
Were the 3d files ever released for this??
As for slinging it on your back my impulse is to measure a strap out such that it is in a comfortable firing position first, then fold that strap until the blaster is affixed tightly to your body and then pulling it to rotate the blast to your back. This would require a two point sling, ideally fixed to the rear of the blaster and the front of the barrel. Thus, removing whatever you have fastening the fold of the strap immediately releases all the slack in the blaster which should drop it essentially behind you hips and allowing you to simply adjust the strap with your off hand to bring it within range of primary hand.
Just found this video and it is exactly what I was thinking about prototyping but operating a bit differently
Oh, no....
I cant wait to see it at the Nerf Wars. Good job.
I'm definitely interested in purchasing a finalized version of this design.
I can imagine BoomCo being the hardest to design for by far. Good luck
will you sell these as kits eventually
So here's a simple idea. Put a lip on the inside end of the barrel. And a guide tab on the top or bottom of the pump and a spring latch on the other side. Quick disconnect and still keeps it modular.
Hey +Outof Darts, try using some proto-putty or sugru for a rubber seal.(proto putty can be quite messy and you have to make it yourself). If you want to, a foregrip might help stabilize the blaster and make it a little more like a shotgun.
Your yard/landscaping looks amazing!
Noice. :3
-Justin
Make.Test.Battle I dare you to single that and take it to a war >:) (if you do that incredibly dangerous thing please say in the video that I suggested it)
OMG, best shotgun ever.... would definitely like to buy one from your shop, particularly if the whole barrel assembly could be swapped for reloading. you put the special in special weapons.
have you not ever looked into using HPA to power a blaster? If you could come up with a blaster that uses the PolarStar airsoft fusion engine that would be killer. Give me an HPA semi auto blaster that uses rival rounds and using the fusion engine being able to have select fire would be amazing
is there a way to make the barrel attached just like childproof caps. or like barrels on bicycle, one way the rotate and another way to tight/loose.
I didn't know I needed this but now I have a mighty need.
When you say you found the smaller to be more powerful than the larger I would guess you have not come across the pango (largest tank, heavier gauge material, not burst disc or oprv, and a metal pump instead of plastic).
Not sure where to currently get that particular version. But I found an old Amazon link to it that shows the metal pump. amazon.co.uk
How soon until Hasbro steals this one from him?
fununcle I give it a month
Hasbro hates air blasters and doesn't like shotguns, so this one is probably safe.
Andrew Nagy They already stole one from him??
lols its not confirm if they have but the nerf reddit has a blaster called the nemesis thats pretty much a hirracane
wow. its actually nothing like a nemesis, i see how it was just being leaked back 5 months ago u couldve got them confused but they are nothing alike
That's great!!! Definitely put it in the shop!
what do you think about the new rival nemesis?
PS: whats the measurements of the pipes used with rival rounds?
Challenge: Make one with a single barrel. Attach a stock, and a scope. Instant sniper rifle. Also, try making it bolt/ breech loading. (Pull back bolt, load dart, close breech/bolt, fire!)
You have way too much fun with this...
nice... I like it... if I were lucky enough to get one I would like 3 attachments one for each type of Nerf Ammo
You're like the Grant Thompson of nerf
Perhaps single it just for the sake of seeing what performance you could get out of it, I would assume singled titan or titan esk performance
Well I'm gona order some drain blasters now
Sell theese
I'd recommend an airsoft shotgun scabbard to carry it. Or mount it under a barrel
You should have multiple barrels that you can swaps out for extra ammo
You should either make a air compressor, or an auto rotator
You need to show game footage!! Plz!!
hey, When will you have MTB motors back in stock on your ETSY page? or do you know where else I can buy them, or better motors I can buy?
This is very awesome, nice work!
More stuff with the drain blaster please!
when can I expect to see the 3D printed Artemis stock attachment piece on your store?
sweet
Outof Darts look up captain xavier you and him need share ideas
Wow an actual shotgun!
Hey man, any chance you could send me a link to that specific little drain blaster? Been meaning to pick up one for a build. It'd be nice to have that selection and testing process already taken care of!
Outof Darts awesome, thank you!
How much would it be if available for purchase?
Dude.... You NEED to collaborate with Captain Xavier. You need to.
Especially his modular, and very unique concepts. I believe that they would go perfectly with your 3D Printing and YOUR awesome ideas as well. ;)
would you ever sell the 3d peinted parts on your etsy?
Replace the pump with a larger dual action pump under the barrel.
What brand/model of drain blaster do you use?
Which Drain blaster is this?
Could you provide a link in the description?
EMonDaNexxus They are all pretty generic
You should do one with a compressor
Beginning of the video:
_Bye, I’m out of darts_
Pls sell them
Do you publish 3d printer files?
Whatever happened to this?
Do one for the demolished missle
Are you in CT?
Rip, i would never have guessed
Is this a product?
I want one
How would you use demolosher missiles
I’ve been blasted by the rival shotgun in Tacoma ..it’s
awesome
Would you be willing to sell your STL's?
It looks like a doom-sayer :D
"Keeps the balls in there" he says while dropping balls left and right.
Try to make it shoot the old discs
Please oh please sell me one when u get the final design.
I would buy one!
put a n-strike rail
What size tubing did you use
For the rival rounds
Where do you Nerf in California, do you hav a Nerf club
Outof Darts cool I'm trying to join nobacon
make a demolisher rocket attachment.
very cool
dude do it!!!!
We are very interested
I...... Want....... IT!!!!!!!!!!!!!!!!!!!!!
imagine it with a paint ball tank...
Rather than permanently attaching the cylinders you should put spring loaded lever retention clips on the left and right (or top and bottom) of the cylinder adapter. That way you could push cylinders into the adapter quickly, they'd mechanically lock on and you could remove them quickly by squeezing both levers.
(Similar to using a FROG CLIP.)
ua-cam.com/video/LukSAGSmDlg/v-deo.html
Retaining the ability to change cylinders quickly would be super cool.
This is a real cool project.
Who doesn't want a drain blaster from esty
Your awesome
Please give now
all those nubs in the front
Can I have
i just lost no nut november
Please make it shoot a rocket
Danng im early second comment. Nice build.
SECOND
First!
very cool