Too less time to get the solder to get hot and to attach to the pins and to the pcb, you need to hold down a few seconds more to get the solder as a mirror.
Sir I have one I'm working on soniq plasma TV but Samsung board , starting but no display I found out the igbt trnstr is faulty two of it from the larger invtr,i replace it twice but still blowing never see another shorten,i need help thanks
I have a big problem with my Samsung PS51D450 TV I have a problem that cannot be seen I saw your video on youtube same problem I followed your repair the problem and I can't read the code of the 4-pin component behind the pcb I saw the abbreviations of the IGBT component could you help me understand the code? As in your video I have a short circuit on the capacitor
Hi: In the Samsung PL43E400U the FGD4536 is turned on and off by an OpAmp rail to rail D8698 of 8 pins. There is also an IRS4427 driver of two outputs A and B in phase with the inputs. This driver uses it to turn on and off two RJP63K2 You should see if any of these IC is the one that the teacher changed in the PN51D440A5D model.
next time please get rid of the noisy back round music its irritating, otherwise good presentation/
Magandao omaga! Greetings from Bulgaria, I am seafarer and onboard we have many Philippino!
Magandang araw sa yo.
Saludos desde Venezuela, Dios te bendiga grandemente. 😍😍
New subcriber here
Very illustrative thank you so much God Bless more power Sir
Good great best job thanks for sharing 👌👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾🙏
Very imparting tutorial , your new friend is watching.
Thanks
Your new friend is here subscribed already
nice tutorial...new subscriber here
Thanks you.
Galing galing gayyem👏👏👏
Salamat gayyem
New subscriber from cebu nice tutorial sir
Thanks for the sub!
done din sa sub sayo..
nice
What if the TV is showing negative picture?
Great job, I have already subscribed
Thanks for the sub!
Shout out Boss
Shout out sayo
nice share....thank you
Thank you too
new friend here from team tukayo
Salamat team tukayo
Good sir
Ok
Pabisita din po lods
Muito bom.
Great video but no need for the rubbish Generic music it’s rather distracting
sana noon ko pa napanood baka sakali di ako nakautang sa bumbay. :)
Idol I'm watching
thanks for watching
Please how can I install universal board to Samsung plasma tv model pa43h4100ar
@@abubakarissa922 I did not yet attempt to install a universal to a plasma tv. I think it will not gonna work.
Thanks,but if u can help me with the schematic diagram of t-con board I will be able to do the rest.t-con board number is lj41-10346a
thanks master
Any time
Done damtak
Minute 21:45, you need the green desoldering paste for doing that, that way, you will over-hot the pcb lines!! Don't do that!!
Thanks for the advice
Gud evening tevs you know the service mode of Avision smart led tv.
Try menu 1147
Halo i need advise for my not turning on plasma 60 inch telefunken old one...
Am new here Please what's the name of that panel? Help a brother
I have same tv like this one you are repairing, it has a sound but no pictures, what can I do?
good video, but the worst sounding boring human voice in the world is a lot better than a robotic one.
Too less time to get the solder to get hot and to attach to the pins and to the pcb, you need to hold down a few seconds more to get the solder as a mirror.
The soldering lead is not good quality. So its looks that way.
Pls the music/sound is distracting
Hello
I have questions
Is normal heat sink temperature is hot after changing.
When is on after 15 minutes..I can’t touch the heat sink..
It's really hot.
Sir I have one I'm working on soniq plasma TV but Samsung board , starting but no display I found out the igbt trnstr is faulty two of it from the larger invtr,i replace it twice but still blowing never see another shorten,i need help thanks
Look at the ceramic capacitor connected to the IGBT source and drain. In some instances, it's also the faulty one.
@@tevzTVTevatronics OK I will do that,thanks
I have a big problem with my Samsung PS51D450 TV I have a problem that cannot be seen I saw your video on youtube same problem I followed your repair the problem and I can't read the code of the 4-pin component behind the pcb I saw the abbreviations of the IGBT component could you help me understand the code?
As in your video I have a short circuit on the capacitor
Hi:
In the Samsung PL43E400U the FGD4536 is turned on and off by an OpAmp rail to rail D8698 of 8 pins.
There is also an IRS4427 driver of two outputs A and B in phase with the inputs. This driver uses it to turn on and off two RJP63K2
You should see if any of these IC is the one that the teacher changed in the PN51D440A5D model.
Good day master... Ung samsung plasma na ginawa ko sir... After 1hour nmamatay po sya.. Minsan wala pang isang oras...
nag palit kaba ng IGBT?
Hindi pa sir...
Tsaka ganun po ba tlga un sir.. Ung heat sink nya is grounded may nasusukat ako 150+volts
Baka Papa abet ko to
hahaha thanks
The music was so distracting!!!
Im sorry
What up number