The more I watch your boat repairs videos, the happier I am just sitting on the beach in the Tropic Shade... living my life vicariously through Nikki and Jason.
I was scrolling down the comments until I found this. I knew someone else had to have noticed that. If you can't remember the last time you had sex with a woman, you are either gay or married. - Jeff Foxworthy
I don't know why, but I love these repair videos as much or more than your happy fun playtime videos. Really enjoyable and fun to watch. I think it's awesome to see you guys working through all these problems with such a good attitude. Kudos!
I used to own a 45fter in Australua. That brings back so many horrible memories. At least, these 2 get along. My ex (operative word ex) always found something wrong with my way of doing things.
Actually the repair videos give an honest and refreshing look into what your life is really like, besides just the happy boating adventures. Good job on the renovation so far. I'm a 30 year remod professional.
This was my ABSOLUTE FAVORITE EPISODE TO DATE!!! You guys have traveled far and wide and shared so much with us but I will have to say that when YOU TWO ARE LAUGHING AND JOKING AROUND...IT MAKES FOR THE BEST BEST VIDEO!!! YOU GUYS NEED TO SHARE MORE OF THIS SIDE OF YOUR PERSONALITIES BECAUSE I LAUGHED THROUGH THIS WHOLE VIDEO! Normally you guys are so serious only throwing a smidgen of fun like this. There were A LOT of "THAT'S WHAT SHE SAID" & "THATS WHAT HE SAID" moments, Nd tou guys really don't know just how funny you are when ya play around doing boat work or whatever it might be...and I'm all for it I love the new sunglasses Nik. I could go on and on but I'll stop with saying I'm betting on Nik's hatch lasting longest and also I want NIK TO KNOW THAT I LOVE YOUR HAIR AND I WISH YOU WOULD LET IT CONTINUE TO GROW OUT TO ABOUT BOOBIE LENGTH. (I'm straight by the way and that may have sounded weird, just wanted to clarify) I THINK YOU LOOK LIKE 25 year old anyway so your not to old to wear long hair Nd it look SO CUTE on you!! HECK IM 40ish and mine is waist length. Girlfriend let your CROWN AND GLORY GROW...HAHA I can't wait to see the style fridge/freezer you get and even THE INSTALL, because if it's even half as funny as the yank, push, pull, tug and Jason's "laying on the floor in the "having a baby position" then it will be worth the week I have to wait to see next week's episode. Your channel is growing so fast and so are you both as sailor's as well as your video and editing skills. Thanks for the laughs this episode!!! I'm living for it! 😂😂 God bless and hugs from a TENNESSEE FAN SINCE THE FIRST VIDEO! 🙋♀️⛵🌏⚓😬
I am 74 years young with COPD and on oxygen 24/7, I love these videos, I have done a little sailing in my younger years and always wanted to do what y'all are doing but can't even hardly get out of the house anymore, I love y'all happy life, keep up the good work.
Next time you find your self banging on the ends of bolts, thread the nut on the very end of the bolt prior to hammering to protect the bolt threads from damage. It doesn't matter if you have all new hardware, but it does give you a bit bigger target to swing at.
@@nickthequick no it distributes the force over much more surface area than just the hammer head. By threading the nut two or three rotations, it protects the bolt threads from impact
I am busy with a full refit, and suddenly I don’t feel so bad about things taking much longer than I thought they should. You make me feel sooo much better😁
I live in a 1946 farmhouse that I remodeled down to the rafters and studs...I feel your pain. That is why I named it Crazy 8. I love seeing ya'll work together on these repairs. That is what builds a true relationship!
Love the repair videos! Trick for those stripped out screw holes that works without letting the epoxy have to dry first is pushing small rolled out pieces of bronze (not steel) wool fine or medium infused with epoxy using an ice pick or awl. The threads grab the mix and you end up with a pretty bomb proof bond. Have used this on several stripped out screws on downhill ski bindings. If the hole is too wallowed out you might have to let cure first.
Replace the fridge with a stainless steel Electrolux inverter fridge. They're 5 star energy efficient, around 310kw/year. Just keep room around the rear of it for airflow. I replaced our custom onboard job with one and never looked back. Best part is they're not custom and don't require parts you can never find. Just glue a clip latch onto the doors to keep them shut in rough seas. You just won't find anything as advanced nor energy efficient on the custom market. A single upright unit will be more efficient than two smaller units.
Not sure that would fit in that space. There is not much room there. If they go with an upright, then getting a French Door style model might fit better as the doors would be small enough to open all the way. Still, it would really leave very little room. Most uprights are quite deep, front to back and that's a tiny space. EDIT: Then again, if they go with a smaller unit that isn't as deep, they could repurpose the space next to it with a French door upright cabinet and vastly increase the kitchen storage space. Hmmm... Very interesting ideas are forming in my head...
How about cannibalizing all the working parts from a $150 Walmart mini fridge and installing them in your custom application? By creating a new back/floor panel you might not even need to recharge the gas. I bet these units are ubiquitous around the world too.
The power of marine grade Seka is now made legendary thanks to the GW crew... That was so painful to watch that when my steward asked what I'd like, I replied you can take the rest of the evening off, the Wynns have tired me out...lol... Your tenacity is wonderfully infectious, have a great week, hopefully sunny, warm and dry!
Should be required viewing for everyone thinking of boat ownership😅 And somehow y'all still seem to like each other after the project. 💑 Thanks for all ya do!
As John Quincy Adams said "Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish" I don't think he was referring to boat work though, but you guys have demonstrated how right he was. If it had been me removing the freezer, I would have just got a bigger hammer, and I don't think it would have ended well. Thanks for another great video.
Lots of work for sure. Jason I have a tip for you when working with any silicone. In the plumbing industry we use “tooling foam” when we want a smooth finished product. You can get it at most plumbing suppliers or good hardware store. Place silicone as intended but before smoothing, spray the foam onto the silicone and then smooth it, making sure to remove large buildups as you go. Good luck. Love you guys
True. Or just use the blade from a hacksaw. Wrap some tape round one end or wear a glove. It bends and goes closer to the floor or wall. Used them in tight fit places before.
Lol. I have to agree with the sawzall. It would be in pieces lol. Their going to have to build a cabinet for the new fridge anyway. Can’t wait to see the finish.
Love your determination and attitude . . . I just spent three days doing some finishing work on my house and at the eleventh hour broke a vital piece . . . just had to laugh it off, take a day off and then try again. Fixed it all , and then sat down with a coffee and watched this - perfect timing , made me smile to see folk battle on - and keep their chins up , Cheers!
I've been working on my house also, wasn't this inspiring? Where in this great world is this vital piece which broke in the eleventh hour? Isn't that how it always works? Just curious to see the origins of this message. I'm in the USA.
Thank you guys for sharing your boat project adventures. I love that you keep your sense of humor throughout. The 'great' thing about projects is what you learn as you go. Typically it's what to do better next time :). I love that you have your boat project list categorized into sunny and rainy days too. Smart. Thanks for another great video!
I’m so glad others struggle with projects that seemingly should be a few hours work and turn into more than anticipated. Thanks it makes me feel less incompetent.
Watching you just tap at your hatches like someone didn't 5200 them shut makes me so jealous. We did butyl tape on our hatches and a long term cruiser next to us made us feel extremely bad for doing "stupid newbie sailor things" even though we'd researched it quite a bit and lectured us for quite a while not why we shouldn't do it. 4 months, 2 hurricanes and well over 40 knots of winds later, the hatch is doing awesome. So happy to see you making progress on getting Curiosity ready to be back on the water!
Wow! You two are an inspiration on "sticking with it." Thanks for sharing the struggles along with the fun. All the hard work will pay off when you get back to sailing with the peace of mind of a "healthy" boat.
My sympathies, the challenge of working in small space and with limited tools is daunting. Nine BOATS later, from dinghy to blue water sailing yacht. The tasks are very interesting. YOU GUYS DID IT WELL! Years of 'doing the boat work' has taught me two balanced memory items.... TRAINING & TIME ..... these are a common trade off in DYI projects, the skill comes later by doing. While the training may include some increase in skill, the time becomes a factor in that doing something for the first time is ALWAYS longer. I have authored several technical manuals on 'tec-stuff' for the military and the boat challenge is not that different than what our young soldiers face when disassembling a heavy lift vehicle. Still the TRAINING vs TIME balance and the skill vs experience comes with yet more time. Love the series, thanks for keeping up the work..
I genuinely felt Jason’s pain at the end when he looked so exhausted. I know exactly how that feeling of defeat is, but also how rewarding when you finally get the task accomplished. 👍🏼
Great and very real video!!! Anyone who's ever owned a boat and tried to replace something on it can relate to your video. What looks like a simple project at the beginning, quickly goes sideways into frustration and then, when you discover that the previous owner decided to put 5200 on the back side of what you're trying to remove when they slid it in and there's no way to get to it, you realize that the best solution is to buy a new boat, but now, you can't sell yours because of the demo you're attempting.
I tend to think “I can’t do that, I don’t know how “. You inspire us all to just start. No matter how hard or how long it takes you eventually get done.😊
Always remember, there was a time you didn't know how to walk and didn't know you couldn't. You just tried until you knew how. That's how we learn in life. You can read, watch, be taught but learning is experience. The pain of mistakes are the lessons we truly learn. I think we get less willing to endure the frustration and pain of learning as we get older. Someone says, pain is growth. Gotta love this couples willingness.
I wait all week for your videos and while boat repairs aren't my favorite, you guys are so funny, that you make it fun to watch. That fridge was a beast! Hopefully, the refit won't make it look like a little a little mouse. Keeping my fingers crossed. --Jessica from Florida🌞
I’m so tired, and I haven’t even done anything! 😱 You guys are champs. I hope that whatever makes its way into that fridge/freezer space will *NEVER* give you a single second of grief! 💯
WE have 14 hatches on our cat. Replaced them all when we bought her 8 years ago. Used sikaflex and allows good for ages. After about 4 years one or 2 started to leak. Try and get them off without damaging gelcoat or bending the aluminium. Now I only use Sikaflex for certain projects. Hatches will all be re sealed with butyl. Lesson learned.
And I used to service those things for living. I'm still trying to figure out how I stuck with it for 22 years. Well you kept your sense of humor and its another job done.
You mentioned 40 hours of editing, but the quality of your videos really makes your channel a pleasure to watch. Yours are the opposite of those with someone who is showing, dimly lit and out of focus how to do something technical when their hands are in the way of seeing what they're doing, and who mumbles through audio too low to hear. I know your video recording and editing is a lot of work, but your quality and skill is noticed and appreciated by 300,000 viewers, including me.
Great DIY video. Side thought... if you haven't figured out a replacement solution for the fridge & freezer, you might consider looking at the ultra-efficient "Dometic" (etc...) line of 12v portable camping coolers, which feature fridge/freezer settings built into each individual unit. Slight problem, of course... they're not likely going to fit the OEM locations without some tricky/costly cabinet work. That said, given the many size offerings of 12v camping coolers, the coolers may fit/work better somewhere else, while the oem fridge/freezer area becomes new storage space.
We added two fridge freezers to our Jeanneau 440. The Vitrifrigo DRW 70 all in one is a drawer ac/dc frig/freezer. They can be changed depending on need at anytime. We did an episode on it if you want to see. BTW they have remote compressors to make fit easier.
A fun episode to watch, love the positive attitudes on such tedious projects, you two are the best! Keep the faith, everything will work out for you! ❤️❤️
I wish I could have been there to help you guys take the refrigerator out, I think two tools would have helped, reciprocating saw with a Long Blade, and a flush cut saw. Y'all are great inspiration for us older farts.
Hi guys, thank for the demo video. I first want to say I am not a boat guy, more of RV but I have worked on a lot of stuff in my life and I hope the follow comments can help. 1) If you are using those razor blade knifes you must wear cut resist gloves. You can get thin sticky one. I wear mine all the time. 2) I cannot do projects without good footwear on, bare feet or slippers just seems wrong. You don't need safe boats just some non-mar shoes. 3) When I strip wood screws I use a wood plug with epoxy , that way I can work the same day and the epoxy just hardens and makes it better. Also I would suggest you do not use you impact driver on putting the screws into the final position. If you do the final tightening by hand you have a better "feel". 4) I would suggest you invest in a battery operated oscillation tool. With a knife blade it cut old caulking like butter. The various saw blades cut well in small spaces. If you can find one that works with your existing battery drill that is best. Thanks again for all you work.
In spite of the issues you're uncovering as you muddle through the repairs, I still think it would be nice to own a large cat someday. But not Curiosity. You're doing more to help others thinking about taking the sailing plunge make better risk/reward decisions, and creating a checklist of what to look for, and avoid, when looking/buying. Thanks for that.
Great work, guys. For easier stripping of old silicone sealant, spray it with WD40, leave for a short time, then it will simply peel away and wipe clean (thank you NASA). Love the channel! G.
I’ve said this before I’ll say it again Nikki gives the best, most natural commercials of any UA-camr I’ve ever seen. I actually don’t mind sitting through her ads.
Thanks Nikki and Jason, pulling out the fridge freezer unit on our L40 was also on our list for this year but we have to delay it to next year. Watching your demo has really prepared us for what’s to come! 💕🤞🏻
Found your channel a few weeks ago. Please get an oscillating cordless tool. With all the attachments, flush cutting and scrapping. Very cheap now days… Love that you two stay positive with/for each other.
When using butyl tape on bolts, always keep the bolt head stationary and only turn the nut. This will help keep the butyl tape in place without tearing or slipping. Re-watch some of the "Sail Life" videos and you will see him trying to keep the head steady while tightening the nuts without help. Definitely a two person job if you can! Andy with "Boatworks Today" is also a great UA-cam channel for repairs and rebuilds.
Mads could design a wonderful fridge and freezer for that space with his eyes closed and he would have wonderful dohickeys attached to it to monitor the temps! :-)
@@rogerdepass9028 He certainly does like everything to be "pretty darn spiffy"! His attention to detail and the research he puts into his projects definitely shows. Truly inspiring to not settle for half-assed work.
I recently found you guys and pretty much binge watch your older episodes, what's truly amazing is no matter how hard or difficult the task turns out to be you guys just roll with it and are always smiling and are never in a bad mood at least what you show us, anyways keep on sailing maybe you can thank God once in a while for keeping you safe bless you on your travels may the continue to keep surrounding you with angels
In the vanlife community for the roof vent fans (similar to your hatches) we use butyl tape AND sika. We general cover the screw heads with sika and put a bead around the frame even though we have butyl squeezing out the sides. It’s the “pants and suspenders” theory. Plus on a van roof no one really sees it.
You guys are SO inspiring!!! Thanks!!! I only have a conversion van that needs tweaking….I’m going to go look at fuse kits to see how to get house lights and things working again. I already worked on my (new to me) bicycle today so I can go ‘tooling’ around and start my fitness.
I've been a fan of your channel since you were in the rv heading to Alaska and key west. You two are amazing, would love to see curiosity in person. Be safe you guys.
Did anyone ever think bout fixing the refrigeration in such a nice looking, well fitted unit? Sometimes repair is easier and better than replacement, IMHO.
Even though we do not have a boat, we have an RV, we still are intrigued by how well y'all are able to do all these repairs! We laughed about the fridge not coming off the wall, reminded us of doing a project that should have taken 5 minutes, it winds up taking so much longer! ~ Shion and Matthew
I hope you go with drawer type fridge/freezer. I've found they hold more, but you have to do some digging in the freezer on occasion to find what you're looking for.
You guys never get defeated! Great job. I love how Jason is working his butt off (he literally has no butt) & Nikki is like my cookies better not be cold lol 😂
Can you imagine the history of tools that have demo-ed a home in Texas and a boat in New Zealand?! Whodda thunk? Another super great episode showing perseverance /and/ patience.
Yet another great DIY video. Though I sold my Catalina 36, eight years ago...these boat project videos make it feel like it was only yesterday. Yup...never underestimate a boat project...EVER!
It's been broken since French Polynesia, so they've been just using it for misc. storage. I'm sure Nikki cleaned it out prior to the start of shooting. Curious Minion
Success! And no major injuries!! Slow and steady usually gets you there. You won't win the race, but you'll get to the finish line before they pack up everything. Haha.
OMG!!! The old footage of Jason checking the fridge with a heat gun three years ago made me look up how long I've been watching your channel. (I remember watching the video when Jason first did that.) I've been watching your channel for ALMOST THREE YEARS!!!!!! DAMN!!!! (I did sleep sometimes though.
Oh dear reminds me of my 30 minute job on a Bene 411 F/F , Just a quick regas - 2 days later & 2K out of pocket I finished BUT cold beer & steak, Vegies & fruit all the way to Tonga .. Well done , Great team work .
Doing great guys but you should put the nuts back when hitting thread ends with a hammer as you destroy the threads, you are a great team and I do enjoy your videos. Keep up the good work if the weather lets you.
A dremel with a grinding disc on the end can "fix" smashed end threads. Just round the tip of the bolt off so the smashed threads are gone. Done this myself a couple times after having to hammer out a rusted bolt on my old jeep.
Agreed! Hitting steel with steel is not a good idea, it "bruises" the end. Put the nuts back or at least hit it with a nylon or copper mallet. A scrap bit of wood is a good substitute.(Hit the wood with the hammer!)
Man-o-man! I'm sitting here in my chair moving and helping you guys pick up and move that fridge like crazy! I'm surprised my chair didn't break here at my desk in my office from me just shifting around so much! That MUST have been RELIEVING as soon as you felt break free. It was for ME anyways! Jason - GREAT job editing all this for us! You both are SO refreshing to watch! That fridge job was NOT a 10 out of 10 ... More like..... 15 out of 10!!
This might be one of my most fav videos of yours I have watched. 😂 We're renovating across the pond (Aus) at the moment and watching you pull out the fridge had the husbo and I in stitches. 😂 We've just done the same with a cabinet in the kitchen that wanted to cling on to the wall for another 100+ years. Anxiously awaiting the next 40+ hours of video editing for the next episode 😉😁
It's NFL week 1 and I still wake up on a Sunday Morning and check UA-cam for new Gone With the Wynns episode. How sad is that? Always a good way to start the week.
My 2 cents as I work on my rv. When tightening your screws use a manual screwdriver not the power drill. This will prevent stripping. I'm only half way through the video in case you already did that. Enjoy watching your videos.
Videos featuring boat cleaning, maintenance, repair and upgrades are my favorite. It probably means there's something wrong with me but please keep up the videos!
Nikki: We'll reward ourselves with a fresh baked cookie- Cookie Monster: *I've been summoned* You showing off your tools reminded me so much of the Choose Your Character screen from a Super Smash Bros game...Jason's special move would be Caulk It Up
OMG this brings back soo many painful memories! You two are rock stars. I replaced all my glass and rebuilt my hatches took me days (66 here) 1 day work two days recovery Best news Just sold the boat and except for my labor broke even!! Whoohoo. Keep up the awesomeness
This should be considered an educational video - not on the project itself, but on how to maintain a positive attitude (at least, enough of one for the final version of the video 😉). "Can't do The Main Thing until I do these three or five other Things that I didn't even know about until I got started" reliably drives me crazy. Having to deal with that on a boat, where you wind up dismantling half the deck/bulkhead to get at the final hose, screw, or bit of caulk, is beyond the beyond. You've given us a great example of triumph via persistence, patience, and good humor. Congrats!... ....and maybe put the new one in on wheels or something.
Hey Guys, consider getting/using an impact driver drill for removing screws and bolts. The impact nature reduces the possibility of stripped screws or sheared bolts immensely. It took me a long time to appreciate my impact driver as it's "just a drill that can do less" but it's amazing and has saved me so much time. The action of the impact driver will reduce the chances of screw threads stripping like that when removing them immensely.
Before I get one minute into this I am already laughing. The two of you are so darn cute. Thanks for making my Sunday mornings a day I want to get up for.
Use 2 regular top load deep freezers. You can but a thermostat that turns on and off the freezer to regulate at a temp above freezing to use as a fridge. They are cheap, easy to replace, and very well insulated. My 3.5 qsf uses 60 watts. Put each one on a slide and pull it out when you want to get into it, then slide it back under the counter. Might not be optimal or the best solution, but cost effective, easy to install. Easy to replace,
You both really rose to the occasion with his double entendre episode. 😎 On another note, I think I would have resorted to cutting up the fridge/freezer with a sawzall 24 hours before you finally got it out. Kudos to your persistence and patience.
I'm a Handyman by trade and you two did a fine job for the tools you had available. However, might I suggest that you invest in an oscillating tool. They have many styles of cutting blades to choose from. Ranging from wood/plastic to metal, to ones specially designed for cutting caulk and other sealants. You would've likely shortened you time by a day at least. As long as you have the boat (or another RV) this tool will be well used and appreciated. It's one of my most used tools.
The more I watch your boat repairs videos, the happier I am just sitting on the beach in the Tropic Shade... living my life vicariously through Nikki and Jason.
"I don't want your caulk" had me spitting out my tea 🤣😂🙈 Ah, married life 😂😂😂
I lived in NZ for a few years and, trust me, this is so much funnier when "caulk" is pronounced the way Kiwis say it!
@@robertlang5056 deck, too 😂🤣
@@robertlang5056 Kiwis pronounce 'caulk' as 'cork'. To us it sounded funnier with the American accent; rhymes with rock.
I was scrolling down the comments until I found this.
I knew someone else had to have noticed that.
If you can't remember the last time you had sex with a woman, you are either gay or married. - Jeff Foxworthy
I’ve heard it before. No biggie.
I don't know why, but I love these repair videos as much or more than your happy fun playtime videos. Really enjoyable and fun to watch. I think it's awesome to see you guys working through all these problems with such a good attitude. Kudos!
Same Allen, the few that like to watch and learn, even if we'll never have a cat. I'm a builder custom remodels and makin stuff..
Same.
I used to own a 45fter in Australua. That brings back so many horrible memories. At least, these 2 get along. My ex (operative word ex) always found something wrong with my way of doing things.
@@laurence9695 ya get a real job, hey bud you got this far..
@@laurence9695 that’s called “control”. Good riddance to that in your life.
Actually the repair videos give an honest and refreshing look into what your life is really like, besides just the happy boating adventures. Good job on the renovation so far. I'm a 30 year remod professional.
You both are the loveliest, hardworking folks on UA-cam. The best part of my Sunday!
This was my ABSOLUTE FAVORITE EPISODE TO DATE!!! You guys have traveled far and wide and shared so much with us but I will have to say that when YOU TWO ARE LAUGHING AND JOKING AROUND...IT MAKES FOR THE BEST BEST VIDEO!!! YOU GUYS NEED TO SHARE MORE OF THIS SIDE OF YOUR PERSONALITIES BECAUSE I LAUGHED THROUGH THIS WHOLE VIDEO! Normally you guys are so serious only throwing a smidgen of fun like this. There were A LOT of "THAT'S WHAT SHE SAID" & "THATS WHAT HE SAID" moments, Nd tou guys really don't know just how funny you are when ya play around doing boat work or whatever it might be...and I'm all for it I love the new sunglasses Nik. I could go on and on but I'll stop with saying I'm betting on Nik's hatch lasting longest and also I want NIK TO KNOW THAT I LOVE YOUR HAIR AND I WISH YOU WOULD LET IT CONTINUE TO GROW OUT TO ABOUT BOOBIE LENGTH. (I'm straight by the way and that may have sounded weird, just wanted to clarify) I THINK YOU LOOK LIKE 25 year old anyway so your not to old to wear long hair Nd it look SO CUTE on you!! HECK IM 40ish and mine is waist length. Girlfriend let your CROWN AND GLORY GROW...HAHA
I can't wait to see the style fridge/freezer you get and even THE INSTALL, because if it's even half as funny as the yank, push, pull, tug and Jason's "laying on the floor in the "having a baby position" then it will be worth the week I have to wait to see next week's episode. Your channel is growing so fast and so are you both as sailor's as well as your video and editing skills. Thanks for the laughs this episode!!! I'm living for it! 😂😂
God bless and hugs from a TENNESSEE FAN SINCE THE FIRST VIDEO! 🙋♀️⛵🌏⚓😬
"No Jason. I don't want your caulk!" The joys of married life, isn't it? 😂
"So.... I got mine off and I'm going to have a cookie and coffee, and you can keep working....!" Yup, married life lololololol.
Look for the black caulk skit from SNL it's hilarious
D'oh! I should have tuned in earlier. (It's football season) You stole my quip!
Jason: well I got my rags ready
Lol epic 🤭
I am 74 years young with COPD and on oxygen 24/7, I love these videos, I have done a little sailing in my younger years and always wanted to do what y'all are doing but can't even hardly get out of the house anymore, I love y'all happy life, keep up the good work.
Next time you find your self banging on the ends of bolts, thread the nut on the very end of the bolt prior to hammering to protect the bolt threads from damage. It doesn't matter if you have all new hardware, but it does give you a bit bigger target to swing at.
Thanks for that suggestion. I was going to mention that myself from years of cursing and swearing building enginea and race cars.
you beat me to this. 100% correct
Glad you mentioned that, it was starting to turn me a d d lol
With the force of the nut on the thread won't that ruin the thread of the bolt?
@@nickthequick no it distributes the force over much more surface area than just the hammer head. By threading the nut two or three rotations, it protects the bolt threads from impact
I am busy with a full refit, and suddenly I don’t feel so bad about things taking much longer than I thought they should. You make me feel sooo much better😁
“I don’t want your caulk” and “caulk everywhere” but comes out as cock every time. Nearly fell over laughing.
😝😜
That’s what I heard too.
I live in a 1946 farmhouse that I remodeled down to the rafters and studs...I feel your pain. That is why I named it Crazy 8. I love seeing ya'll work together on these repairs. That is what builds a true relationship!
Where is your coconut machete?
When Jason invents his own cocktail he can call it The Caulktail. (Or The Caulktale.)
Brilliant XD
Brilliant!
I can’t wait to hear what’s in it so I can make one to celebrate at home.
@@gonewiththewynns I was also thinking, "For the Wynns" or "FTWs."
Or Fair Wynns and Following Seas.
Love the repair videos! Trick for those stripped out screw holes that works without letting the epoxy have to dry first is pushing small rolled out pieces of bronze (not steel) wool fine or medium infused with epoxy using an ice pick or awl. The threads grab the mix and you end up with a pretty bomb proof bond. Have used this on several stripped out screws on downhill ski bindings. If the hole is too wallowed out you might have to let cure first.
Replace the fridge with a stainless steel Electrolux inverter fridge. They're 5 star energy efficient, around 310kw/year. Just keep room around the rear of it for airflow. I replaced our custom onboard job with one and never looked back. Best part is they're not custom and don't require parts you can never find. Just glue a clip latch onto the doors to keep them shut in rough seas. You just won't find anything as advanced nor energy efficient on the custom market. A single upright unit will be more efficient than two smaller units.
Not sure that would fit in that space. There is not much room there. If they go with an upright, then getting a French Door style model might fit better as the doors would be small enough to open all the way. Still, it would really leave very little room. Most uprights are quite deep, front to back and that's a tiny space.
EDIT: Then again, if they go with a smaller unit that isn't as deep, they could repurpose the space next to it with a French door upright cabinet and vastly increase the kitchen storage space. Hmmm... Very interesting ideas are forming in my head...
How about cannibalizing all the working parts from a $150 Walmart mini fridge and installing them in your custom application? By creating a new back/floor panel you might not even need to recharge the gas. I bet these units are ubiquitous around the world too.
The power of marine grade Seka is now made legendary thanks to the GW crew... That was so painful to watch that when my steward asked what I'd like, I replied you can take the rest of the evening off, the Wynns have tired me out...lol... Your tenacity is wonderfully infectious, have a great week, hopefully sunny, warm and dry!
Should be required viewing for everyone thinking of boat ownership😅 And somehow y'all still seem to like each other after the project. 💑 Thanks for all ya do!
As John Quincy Adams said "Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish"
I don't think he was referring to boat work though, but you guys have demonstrated how right he was.
If it had been me removing the freezer, I would have just got a bigger hammer, and I don't think it would have ended well.
Thanks for another great video.
I can appreciate you taking time between takes to calm down and refocus. As a furniture maker I often had to do the same thing.
Lots of work for sure. Jason I have a tip for you when working with any silicone. In the plumbing industry we use “tooling foam” when we want a smooth finished product. You can get it at most plumbing suppliers or good hardware store. Place silicone as intended but before smoothing, spray the foam onto the silicone and then smooth it, making sure to remove large buildups as you go. Good luck. Love you guys
You are so much more patient and persistent than me. I would’ve pulled out the saw-zaw in the first hour. LOL
No, Jamie, get the chain saw out and do it properly! The destruction would make you feel better about the job as well
Maybe they need to reuse the white carcass.
True. Or just use the blade from a hacksaw. Wrap some tape round one end or wear a glove. It bends and goes closer to the floor or wall. Used them in tight fit places before.
Lol. I have to agree with the sawzall. It would be in pieces lol. Their going to have to build a cabinet for the new fridge anyway. Can’t wait to see the finish.
Love your determination and attitude . . . I just spent three days doing some finishing work on my house and at the eleventh hour broke a vital piece . . . just had to laugh it off, take a day off and then try again. Fixed it all , and then sat down with a coffee and watched this - perfect timing , made me smile to see folk battle on - and keep their chins up , Cheers!
I've been working on my house also, wasn't this inspiring? Where in this great world is this vital piece which broke in the eleventh hour? Isn't that how it always works? Just curious to see the origins of this message. I'm in the USA.
Thank you guys for sharing your boat project adventures. I love that you keep your sense of humor throughout. The 'great' thing about projects is what you learn as you go. Typically it's what to do better next time :). I love that you have your boat project list categorized into sunny and rainy days too. Smart. Thanks for another great video!
You got to love a beautiful lady who takes charge of a situation and who is also very good with her hands.
For tasks like that fridge removal where you need to see into tight spaces one of those cheap USB endoscope cameras might be useful.
I thought that as well on one of the other episodes where Jason was trying to look in behind something.
Thats some hard work. I would have given up. But you guys keep at it.
I’m so glad others struggle with projects that seemingly should be a few hours work and turn into more than anticipated. Thanks it makes me feel less incompetent.
Sorry of my life, Oh that'll take 5 minutes.... 2 hours later, really??? sad thing is I'd actually consider myself pretty handy.
This Old Boat, pilot episode. Loved this one.
🤣🤣 "I think of it as the IKIA tool"..... 🤣🤣 y'all make me laugh EVERY video. Ahhh.. love watching!!
Watching you just tap at your hatches like someone didn't 5200 them shut makes me so jealous. We did butyl tape on our hatches and a long term cruiser next to us made us feel extremely bad for doing "stupid newbie sailor things" even though we'd researched it quite a bit and lectured us for quite a while not why we shouldn't do it. 4 months, 2 hurricanes and well over 40 knots of winds later, the hatch is doing awesome. So happy to see you making progress on getting Curiosity ready to be back on the water!
Wow! You two are an inspiration on "sticking with it." Thanks for sharing the struggles along with the fun. All the hard work will pay off when you get back to sailing with the peace of mind of a "healthy" boat.
My sympathies, the challenge of working in small space and with limited tools is daunting. Nine BOATS later, from dinghy to blue water sailing yacht. The tasks are very interesting.
YOU GUYS DID IT WELL! Years of 'doing the boat work' has taught me two balanced memory items.... TRAINING & TIME ..... these are a common trade off in DYI projects, the skill comes later by doing. While the training may include some increase in skill, the time becomes a factor in that doing something for the first time is ALWAYS longer.
I have authored several technical manuals on 'tec-stuff' for the military and the boat challenge is not that different than what our young soldiers face when disassembling a heavy lift vehicle. Still the TRAINING vs TIME balance and the skill vs experience comes with yet more time.
Love the series, thanks for keeping up the work..
I genuinely felt Jason’s pain at the end when he looked so exhausted. I know exactly how that feeling of defeat is, but also how rewarding when you finally get the task accomplished. 👍🏼
"in order to succeed, one must fail repeatedly, and sometimes spectacularly"- some wise person, no idea who
Great and very real video!!! Anyone who's ever owned a boat and tried to replace something on it can relate to your video. What looks like a simple project at the beginning, quickly goes sideways into frustration and then, when you discover that the previous owner decided to put 5200 on the back side of what you're trying to remove when they slid it in and there's no way to get to it, you realize that the best solution is to buy a new boat, but now, you can't sell yours because of the demo you're attempting.
I tend to think “I can’t do that, I don’t know how “. You inspire us all to just start. No matter how hard or how long it takes you eventually get done.😊
Always remember, there was a time you didn't know how to walk and didn't know you couldn't. You just tried until you knew how.
That's how we learn in life.
You can read, watch, be taught but learning is experience.
The pain of mistakes are the lessons we truly learn.
I think we get less willing to endure the frustration and pain of learning as we get older.
Someone says, pain is growth.
Gotta love this couples willingness.
I wait all week for your videos and while boat repairs aren't my favorite, you guys are so funny, that you make it fun to watch. That fridge was a beast! Hopefully, the refit won't make it look like a little a little mouse. Keeping my fingers crossed. --Jessica from Florida🌞
I’m so tired, and I haven’t even done anything! 😱 You guys are champs. I hope that whatever makes its way into that fridge/freezer space will *NEVER* give you a single second of grief! 💯
Accomplishments are lifelong lessons, and you are doing the best that you can together, that's all that matters. Keep doing it!
WE have 14 hatches on our cat. Replaced them all when we bought her 8 years ago. Used sikaflex and allows good for ages. After about 4 years one or 2 started to leak. Try and get them off without damaging gelcoat or bending the aluminium. Now I only use Sikaflex for certain projects. Hatches will all be re sealed with butyl. Lesson learned.
And I used to service those things for living. I'm still trying to figure out how I stuck with it for 22 years. Well you kept your sense of humor and its another job done.
Nikki: This is THE nicest day we have had since we have been in NZ
Mother Nature the next day: *We now return to our regularly scheduled programming*
Hey Kim, How you been no news lately.
You mentioned 40 hours of editing, but the quality of your videos really makes your channel a pleasure to watch. Yours are the opposite of those with someone who is showing, dimly lit and out of focus how to do something technical when their hands are in the way of seeing what they're doing, and who mumbles through audio too low to hear. I know your video recording and editing is a lot of work, but your quality and skill is noticed and appreciated by 300,000 viewers, including me.
Don't worry Jason, my wife never wants my caulk either! Great video guys thanks.
Great DIY video. Side thought... if you haven't figured out a replacement solution for the fridge & freezer, you might consider looking at the ultra-efficient "Dometic" (etc...) line of 12v portable camping coolers, which feature fridge/freezer settings built into each individual unit. Slight problem, of course... they're not likely going to fit the OEM locations without some tricky/costly cabinet work. That said, given the many size offerings of 12v camping coolers, the coolers may fit/work better somewhere else, while the oem fridge/freezer area becomes new storage space.
We added two fridge freezers to our Jeanneau 440. The Vitrifrigo DRW 70 all in one is a drawer ac/dc frig/freezer. They can be changed depending on need at anytime. We did an episode on it if you want to see. BTW they have remote compressors to make fit easier.
A fun episode to watch, love the positive attitudes on such tedious projects, you two are the best! Keep the faith, everything will work out for you! ❤️❤️
I wish I could have been there to help you guys take the refrigerator out, I think two tools would have helped, reciprocating saw with a Long Blade, and a flush cut saw. Y'all are great inspiration for us older farts.
I just love how patient you both are, I would have resorted to C4 (plastic explosive!) after about an hour.
Hi guys, thank for the demo video. I first want to say I am not a boat guy, more of RV but I have worked on a lot of stuff in my life and I hope the follow comments can help. 1) If you are using those razor blade knifes you must wear cut resist gloves. You can get thin sticky one. I wear mine all the time. 2) I cannot do projects without good footwear on, bare feet or slippers just seems wrong. You don't need safe boats just some non-mar shoes. 3) When I strip wood screws I use a wood plug with epoxy , that way I can work the same day and the epoxy just hardens and makes it better. Also I would suggest you do not use you impact driver on putting the screws into the final position. If you do the final tightening by hand you have a better "feel". 4) I would suggest you invest in a battery operated oscillation tool. With a knife blade it cut old caulking like butter. The various saw blades cut well in small spaces. If you can find one that works with your existing battery drill that is best.
Thanks again for all you work.
We appreciate your videos SO MUCH!
In spite of the issues you're uncovering as you muddle through the repairs, I still think it would be nice to own a large cat someday. But not Curiosity. You're doing more to help others thinking about taking the sailing plunge make better risk/reward decisions, and creating a checklist of what to look for, and avoid, when looking/buying. Thanks for that.
Great work, guys. For easier stripping of old silicone sealant, spray it with WD40, leave for a short time, then it will simply peel away and wipe clean (thank you NASA). Love the channel! G.
If people just knew of all the products we have today because of NASA.
I’ve said this before I’ll say it again Nikki gives the best, most natural commercials of any UA-camr I’ve ever seen. I actually don’t mind sitting through her ads.
Y'all are the best team! Difficulties don't break your spirits!! Thank you.
Thanks Nikki and Jason, pulling out the fridge freezer unit on our L40 was also on our list for this year but we have to delay it to next year. Watching your demo has really prepared us for what’s to come! 💕🤞🏻
Here we go again Jason playing with his Chaulk lol .....
It’s the accent….
what ...............
Bet ya he puts in with butyl tape and some Ikea screws and nuts.
Found your channel a few weeks ago. Please get an oscillating cordless tool. With all the attachments, flush cutting and scrapping. Very cheap now days…
Love that you two stay positive with/for each other.
I just love Nikki's style so much! It's exactly up my alley. Also loving the red and white shades omg 😍
As soon as you said "I saw a video where they used butyl tape to install them, I literally said "MADS!" outloud. And it was he.
When using butyl tape on bolts, always keep the bolt head stationary and only turn the nut. This will help keep the butyl tape in place without tearing or slipping. Re-watch some of the "Sail Life" videos and you will see him trying to keep the head steady while tightening the nuts without help. Definitely a two person job if you can! Andy with "Boatworks Today" is also a great UA-cam channel for repairs and rebuilds.
Mads could design a wonderful fridge and freezer for that space with his eyes closed and he would have wonderful dohickeys attached to it to monitor the temps! :-)
@@rogerdepass9028 He certainly does like everything to be "pretty darn spiffy"! His attention to detail and the research he puts into his projects definitely shows. Truly inspiring to not settle for half-assed work.
I recently found you guys and pretty much binge watch your older episodes, what's truly amazing is no matter how hard or difficult the task turns out to be you guys just roll with it and are always smiling and are never in a bad mood at least what you show us, anyways keep on sailing maybe you can thank God once in a while for keeping you safe bless you on your travels may the continue to keep surrounding you with angels
28:28 is the best moment in the whole show. Thank you so much for sharing your lives and adventures with us.
In the vanlife community for the roof vent fans (similar to your hatches) we use butyl tape AND sika. We general cover the screw heads with sika and put a bead around the frame even though we have butyl squeezing out the sides. It’s the “pants and suspenders” theory. Plus on a van roof no one really sees it.
Trust in Mads from Sail Life. His refit has been amazing and thorough.
My husband said the same thing
Refit 🤔he built a brand new boat 😁👍
yea, when is it a refit and when is it a re-build :)
You guys are SO inspiring!!! Thanks!!!
I only have a conversion van that needs tweaking….I’m going to go look at fuse kits to see how to get house lights and things working again.
I already worked on my (new to me) bicycle today so I can go ‘tooling’ around and start my fitness.
When I woke up this morning never in my wildest dreams did I imagine Jason showing me his bilge hatch. :-)
I've been a fan of your channel since you were in the rv heading to Alaska and key west. You two are amazing, would love to see curiosity in person. Be safe you guys.
Did anyone ever think bout fixing the refrigeration in such a nice looking, well fitted unit? Sometimes repair is easier and better than replacement, IMHO.
I wondered about that too. We know the unit fits into the space.
I love how you edit your videos. The subtle things you do from sound design to color treatment is so enjoyable to watch.
When you are done using your epoxy pull the plunger back. This will keep it from hardening where it mixes.
So glad to get to watch my favorite couple. Haven’t had internet in 3 weeks due to hurricane Ida.
Thank you both for keeping me company with coffee and cleaning up my house this morning! You two are very motivational. 🤣🙌
Even though we do not have a boat, we have an RV, we still are intrigued by how well y'all are able to do all these repairs! We laughed about the fridge not coming off the wall, reminded us of doing a project that should have taken 5 minutes, it winds up taking so much longer! ~ Shion and Matthew
I hope you go with drawer type fridge/freezer. I've found they hold more, but you have to do some digging in the freezer on occasion to find what you're looking for.
Sadly, it won't fit in our limited space :(
You guys never get defeated! Great job. I love how Jason is working his butt off (he literally has no butt) & Nikki is like my cookies better not be cold lol 😂
Can you imagine the history of tools that have demo-ed a home in Texas and a boat in New Zealand?! Whodda thunk? Another super great episode showing perseverance /and/ patience.
haha. Never thougth of it that way...but some of those tools have made the rounds :)
Yet another great DIY video. Though I sold my Catalina 36, eight years ago...these boat project videos make it feel like it was only yesterday. Yup...never underestimate a boat project...EVER!
I was totally shocked when you opened the refrigerator and it was empty. Broken refrigerator in Swahili means bookshelf with doors.
It's been broken since French Polynesia, so they've been just using it for misc. storage. I'm sure Nikki cleaned it out prior to the start of shooting.
Curious Minion
Success! And no major injuries!! Slow and steady usually gets you there. You won't win the race, but you'll get to the finish line before they pack up everything. Haha.
Both sides of the coin for me today! Reminds me why I sold my last boat and why I look forward to the next one!!
OMG!!! The old footage of Jason checking the fridge with a heat gun three years ago made me look up how long I've been watching your channel. (I remember watching the video when Jason first did that.) I've been watching your channel for ALMOST THREE YEARS!!!!!! DAMN!!!! (I did sleep sometimes though.
Props to you guys for doing repairs and filming almost the entire process, it must make it much longer to get anything done! Love your videos 🙃
Oh dear reminds me of my 30 minute job on a Bene 411 F/F , Just a quick regas - 2 days later & 2K out of pocket I finished BUT cold beer & steak, Vegies & fruit all the way to Tonga .. Well done , Great team work .
Doing great guys but you should put the nuts back when hitting thread ends with a hammer as you destroy the threads, you are a great team and I do enjoy your videos. Keep up the good work if the weather lets you.
A dremel with a grinding disc on the end can "fix" smashed end threads. Just round the tip of the bolt off so the smashed threads are gone. Done this myself a couple times after having to hammer out a rusted bolt on my old jeep.
good advice from an old salt/mechanic. an ounce of prevention is worth a pound of cure!
Came here to say the same thing.
Agreed! Hitting steel with steel is not a good idea, it "bruises" the end. Put the nuts back or at least hit it with a nylon or copper mallet. A scrap bit of wood is a good substitute.(Hit the wood with the hammer!)
That's Rule #1 for removing bolts.... Good call.
Man-o-man! I'm sitting here in my chair moving and helping you guys pick up and move that fridge like crazy! I'm surprised my chair didn't break here at my desk in my office from me just shifting around so much! That MUST have been RELIEVING as soon as you felt break free. It was for ME anyways! Jason - GREAT job editing all this for us! You both are SO refreshing to watch! That fridge job was NOT a 10 out of 10 ... More like..... 15 out of 10!!
This might be one of my most fav videos of yours I have watched. 😂 We're renovating across the pond (Aus) at the moment and watching you pull out the fridge had the husbo and I in stitches. 😂 We've just done the same with a cabinet in the kitchen that wanted to cling on to the wall for another 100+ years.
Anxiously awaiting the next 40+ hours of video editing for the next episode 😉😁
This is SUCH a great sailing channel. Awesome sailors and awesome boat. The filming quality is superb. Really well done!
Nikki and Jason: It's over, Curiosity! We have the high ground!
Boat work: *You underestimate my power*
😂😂😂
It's NFL week 1 and I still wake up on a Sunday Morning and check UA-cam for new Gone With the Wynns episode.
How sad is that?
Always a good way to start the week.
My 2 cents as I work on my rv. When tightening your screws use a manual screwdriver not the power drill. This will prevent stripping. I'm only half way through the video in case you already did that. Enjoy watching your videos.
Videos featuring boat cleaning, maintenance, repair and upgrades are my favorite. It probably means there's something wrong with me but please keep up the videos!
Nikki: We'll reward ourselves with a fresh baked cookie-
Cookie Monster: *I've been summoned*
You showing off your tools reminded me so much of the Choose Your Character screen from a Super Smash Bros game...Jason's special move would be Caulk It Up
😂👍
OMG this brings back soo many painful memories! You two are rock stars. I replaced all my glass and rebuilt my hatches took me days (66 here) 1 day work two days recovery Best news Just sold the boat and except for my labor broke even!! Whoohoo. Keep up the awesomeness
Why do I have visions of Kent watching this and rolling about like a beetle stuck on it's back laughing fit to cry?
We need a 'kent cam' :)
@@gonewiththewynns One of our plans to escape Wa is to head to Florida and have Kent set us up with a boat. He was awesome.
This should be considered an educational video - not on the project itself, but on how to maintain a positive attitude (at least, enough of one for the final version of the video 😉). "Can't do The Main Thing until I do these three or five other Things that I didn't even know about until I got started" reliably drives me crazy. Having to deal with that on a boat, where you wind up dismantling half the deck/bulkhead to get at the final hose, screw, or bit of caulk, is beyond the beyond. You've given us a great example of triumph via persistence, patience, and good humor. Congrats!...
....and maybe put the new one in on wheels or something.
When you have to hammer on the end of a bolt, if you leave the nut at the very end of the bolt, you wont damage the threads.
Hey Guys, consider getting/using an impact driver drill for removing screws and bolts. The impact nature reduces the possibility of stripped screws or sheared bolts immensely. It took me a long time to appreciate my impact driver as it's "just a drill that can do less" but it's amazing and has saved me so much time. The action of the impact driver will reduce the chances of screw threads stripping like that when removing them immensely.
Before I get one minute into this I am already laughing. The two of you are so darn cute. Thanks for making my Sunday mornings a day I want to get up for.
Use 2 regular top load deep freezers. You can but a thermostat that turns on and off the freezer to regulate at a temp above freezing to use as a fridge. They are cheap, easy to replace, and very well insulated. My 3.5 qsf uses 60 watts. Put each one on a slide and pull it out when you want to get into it, then slide it back under the counter. Might not be optimal or the best solution, but cost effective, easy to install. Easy to replace,
You both really rose to the occasion with his double entendre episode. 😎
On another note, I think I would have resorted to cutting up the fridge/freezer with a sawzall 24 hours before you finally got it out. Kudos to your persistence and patience.
Lol, I probably would have ended up with the entire rear wall of the cabin taken out on the second day.
I'm a Handyman by trade and you two did a fine job for the tools you had available. However, might I suggest that you invest in an oscillating tool. They have many styles of cutting blades to choose from. Ranging from wood/plastic to metal, to ones specially designed for cutting caulk and other sealants. You would've likely shortened you time by a day at least. As long as you have the boat (or another RV) this tool will be well used and appreciated. It's one of my most used tools.