Fixing up Pioneers Laser Active console to run Sega Laserdiscs | Trash to Treasure
Вставка
- Опубліковано 7 чер 2024
- ● Support RMC on Patreon: / rmcretro
● Treat me to a Coffee with Ko-Fi: ko-fi.com/rmcretro
● MonsterJoysticks: monsterjoysticks.com/RMC
● 1ClickPrint: www.1clickprint.com#RMC
● Episode Links
Mark Fixes Stuff:
UA-cam: / markfixesstuff
Twitter: / markfixesstuff
Website: markfixesstuff.co.uk
● Cave Links
Twitter: / rmcretro
Instagram: / rmcretro
Discord: / discord
RMC Shop: www.etsy.com/shop/TheRMC
● Description
We continue our repairs on the Pioneer Laser Active today concentrating on the Sega PAC-S1. This add on lets us play Megadrive or Genesis games, MegaCD games and LaserDisc games. Can we fix it? Lets find out.
● Music
All music is used under license
Cold War Games - Gavin Luke
Morning Coffee - Magnus Ringblom
Rise of the Velcro - Gavin Luke
Sidney - Lukwaks
City Night Drive - Håkan Eriksson
Aiming High 5 - Martin Landh
Own the World 2 - Axel Ljung
● RMC Tool Shop - Find tools seen on the channel for your Cave here:
USA Shop | www.amazon.co.uk/shop/RMC
UK Shop | www.amazon.co.uk/shop/RMC - Наука та технологія
You got RickRoll by a CD+G disc that's some top tier level of trolling
and us as the viewers got RickRolled at the same time lol xD
Rick gets everywhere!
the game comes after the RR... that would be epic ;)
The corect response would have been something like "but then mark noticed there was another 400mb of data on the disc so we swopped the bios for version 1.7 and lo and behold there was taito's unreleased conversion of Airwolf" or some such nonsense and just left it at that.
That was probably the most sophisticated rickroll I've ever encountered.
I live in America; all my life, I've called in the "Sega Genesis".
Because I watch so many videos like yours, I've now been referring to it as the "Mega Drive" without realizing it.
Never have my friends been so confused.
bhahhaha.
I've lived in a bunch of countries, but they're all PAL territories, so it was always Mega Drive to me.
What I've run into since being online is the opposite problem.
Most of the people that bring up the system exclusively talk about 'Genesis' this and 'Genesis' that.
It's hard not to get confused, and I keep ending up writing stuff like Mega Drive/Genesis because if it, even though that's really tedious and clunky. XD
And all of that mess solely because Mega Drive was a pre-existing trademark in the US... XD
Not the only time that problem has shown up.
Starfox became Lylat wars in Europe for exactly the same underlying reason...
But it's still awkward whenever that happens.
Every hero has a MegaDrive...
A good result. Thanks for having me in the cave and nice to see a realistic video on youtube about how these repairs go.
But Mark with a K wasnt there on the first day Ahhhh You're a Wizard Marky and a thumpin good one too now you've been trained up a little
@@ThePobolycwm I was present via Discord on day one :P
Mark you are the man
Love that this was posted a week ago and I just got this in my list today. :)
@@ChrisKewl hey Chris my videos go on early access to Patrons for a week before public release so that's why there are older comments 🖒
Superb work, Bastian.
Thank you for watching, and a special thanks for Mark Fixes Stuff (ua-cam.com/users/markfixesstuff) who returns to tackle the beast that is the Laser Active with me. Today we saw that everything doesn't always go to plan, and techniques can get ugly, but providing we end up with a working system without damage caused by our methods then it's a good result. We'll explore more techniques in Part 3 including the use of solder paste and "chip quik" as we repair the PC Engine PAC. Neil - RMC
The all important links!
● Patreon: www.patreon.com/RetroManCave
● MonsterJoysticks: monsterjoysticks.com/RMC
● 1ClickPrint: www.1clickprint.com#retromancave
Nowe we just need to find a way to connect the Sega 32X to this beast! :) :D
A cartridge slot extender should do the job.
I find these types of videos very valuable because it shows surface mount component n00bs like me the types of things that can go wrong when working on a project like this, and the approaches you can use to fix them. It was a daunting task, but Brits truly keep a stiff upper lip and soldier on. Excellent work!
Bastion playing the long haul game haha love it.
Great video 👏
Excellent video as always. I love seeing you fix these old gems.
He also makes good coffee.
Lovely, lovely video. Maximum respect to you and Mark!
Your commitment to the Trash to Treasure series is increasing and highly commendable. Excellent work, I'm glued (soldered even), to your channel. Keep it up :)
Thank you Simon, we're in too deep with this one to go back now!
Ahhh Simon.... IC what you did there.
entertaining video and first time I ever heard of this device...always fun watching these restoration videos and getting to see what makes old technology tick
When you work on this machine you get the impression that they had NO restriction on build cost at all.
These videos are pretty inspiring for me. Thanks for sharing this sort of work!
My pleasure, thanks for watching
Excellent episode. I really, really love Trash to Treasure, and Laser Active is an amazing piece of hardware. Waiting for part 3.
Awesome video! I’ve watched a few and have now subscribed. I look forward to seeing more.
Must be a great feeling to restore an old piece of hardware like this. Have followed your videos through the whole process, I don't know much about hardware repair, soldering, etc but it has been interesting to watch the techniques used and overall progress made along the way. The rick roll at the end was hilarious too haha. Well done :)
Excellent work. I won't fault you for snipping those caps...I know there are many that frown on that method but if you are careful and the snips are on point, it's a safe method for removal. I've used that low heat Chip Quik solder...it's a miracle from heaven. Pulling J-lead chips without an airvac was nightmarish...with that stuff virtually any non-BGA style chip can be removed with little difficulty. I don't know if it's something i'd have used on this project, but it's definitely something handy to have in the soldering arsonal. Very entertaining and informative stuff sir!
The score and editing is super fine. That synth intro massaged my bong resin buzz.
I am genuinly impressed :) I watched the past episode where you made the previous repair and wow....
Wow, man. This was an excellent series to watch. I would have thought it was hopeless to repair this thing. So glad you guys persevered because the result was awesome! This would definitely be a permanent fixture on my entertainment center :-)
Well done guys, amazing amount of work and well worth it to restore this system :)
Great work guys. Good to see this got saved just in time.
Another awesome episode superb fix
Now everyone knows how painful surface mounted caps really are. Nice work.
@@primus711 Exactly. I hate people telling me how through hole is easier to work with. This is especially true when you have some multi layered boards with large ground planes.
One tip for installing them though - add regular solder with a soldering iron, add some flux, then apply heat with a hot air gun, after a while just slide the new cap onto the pad and you are done. This works especially well when you have some really small caps (like 0402) clustered close together. Solder paste of course works too, but can be a bit annoying to apply (though this is not a problem for large pads such as these).
Quality content as always. Cheers mate from PHL to the cave.
Cheers!
Another great video, and I loved the explanation of all the chips. Ohhhh.....
Love that dramatic intro.
What a quality machine this would have been to own on release, shame it cost a fortune! Well done with the restoration.
Amazing! very professional cleaning!
Wow, that is one of the toys I would love to own . You sure have an excellent collection.
Fantastic job with this video. If I ever get one of these PACs for my Laseractive I'm hoping to find one that's had work done already, but worst case scenario this will serve as a good guide.
Two pieces of advice:
1) Get a board preheater to reduce dwell times with the hot air. You soak the board, ground plane and all, in heat that’s well below the danger zone but still drastically reduces how much heat is lost to the thermal mass of the board and surrounding components. You point the nozzle at the component and, since it was already half-way there, it melts much quicker. The problematic board likely had additional layers inside for power and ground planes, which is why it sinks more heat.
2) If you are going to hand-solder without paste, only load one pad with solder. Next, flux the capacitors and/or pads and position the caps near the pads. Introduce heat to the one pad that has solder on it and move the capacitor into it until it the opposite leg is centered and flat on the pad that has no solder. Hold it flat after removing heat from the solder side. Once stable, you can easily solder the other side without worrying about alignment. To flux the surface mount caps I stick mine to the upside-down lid of my tub of gel flux. It works perfectly!
It's so nice that they labeled the silkscreen so thoroughly. You aren't always so lucky and it makes things so much easier not needing to refer back to diagrams or try to find the labeled images of the boards.
very nice video, nice work recapping those boards!!
Cheers Terry
Thank you for reinstatement!.
I am impressed in a corner of Japan.
Mark and you make a great team. Give us some more joint force stuff fixing videos!
Great video Gents. So much information.
2019 is going great guns. Keep them coming.
Thanks Wiggy! It's amazing what a Christmas break does for production. I should take more holidays :D
Nice work!
Great video. The LaserActive has long been a holy grail of mine. I got to play on one 3 years ago at a convention, but it wasn't for sale (and would have cost an organ if it had been). Maybe one day I'll run across one at a yard sale or buried in a corner of a flea market.
I love these repairs on odd hardware
With all this pacs and different systems it's like when characters from different TV series "crossover".
Nice to see it working.
Awesome video! Love it !
Great work! Thanks
Great video as always. Long live the cave
Cave4lyfe yo!
(or something)
Another fine video! Sooooo many caps!!! 😳
Awesome video as always
GameTechUS did a series of videos on these expansion packs for the LaserActive, he stated how the type of capacitor has no bearing on performance, he used standard ceramic capacitors which guarantees it a much longer life span compared to the electrolytic ones. Would be worth exploring this for the PC Engine pack!
Good thing that machine found you guys to bring it back to life! A cool machine, perhaps not for the average Mega Drive enthusiast. I wish there was a Mega CD and 32x built into that new Analogue SG machine that is coming soon.
The mainboard might be a 4-layer board, you made the right call using the snips. Modern PC motherboards are like this, and they require the largest soldering iron tips and the highest temperature setting to get anything done. The "professional" procedure with those is to use an expensive temperature-controlled hotplate, but this works just as well.
Typically you will use an infrared PCB preheater to heat the underside of the board to around 100°C while desoldering. While not cheap you can get decent models for a few hundred dollars these days, depending upon how large a unit you require. A hobbyist level alternative is to bake the entire PCB in an oven for awhile to heat the entire board to 70-100°C and then quickly desolder components while it is still hot, periodically reheating the board as necessary.
Another great video, Neil. Already mentioned my own past with LaseActive in another video so I won't repeat it here. Anyway, I hope you didn't get copyright claimed for that last bit.
Very informative video, thank you Neil and Mark! No doubt a boring job, but I enjoyed the explanation on the capping methods.
Also, very much interested what this machine can do and its game specific catalogue so looking forward to the next videos! :D
Thanks Jef. A mundane job but it was all the more fun for doing it with Mark
Ahhhhh... thanks@@RMCRetro and Jef
!
4:20 taking the extra time to insulate components when using a hot air gun is Always worthwhile. It's cheap insurance, costs almost nothing and takes very little time. Making a little aluminum foil A frame to just move around the board as you go works well to protect the innocent as well.
so worth it to fix that up man if i wouldve had something like that growing up oh man !
Love this Machine right behind the Wondermega 1.0
Hey maybe you can help me out, I've got this RDI Halcyon system that needs a recap and...guys? Guys? Where are you going?
Those "hard to take off" caps are most probably on large ground plane, which suck the heat away. Two solder irons, with fitting tips, to both legs at the same time. Or careful snipping, as you did, is the way to go. Of course, pre-heating and such also help, if one has the toys of such nature available 😜
Thanks Miika. I'm looking at pcb heaters, I'd be interested to see if they make the job much easier.
@@RMCRetro Never checked, what such things cost. Been using them at work, mostly what we called "under heater" which, as the name implies, blows warm air from underneath the pcb. And then a "hot plate", which is a heating plane, where you put the pcb to pre-heat it.
Hope you get the rest of this Pioneer Laser Player fixed soon.
Intresting kit,never envy replacing CAPs.
Another awesome video!
Your desolder gun works great as a replacement for the braided wire. PS: Great Video again!
Man I really dig your intros!
great video as usual ,DRAGONS LAIR on the cdi is arcade perfect using the FMV addon cartrige, as is CHAOS CONTROL , and other F-ull M-otion V-ideo,games i.e THE 7th GUEST, all on the philpis cd-i were the best versions!!
Nice job! One more LaserActive works in this world...
Ahhh, the old legendary Retro Rick Roll. Awesome xD
That is an awesome console. Seems a bit ahead of it's time. Kind of an omni-entertainment system like consoles today. Good work on getting it up and running, guys!
One thing you might want to take a look at- the Sega CD systems actually use an ML2016 rechargeable battery instead of the non-rechargeable CR2032 you replaced it with. You probably want to replace the CR2032 with an ML2032 before too long, as otherwise the console will be trying to charge the CR2032, leading to "interesting" results.
I'll triple check that thanks for the heads up
I was just going to say the same after watching the video. I had the same situation on a Dreamcast! I think there is a zener diode mod to stop current flowing back into the non-rechargeable battery. Love the vids :)
Great result guys well done.dont suppose you managed to aquire space ace for this by any chance?
No I haven't got that one. I have it for the CDi but would love some Don Bluth titles on their original LD format
I have a similar combo keyboard-trackpad device that I'm using on my TV PC, which I use for video viewing and console emulation.
The motherboard wasn't made in a different factory but had a different construction. Likely there were vias in or near the pads that wicked the heat away into the internal layers and got the PCB acting as a massive heat sink. I have seen this regularly with modern electronics where multiple micro-vias ensure excellent grounding but also make rework very tricky.
Cutting the caps was the correct thing to do.
Looks like a marathon session redoing all they caps. How many hours in total so far been spent recapping the laser disc and add-on pack?
Question I know the model1 sega cds and the sega cdx use rechargeable batteries, does the laser active? I haven't opened mine up yet if it you should really be using an lir not a cr battery
would love to see more gameplay in the future
Me too! I'm collecting some Laserdisc games to cover. You'll find me trying stuff out at twitch.tv/theretromancave and when I find something interesting I'll make a video on it
I have a question. I have one of the Laseractive with sega cart but it's been sitting on shelf for many years now. Would the cap have leaked by just sitting with no power?
Great video enough said.
Preheating the board uniformly to around 80-100°C (on a heated plate) will help alot, especially with large ground planes. You can then use a much lower temperature setting on the heat gun, or apply the heat for shorter periods, without any damage.
Thanks for the tip
As for the first video thanks for a very interesting and insightful 23 minutes tak and demonstration, even more for someone like me that have a Laseractive to repair! I just have one question though : do you have a link to the expensive pad kits you were referring to during the video ? I'm also on the "botched wire" team but I never though they was an alternative, even if not cheap. Cheers
I have a Denon Multi Disc Player I bought for 1000 dollars back in the early 90's. It plays all sorts of Discs. I have not used it in 15 years and its in mint condition.
Bastion wins the internet. Congratulations.
dude you rock
Jaguar on the Mega CD was my favourite racing game as a kid. There was a bug in the game where the cars performance would degrade after each race. I noticed it on one of the tracks where its so easy you don't need to brake, so you could get a consistent time trial run, but each subsequent race would always be slower than your first. Another weird useless bit of information I retained from my childhood.
Laserdisc! - there's a movie in there!
Prepare yourself, a review is incoming and it's not good
What hot air gun do you use and what soldering paste do you use?
This looks like a way easier way to remove smd components compared to a soldering iron and wick.
Thanks
Also fantastic repair video. I love the laseractive. Such a fun machine
That was awesome. Great job saving that Pak. If I remember correctly, that system can only output composite video. It's a shame if that is true. No RGB mods.
Unless you intercept the signals from the Pak itself? Then I would think the LD part may not function with the game?
I was having a really boring day at work until I start watching this, I'm half way through watching and now I'm having a really, really boring day at work..........................................only joking! Great content Mr. T, the Laser Active is a complicated beast! Wouldn't like to pick up that repair bill! :D
I had to think for a moment when you said IPA, I was wondering how beer could clean electronics
Beer doesn't clean devices, but it makes you care less if they are dirty.
@@MarkFixesStuff Hi mark
Hi there@@Power-Wiesel!
Man what was that, permanent solder, practically welded on? Sweet soundtrack in this episode. :D
Do you have a BOM list or shopping cart of the capacitors needed?
Getting the right capacitance is easy, but getting the correct case size is more of a challenge.
Check Console5.com they have a list and also packs you can buy. I use CPC or RS here in the UK
Such a great channel
Thanks Ned!
Just call me TeKK ;) You should cover the Vampire cards for the Amiga one day tbh. Again, keep up the great work.
@@tekk9995 I'm trying to get hold of one!
Great. Heard that there are some cards for the 500 out or being produced again. Not sure though. And then there is the V4 ofcourse which does not need original Amiga hardware. And they are working on an A1200 version as well.
How will the Mega SD go with the Laseractive I wonder? I doubt it will play the games out of the box but it might at least have the possibility of making them work with the SA-1 style functionality. It depends on the Megadrive’s video capability I guess
Wondering if someone uses the Rose's metal in the UK for desoldering purpose ?
Please re-cap/fix a busted Vectrex. Always wanted to see your particular filming style and quality of work applied to this machine. i think it would become the definitive video guide to it.
I greatly value your excellent advice and ability to film those really hard to get to places in very high quality. I would love to see the Vectrex get the RetroManCave love!
They make a small head for that heat gun you know. That might help so you’re applying heat to both sides at the same time. Your method works though snip it carefully lift off the plastic base
You any videos on replacing the bluray chip on a ps3 fatboy model
I used to have a simple Pioneer laserdisc player. It was pretty sweet. One day I put in a rented laserdisc that had sticky label residue. After the movie, I ejected the disc... and some little gear thing game out stuck to the residue. The player still seemed to work okay after that, so I don't know what that part did or how critical it was.
Haha we'll just pretend this never happened and movies magically continued to work
Sorry for the ignorant question. But how was the digital game encoded on the analogue LD media?
That's a good question and one I'm not in a position to answer right now... I think it deserves a little research and possibly a segment in a future episode, thank you
Maybe you should invest in a board pre-heater. I think it'd help when working on big boards like this.
Funny you should say that but I am actually looking to buy one in the next 30 minutes!
What is the pioneer chip inside the Mega drive /CD pac?
A small preheater would have made that job a lot easier. The massive ground plane floods were sapping all the heat.
Mark has one incoming, I'm waiting for his review before commiting.
I always use solder paste for anything 0805 or smaller.
epic intervention on an epic machine