This was by far one of the best reviews ive seen and i just went thru about 15 videos trying to see if you could swap a Figuarts head into the demonical body....thabk you for ending my search and answering my question. I am now subscribed 👍
The lack of shading isnt terrible considering Vegeta would be glowing but more lining would have been nice. Great figure, even greater review! Keep it up, friend
I recently got this figure as well, I really like it. Looks great paired with S.H. Figuarts SS3 Goku too! Makes me wish I started collecting Demonical Fit sooner.
Dang I want to get this it’s so much better then my kong studio ssj3 vegeta But I only bought that one to have the ultra ego vegeta. And I had to glue the ssj3 head onto my super hero vegeta body.
i feel it too. the extra torso seems like a waste not to be used, i had to spend more to get kong's majin vegeta as well with the extra legs to create another full vegeta figure. 😂 but DF's waist joint is not as tight as kong's. they forgot to calculate the weight of the head. to be honest, kong's hairsculpt is not bad to me. i like the sharp hair & the shadings. thanks for the visit, friend. 🙏🙏🙏
@@toysfront If I could, would do it twice! I like the dedication, kid. Hope you get alot of subs. You actually dive deep into comparasing and the whole thing. Just great!
The head DOES work on other bodies after pulling the neck peg out. I know because I have a SS Vegeta 2.0 body with the SS3 head plugged in right now on my desk. The only problem is that it is SLIGHTLY higher offset than the regular Vegeta head should be, but is barely noticeable. No need to pull out the actual neck piece; just the peg. It can move around just like normal.
well, i get what you mean, yes, you can plug ss3 head joint in ss2 body, if you're careful, because the neck is elastic, and it will be a tight fit. but joint elasticity is sometimes random between figures and as you can see in the vid, the peg hole between bandai & df is of different size. there are cases where you can plug it in, but taking it out or twisting it might break it. i'm just worried people would break theirs if i suggested it, that's why i advised against it. 😁 thx for visiting, friend, happy collecting ! 👍🙏😉
as i've stated in the video, depending on which demoniacal head set. to put a custom head on this ss3, you need a head joint as well, as you can't use the ss3's head joint for that custom head. i also showed some of the head joint from various vegeta sets. they're mostly slightly different. thx for the visit, friend 🙏😁
This was by far one of the best reviews ive seen and i just went thru about 15 videos trying to see if you could swap a Figuarts head into the demonical body....thabk you for ending my search and answering my question. I am now subscribed 👍
Glad I could help!!!
and thank YOU for visiting 🤗🙏
Best dbz review’s on UA-cam, keep up the great work
thank you for the compliment😁
thanks for the visit, friend🙏
Honestly the editing is real great. Same with the backgrounds.
The lack of shading isnt terrible considering Vegeta would be glowing but more lining would have been nice. Great figure, even greater review! Keep it up, friend
Goes into crazy details an specs! I love it
Sweet great presentation my guy😊
thank you for the compliment😄
thanks for the visit, friend👍
Good review and thanks for doing a video one this I suggested it :)
I recently got this figure as well, I really like it.
Looks great paired with S.H. Figuarts SS3 Goku too!
Makes me wish I started collecting Demonical Fit sooner.
Good review and thanks for doing a video one this I suggested it :) and DF stomps💀
This will be on my display 110%
Wish the eyes were a bit more rounded like Tamashii's prototype, resembling Toriyama's artwork at the time. Great review.
His effect part I feel like would be good as a calamity blaster for the turles coming out
Loved your review, continue the good work :)
thx for the visit, friend 😁 🙏🏻
great vids as always
thank you for the compliment 😃
thanks for the visit, friend👍
Dang I want to get this it’s so much better then my kong studio ssj3 vegeta But I only bought that one to have the ultra ego vegeta. And I had to glue the ssj3 head onto my super hero vegeta body.
i feel it too.
the extra torso seems like a waste not to be used, i had to spend more to get kong's majin vegeta as well with the extra legs to create another full vegeta figure. 😂
but DF's waist joint is not as tight as kong's. they forgot to calculate the weight of the head.
to be honest, kong's hairsculpt is not bad to me. i like the sharp hair & the shadings.
thanks for the visit, friend. 🙏🙏🙏
damn kid u had me on this one
thx for the visit, friend🙏🏻🙏🏻🙏🏻
glad u enjoy the vid😬
@@toysfront If I could, would do it twice! I like the dedication, kid. Hope you get alot of subs. You actually dive deep into comparasing and the whole thing. Just great!
SSJ3 vegeta always makes me think of Sonic the Hedgehog XD
Don't forget radiz the OG ssj3 😂
Will you review any of the upcoming naruto S.H figuarts? I love your reviews and am excited to see more!
Eventually, friend 😁
i think the likeness is weird becuse in ssj3 they dont have eyebrows and that looks really weird on vegeta especaly
where is the best place to buy ?
eBay
Either eBay or 5k toys
i think 5k toys has the best price if u live in the states.
aliexpress has him for everyone else
thx for the visit, friend, i hope u like my vids 😉🙏
can you swap faces with Proud Prince?
Sadly, no, they have different face pegs.
thx for the visit, friend 🙂🙏
Wait why is it called female socket and male pegs I’m confused
apologize, friend.
i'm aware it's redundant. just wanna make it clear that the socket is always female while the peg is always male. 😂
@@toysfront ahh ok stay alive champ
The head DOES work on other bodies after pulling the neck peg out. I know because I have a SS Vegeta 2.0 body with the SS3 head plugged in right now on my desk. The only problem is that it is SLIGHTLY higher offset than the regular Vegeta head should be, but is barely noticeable. No need to pull out the actual neck piece; just the peg. It can move around just like normal.
well, i get what you mean,
yes, you can plug ss3 head joint in ss2 body, if you're careful, because the neck is elastic, and it will be a tight fit.
but joint elasticity is sometimes random between figures and as you can see in the vid, the peg hole between bandai & df is of different size.
there are cases where you can plug it in, but taking it out or twisting it might break it.
i'm just worried people would break theirs if i suggested it, that's why i advised against it. 😁
thx for visiting, friend, happy collecting ! 👍🙏😉
do the hands fit on sh figuarts majin vegeta
Can you put demoncail fit Vegeta head set on this figure?
as i've stated in the video, depending on which demoniacal head set.
to put a custom head on this ss3, you need a head joint as well, as you can't use the ss3's head joint for that custom head.
i also showed some of the head joint from various vegeta sets. they're mostly slightly different.
thx for the visit, friend 🙏😁
This or the proud Prince version?
proud prince, hands down. 😉
@@toysfront thank you 🙏🏼 much appreciated
You can tell he reads his lines off a paper. XD
Other than that, great review!
Might get this one since, DF looks better with SH SSJ3 Goku
they look fantastic together, friend 😄
thx for the visit, friend🙏👍