Will it run? Sitting in the woods for years. A 65 Chevy C30!!!
Вставка
- Опубліковано 9 чер 2022
- I came upon this gem by luck since it wasn't listed for sale anywhere. I love the look, but will it run after sitting in the woods for years?
- Авто та транспорт
When taste testing fuel filters folks always have some fine Kentucky whiskey handy to handle the after taste..
Success-nicely done! I really like these will it start/resurrection videos!
Great restoration project. Your so blessed getting this old Iron running again. Thanks for sharing! 💯❤️
Great job getting her to fire up! 👍👍 That will make a very challenging, but very rewarding project for getting back on the road. Can't wait to see how she progresses😎
Thanks David! Yes, she needs a lot of work, but it would be so cool to drive.
That sure looks like a factory bed to me, I’ve seen, driven and worked on and even helped replace the wood floor on one of those. Chevrolet & GMC trucks factory beds were just like that
That would be awesome if that is a factory bed. Thanks for the tip.
The flatbed was a dealer install option when you purchased the chassis cab they didn't offer a regular bad on one ton trucks like modem trucks have
As a rule on those old trucks and cars if the numbers are all perfectly aligned that is original miles.
Great video! Your camera person does a fantastic job!
She sure does.
oh you got the good trk the one with the 4 spd manual trans
Recommend having a machine shop rework the head with stellite exhaust valves, hardened valve seats, and bronze valve guides so unleaded gasoline doesn't cause exhaust valve recession. That engine will be working very hard to move that big truck, so exhaust valve recession is highly likely on a mid 60's head like that!
Great job sir !! Can't wait for the up date 👍
Thank you!
Richard love looking at all your videos just started watching I
Thanks again!
Great video. I have many of these and going through the same with some “Will it run stuff”. Good work man!! Subscribed!!
Thank you! I will check out your channel!
Great job keeping that camera nice and steady camera man!
Wild. The float pin fix was brilliant!
Well, it worked, but there was a lot of luck involved.
Camara man not talking, what a pleasure !!
Come on, I love Christina’s commentary.
I love C30 and bigger!
I love that you save this thing.
Wish there was something around here, like that.
Thanks! I love this truck.
Greetings from Scotland. Just about to watch the video. Looking forward to it.
This looks a challenge…we shall see.
Cheers
Are you going to trailer it home ?
It would be interesting to see the before/ after video if you change the manifold gaskets . It would be a very cool truck once cleaned and made roadworthy.
Great job btw.
@@johnmontague4245 Thanks John, I am glad you liked it. I had thoughts of driving it home, but it is too rough. The rear u-joint is so bad it is ready to fall out, and the intake gasket is shot. The wide open exhaust doesn't help either!
Nicely done my friend gotta love the old Chevy’s
Thank you!
Good job glad it runs
The bypass hose indicates that the engine is a 292.
I have a '66 Suburban with the same engine, and I had it running easily after sitting for 30 years.
I love the 292.
Great find an old truck rebuilt motor reman master cylinder it was running sooner than you might think which is a score good luck with your new toy
Thanks! Three repairs to do right away. Carb, intake gasket, and rear u-joint. It should be driveable then.
Great work !
Thank you!
Yes sounds need light fix up then be running excellent also think motor should be 292 6 cylinder not 230 or 250 be to small for and that carb be Cater 450 to 650 CFM and hand choke cable knob dash hook or disconnected!
Staggered motor mounts would ID as 292.
6” side cover 292
4” side cover 230/250
Great info. Thank you.
Great save Richard, 60-66 was always my favorite Chevy truck style
Thanks Paul. Mine as well.
My favorite body styles as well
It is common for the230 and 250 engine block to crack internally the oil and coolant will mix together
Mines been doing that for 20 years. Everybody says it's normal. It don't use oil so I don't worry about it. Great video.
Great video of the 65
Thanks Luke!
Very cool great vid!!! 👍👍
Thank you for the support!
@@whattherust 👍🙂
awesome truck mate, need to get that gasket the go do some jobs with the trailer right away XD
Exactly. It has a very nice trailer hitch, which I plan to use a lot.
Nice work!
Thanks!
If the lifter covers are around 6 inches tall a 292 engine is what you have!
Thanks for the info. I believe that is what the truck has.
the patina on that truck is art. I'd buy it just for that. Also, wtf is it with the screens everywhere? Is it like, in your area, "honey, what do i do with this crappy old screen?" "Put on top the old dead truck on the back 40"
Funny stuff. I never did figure out how those screens got onto the red truck. That was over 8 feet up. How did they get there and why? I'll never know.
We own several of those 64 thru 66 trucks. I noticed a few things. the PCV is unhooked. That could be the cause of the moisture in the valve cover. Possibly the pinched vacuum line is supposed to be hooked to the vacuum advance? Thats a later exhaust & intake manifold. And there is a governor under the carb. Most likely a 250 cubic inch engine. We used a 64 chevy with a 250 and granny low 4 speed for several years as a wrecker. and the little six pulled several tremendious loads. and it did not guzzle fuel like the larger 292 sixes do.
That is good info, thank you. What do you mean by a governor under the carb?
@@whattherust Maybe to restrict rpms; I am thinking. Sort of like a rev limiter.
@@vayabroder729 Ah, OK, like a restricter plate. I did not see one, but I could have missed it.
I was surprised to see the 6 cylinder. My dad had one when I was a kid that had a factory 283
I have seen sixes even in a C60, but it was a 292. I expect the truck is going to be pretty slow.
As far as I remember you're not supposed to see much of his back in between the points do a big spark means you capacitors gone
that was fun to watch do you sell cars and trucks you fix ? cheers i wouyld buy that truck.
Yes, sometimes I buy them and get them roadworthy. Then they go up for sale.
gr8 job sir. 👍👍👍👍
Thanks!
My uncle and my first cousin both had '56 GM cars. My uncle's was a Buick and my cousin's was a Chevy. Surprisingly the keys for both were the same.
Years ago I had a worn out GM key, and it fit nearly every GM ignition I tried it in. I still use one like it.
a good B12 berriema's cleaning down the throat if it isn't the ignition system. Be fun to see
thank you for you're video
You are welcome. Thank you for watching.
Thats a 292 look how tall the push rod covers are the lower displacements blocks have a shorter stroke and block and the side covers are not as tall
Get her road ready
Sweet
and now we saw you going McGyver on a carburetor. :D what's next, fixing brakes with a ball point pen and three paper clips? XD
Thanks Lohar. I tend to take brakes more seriously.
I always run frame filters with no problem.
looks like a 292 am I correct ?
I am not certain. I was thinking a 230, but I am not clear on the external differences.
I KNOW YALL SAW THE CAMERA POINT AT THE WHITE BALL
Yup
Most Likely a 292, but could be a 230 or 235
You should use creaio oil to loosen up the carburetor.
Probably a 250 Cid it has an egr valve on it so 1973 or later engine
Could be a very cool and mean rig
Exactly. This thing oozes cool.
Hello Mr. Prague
Nice job. You bought this Yes? Is there other videos on this one
Be well
I did, but the deal fell through, so the truck is still sitting there.
Just curious. How
Hi there I drive a Datsun 1200 bakkie here in south Africa 1985 model
How late did Chevys run the straight sixes? I've watched your videos for a while and the latest year I've seen so far is 1972.
I am not sure, but it was well into the 70s at least.
@Prague Life, but you're right. There did come a time I simply stopped seeing them. I can't quite remember when that was.
Actually the larger straight 6 motors had more pulling power than the small block V8 but the V8 had much more torque. The Fords were the same way. I was in Romney West Virginia one time hauling apples for my dads store and loaded 100 bushels of apples and another gentleman loaded 80 bushels on a identical truck like dad’s he left ahead of me by a few minutes and I caught up with him on Cheat Mountain and passed him and a little later I had stopped for gas and he also stopped he asked me what motor was in dad’s truck and when I told him it was a 300 six cylinder he gave me a cussing and called me a liar because he knew I was loaded heavier and he had a 460 V8 the station attendant stepped up and told the guy to behave or leave and that it was a 6cyl because he had just checked the oil so I opened the hood and let him look. After he calmed down he asked what the gas mileage was and I told him 10 mpg loaded or empty it really didn’t care he flew mad again because his big old motor got 8 mpg at best empty
I was excited until I saw the Fram😭🤣
Right, that has got to go.
@@whattherust 🤣🤣
👍👍👍👍🤙🤘✌️
Definitely 73 or later with EGR
Just curious. What's wrong with those fram filters
The filter material inside is weak, and there is not enough of it. There is a video on UA-cam where some filters are cut apart to see how they are made, and the poor quality of the Fram is shocking.
Hi! If it is the org. eng. it has to be a 292 cid..
Remember that old Quaker State oil would collect moisture just like you see there....normal !!!
I remember my Dad never liked Quaker State. Maybe that is why?
looks like the spare tire was at the front of the truck passenger side looks like you set the air breather on top
I think you are right. There were tires all over the place, but that one looks correct.
If the side covers are high, its a 292.
Motormount in front of the fuel pump=a 292
I did not know that! Thanks for the info.
EGR valve in '65?
That is odd. Perhaps the manifold was replaced and a poor quality gasket was used.
Nobody in these videos is bright enough to check date codes on tires give ya an era especially when there R six tires
I use to have two of those trucks one time one a 1966 chevy c-20 and a second one a a 1961 the 66 had a 250 in line 6-cyl motor and the 61 had a 327 motor bother of the motors and trans out last the trucks my two trucks were rust buckets to far gone for me to fix
I don’t think Chevrolet offered a 327 until 1962 year models in 1961 it would have been a 283
@@johnbourgeois1414 The trick question for Mona Lisa Vito in court scene in My Cousin Vinny 🤣😂
That's a lot newer engine than the truck - those didn't have EGR til much later.
Right. I think the manifold was changed. I noticed a couple of the mounting bolts snapped off.
Where you finding all these vehicles
It varies. I find out about a lot through my youtube channel. The rest are word of mouth, Craigslist, and FB Marktplace.
Dealer installed bed.
Looks like a ford aluminum air cleaner
That is the parking brake
I have a question: I've been working on vehicles since back in 1949....I've NEVER heard of an Engine SKIPPING? What is that? Did You mean MISSING? Maybe?
Yes, same term. Growing up in the Northeast we called it skipping.
@@whattherust 0K
Skipping? How far north and east cuz I’ve been back and forth between Maryland and Connecticut my whole life and missing was always the term
If it's original it should be a 235 I believe.
Spend a few Bucks for a Boat Tank and a cheap Elec Fuel Pump and throw that funnel and milk bottle in the TRASH. You will get a lomger run time.
that was a ignorant comment exhaust manifold gasket will not cause it to run ragged like that more than likely stopped up exhaust to fix it get it unstopped or replace it
That motor was swapped . Has EGR valve . No EGR in 65...
Could be, or a manifold swap.
What's up
Looks more like a 250 though .
Congrats
Thanks! This one had me scratching my head for a while.
Hi
👍💪👍🇺🇸👁👁
It's always going to start it's not a old Ford or Dodge
I like your videos bud hey if you want if you want to sell that six cylinder I'll trade you a rebuilt 355 4 bolt main for it let me know I appreciate it I'll be interested
Sent you an email.
@@whattherust got it thank you
I like your videos but some things you say I do not like sorry
I don't know why this dude is going deep fake here. That is not the original engine for one thing it has a friggin EGR valve on the side of the carb plate. Having grown up around those trucks it woulda had the 348 in it or a 283 if it was a small block truck. The big block trucks were mostly a 454. I know folks say they had the 409. Wrong the 409s were mostly in the Impala cars. Some trucks in the south east USA were being sold with the truck version of the 396 which was more common and more commonly mistaken for a 409 motor considering they share similar features in the fleet trucks. Usually those trucks had gigantic fuel tanks is how U could tell if they had a big block engine in em some of the GM special orders had 2-3 fuel tanks on em like my Hump Back wrecker. That has a tank behind the seat and two saddle tanks on the outsides of the frame and it was factory like that not something anyone did to it. That has the original 348 motor in it. It is a 1965. The Hump back wreckers without the deep side boxes like mine R rare and that is because they had the gigantic fuel tanks. Most of the more common Hump Backs had shallow boxes on the drivers side because the fuel tank was there on the drivers side and deep boxes with no tank on the pass side...
No 454s in 65 and more than likely not even a 348. probably the biggest you got in a ton truck was a 327.you could get a 409 in a medium duty.
@@buckster2575 I have my dads 1965 with the 454 in it and it is c30 2wd drive dual rear wheels stake body. My dad bought it a year old off Westinghouse Electric company in Allentown Pa. I've had it since 1988. There are 2 other plumbing trucks here built in 1966 but titled as 1967 they have the 396 motors. If U want to talk powering the commercial versions of the heavy trucks as well as Blue Bird busses and the Pullman Hobbs versions busses all had the 327 & 348 motors according my GM history book here in my office. The 350 was being introduced in late 1967 and the trucks did not yet have the 350 until late 1968 according to the GM book I have... Occasionally the book is wrong. We had two near clone 1967 c10 pickups one had a 427 in it the other had the 327 motor but outside paint and trim they were clones. We had to paint the bumpers a diff color on the truck I would as a kid so I wouldn't take the old mans truck to school. GM did have special ordering available was popular in this area in particular because this area had massive MFG as well as Bethlehem Steel Co and Western Electric. So there are some special order freaks we have come across. I have 1966 Utility body GMC c20 that has the 348 motor and giant oil bath air cleaner in it. That was thee very first 348 motor I ever saw until I saw a Metro Cab in our shop as a kid. The metro cabs mainly had the 348 motors. I remember my dad getting tons of em from NY and NJ all smashed up and we would pull the motors and install em in trucks or local cab companies bought em from us.
I'm surprised that this truck has an I-6 instead of a V-8.
Leave it alone Fred Sanford will want back the minute U take it...
She's nothing to say on this one.
Man, nice videos, but audio stinks !
Audio is fine - get your hearing checked
Talk some other time just take it home an work on it
Seek Jesus! Repent for the Kingdom is at hand! Jesus is the way! The truth! And the life! He’s the ONLY way! Open the Bible, read and understand that we are in the last days! Put your full trust in him! Believe 1 Corinthians 15 1-4!