Honda Civic d15z6 turbo Anti lag Launch control HUGE FLAMES!

Поділитися
Вставка

КОМЕНТАРІ • 56

  • @crx_oliver
    @crx_oliver 3 роки тому +26

    This looks and sounds so satisfying... I'm kinda jealous 😂 great job man 👍👍👍

    • @brammerdude
      @brammerdude  3 роки тому +2

      thx nice you enjoyed the vid!

  • @audysantana2565
    @audysantana2565 3 роки тому +16

    What ecu and tuning program was used on this tune? This 2 step is sick!!

  • @charliej.911
    @charliej.911 3 роки тому +5

    Bro that’s fucking mint ,

  • @callummcleish5281
    @callummcleish5281 3 роки тому +5

    I've watched this about twenty times holy fuck lol

    • @brammerdude
      @brammerdude  3 роки тому +3

      haha still watch it sometime's

  • @xrkemo4788
    @xrkemo4788 3 роки тому +6

    Dude what are your fuel and timing set at? Need this

  • @RagezZLoL
    @RagezZLoL 3 роки тому +3

    Got a d15b2 gonna have to swap a vtec head on and turbo it. But im gonna need this tune lmao

  • @KrzysiekTannenberg
    @KrzysiekTannenberg 3 роки тому +5

    Does this jet engine make your car turn a liitle bit right?

  • @flogus2763
    @flogus2763 3 роки тому +1

    What is your engine setup ?
    Cause its Realy hard to find some help to upgrade m'y d15z6

  • @Marrque
    @Marrque 3 роки тому

    pretty

  • @cityzen9839
    @cityzen9839 2 роки тому

    😍😍😍😍

  • @1BadRAMLimited
    @1BadRAMLimited 2 роки тому +5

    I have never seen this many anti lag limiter hits on a video ever! Lol did it blow afterwards?

    • @brammerdude
      @brammerdude  2 роки тому +5

      this vid we where thrying to blow it up just kept taking it haha

  • @csabasalamon140
    @csabasalamon140 3 роки тому +4

    Nice job mate!👌 If no secret, which tuner software can make that?

  • @bobbyto18
    @bobbyto18 4 роки тому +7

    Amazing flames ! Can you share the setup ?

    • @brammerdude
      @brammerdude  4 роки тому +8

      thx mate to be honest it is a very basic setup
      D15z6 stock engine
      with a aliexpress/ebay turbo setup
      nothing more done to it only got a very good tune on it haha

    • @oshee_3rdeye494
      @oshee_3rdeye494 3 роки тому +1

      @@brammerdude do you have oem ecu?

    • @brammerdude
      @brammerdude  3 роки тому +7

      @@oshee_3rdeye494 yea running p28 ecu out of a del sol if m correct

    • @oshee_3rdeye494
      @oshee_3rdeye494 3 роки тому

      @@brammerdude thanks!

    • @Tazz-7375
      @Tazz-7375 3 роки тому

      @@brammerdude who's is your tuner pal?

  • @wolfcivic95
    @wolfcivic95 3 роки тому +2

    Sounds sick dude , what rpm is the cut set sounds asif its about 15 or less rpm cut mate?

    • @brammerdude
      @brammerdude  3 роки тому +2

      yea just normal 95 petrol haha

    • @wolfcivic95
      @wolfcivic95 3 роки тому +1

      What rpm is the cut set at mate sounds less than 15rpm lol... a want it on my y7 so bad lol

    • @brammerdude
      @brammerdude  3 роки тому +1

      @@wolfcivic95 think it,s around 7k rpm also doing this sort of long launch control and stupid flames, only do it on a engine that doesn't matter to you haha it will kill your engine

    • @wolfcivic95
      @wolfcivic95 3 роки тому

      @@brammerdude surprised the manifold didnt blow a hole init, u can see it glowing red 🤣🤣🤣🤣 i hear what your saying , i wouldnt do it as extreme as this man, would be too scared it went on fire , i love my ej6 coupe 🤣🤣 love the d16y7 engine but there cheap so all good there, got a b16a 90s engine sitting going to get it init at one point, touched 120 today for first time driving pretty buzzed about it 🤣🤣🤣🤣🤣

    • @brammerdude
      @brammerdude  3 роки тому +6

      @@wolfcivic95 hahaha manifold is cast iron so it can handle it pretty well yea, engine wise didn't give a dam new motor was ready to go in and this engine was already abused and used alot of oil haha. all fun and games been at it the whole night burnouts launch everything end of the evening engine still ran fine hahaha

  • @Kg0rilla
    @Kg0rilla 3 роки тому +1

    where's the launch mate?

  • @3rdinitiate
    @3rdinitiate 2 роки тому +1

    Bye bye hotside

  • @mohammadqadri5065
    @mohammadqadri5065 6 місяців тому +2

    rip turbo

  • @sliponbanan5296
    @sliponbanan5296 25 днів тому

    I think you got a a10 warthog in your honda

  • @BoostedPastime
    @BoostedPastime 4 роки тому +2

    What octane fuel are you running?

    • @brammerdude
      @brammerdude  4 роки тому +6

      just euro 95

    • @BoostedPastime
      @BoostedPastime 4 роки тому +5

      @@brammerdude That is pretty amazing I have never seen such a potent flame.

  • @yeefulor9954
    @yeefulor9954 Рік тому

    danger to manifold lol

  • @BoostedPastime
    @BoostedPastime 4 роки тому +3

    Are you running rich to shoot bigger flames?

    • @brammerdude
      @brammerdude  4 роки тому +5

      no man no extra fuel dumped in the tune

    • @BoostedPastime
      @BoostedPastime 4 роки тому +2

      @@brammerdude That is really cool, you have it tuned on Neptune? I would like to achieve this effect tuning on Crome.

  • @neodas9540
    @neodas9540 11 місяців тому +1

    just mind blowing, wanna do the same on mine, can you give us a "todo" list of what you did / what it need ?

    • @brammerdude
      @brammerdude  3 місяці тому +1

      It.s just an turbo kit on stock engine (just don.t need to give anything about your engine ain.t good for it.)

    • @neodas9540
      @neodas9540 3 місяці тому +1

      @@brammerdude bolt on turbo kit from eBay? Any price range? Thanks for the previous answer (:
      I know it's bad idea to do that on a full stock one with 80.000km, but the tunings gods whisper in my ear to do it

    • @brammerdude
      @brammerdude  3 місяці тому

      @@neodas9540 yes just ebay/aliexpress turbo kit

  • @alcobuilt2225
    @alcobuilt2225 3 роки тому +1

    Got an ig?

  • @tyren5001
    @tyren5001 4 роки тому

    wat voor programma is die getuned? hondata?

    • @brammerdude
      @brammerdude  4 роки тому

      p28 ecu volgens mij was het ectune kan ook neptune zijn geweest

  • @javon_bruhh2479
    @javon_bruhh2479 2 роки тому

    What bov is on it?

    • @brammerdude
      @brammerdude  2 роки тому +1

      no bov on this setup

    • @javon_bruhh2479
      @javon_bruhh2479 2 роки тому

      @@brammerdude bypass valve? What are you running to get your turbo noise?

    • @chongos5018
      @chongos5018 4 місяці тому

      just no BOV, external wastegate used instead@@javon_bruhh2479

  • @antonym24
    @antonym24 2 роки тому

    You guys have an insta?