I can taste the Chrysotile from here! 🙏🏻 you had it tested beforehand. When in doubt, crack open the shaving foam when drilling through it just to protect yourself and the customer
Great video guys, John & Reuben work well together. Totally agree with you John I absolutely hate chipboard flooring as well, especially so when people decide to go through and lay laminate flooring on top of it. Nice job finding those faults John 👍.
My heart used to sink every time I was confronted by a heating centre jumble. John is far too polite in describing other trades messing with any electrical installation work. Why are detailed circuit drawings, and labelling of circuit functions, not a requirement, particularly for control systems? In commercial/industrial installations it is essential.
Great video as always. Looks like some drilling / disturbing of Artex happening in this video. Having my Dad die of mesothelioma I hope it had been checked and tested before drilling without a mask. Maybe worth making a video on the subject.
You need to look for a cable tracer from the IT supplies. Sends a tone down the wires and the receiver picks up and amplifies the tone dependant on proximity to the cable. David Savery showed one in a video. We used to use them to trace back cables in IT wiring. Also like you I hate wiring done badly. Currently dealing with wiring to the wiring centre that’s at the back of the cupboard behind the hot water tank. Power to the supplies is a single radial but someone decided to use filler to “glue” it to the inside of the plasterboard. Just wish they designed houses to have proper risers with proper accessible cable runs.
Great Video, Like to echo some of the comments here. John is just fantastic the way he explains it all and how he treats Reuban. A great asset to the company.
Sometimes when you upgrade the board it throws up many additional problems in this case the shared neutral issue not easily picked up on an EICR originally. The good thing is you are gonna get this resolved with a safer installation in place.
Great video thanks guys, really liking how you two work together, quick question for you if I may. I recenlty accidentialy drilled into a the ring main, to fix this I added two maintenance free JBs under the floor and fixed to a joist with new cables to reconnect the ring. (I went for two JBs to avoid having to double up the connections). Would this be within regs? The JBs are rated at 32a each and the load for the repair is heavy (tumble drier and washing machine / Microwave). I would have loved to pull fresh cable instead of using JBs but pulling up the floor was not an option.
Great work John. I have direct experience on how well these guys work together with the work they did for me. This video just shows the quality to everyone!
Excellent video in fault finding. Intermittent faults are a nightmare and one that took some finding many years ago was also only discovered when a freezer thermostat switched on and I suspect I only found that as I was stood next to the freezer when I heard it switch on.
The 120mm discs are perfect for chipboard flooring . Gives great access and if you use the right cutter it gives a groove (10mm ) so the discs sit flush .. better than ripping up flooring just drill a few of them if needed
1:50 finally a youtuber with a brain 🤣 god knows how many videos I've seen where they blow out the brickwork, just turn off the hammer function 👏👏👏 legend
That house looked like a 60s or 70s build. They used a lot of asestos artex in those days so drilling through it is not a good idea. Artex is so called because "asbestos reinforced textured coating". Always get it checked first.
Dad's an electrician. He always tried to get me into it but I climbed trees instead. I'm watching this as education and most of it goes riiiight over my head. Must be my lack of math brain.
I never understand why u install tubing and pull single wires when doing wireing insted of laying cables. In norway we do this, and its so simple to rewire or if u need extra wires.
Can you explain the importance of an earth on those downlights? I don't see the benefit, it is not like someone can touch it as the light fitting as it is in the ceiling. In a lot of countries they don't put earth on those lighting circuits.
If I was there I’n that situation with the missing cpc I would have put a cable locator croc lead on the cpc at one end and go and find where the cpc stops giving a magnetic field and there’s going to be the fault however it will only work if the cpc is completely disconnected like it was in your situation but if it’s connected but your looking for a poor connection it won’t find it that way because it will still have some kind of continuity
Great film, John and Ruben are a great team. What has happened to Cory? Ruben with John and very little of or no Cory. I probably will not get an answer, but it’s all very strange???
great works guys, i had that test set back in the day , can't remember what they were called. Best thing about them was the fact they put a load resistive load on when testing. Just remembered the name of the test gear , i think it was "drummond"
That foam above the old fused switch looked like it was doing airtightness work. If you just cut it out and yanked the wires through without replacing/resealing then that's why electricians shouldn't be allowed to mess with buildings - they ruin the airtightness. It's fair to say that plumbers aren't much better.
@@goodplacereviewer2495 In April 2002, the UK government introduced air tightness testing alongside the Building Regulations law to enforce standards of dwelling air tightness. The legislation was created in order to lower running costs, verify the standards of materials, prevent uncomfortable drafts and "avoid condensation problems". There was a tumble drier in that small room. One trade messing up another ones work 😂😂😂😂😂😂
“whats that bit of copper string run alongside the red & black in the cooker cable for?” “I dunno, just decoration, I don’t think we need concern ourselves with it, I always just cut em out”. “Ok Dave” snip……
Drilling artex ceiling with no mask on and dust everywhere, most of the artex up till 90s contains asbestos ,jointing cooker cable out 🙄 high load circuit on non accessible jb not best practice and immersion heater should be on its own circuit , something in regs about heater with so many litres should be on its own circuit
Sometimes it just pays to stay in bed. We have all been there socket on the other side of the bedroom no problem then you find it CHIPBOARD FLOORING NOOOOOOO.
So your have changed the consumer unit and re-energised the cooker with no earth then you turn the shower on to test the red for a fault? More of a cowboys kiss than a chefs kiss if you ask me.
Drilling artex without masks?!!! This is why electricians should go on asbestos awareness courses 😉 Please take your health more seriously guys! If you aren’t aware of the risks, get on some courses - you’ll regret it later in life if you don’t. Great video as always guys but please be careful.
Yeah. I made a lot of holes in this house's ceilings before realising that they were still putting asbestos into the Artex until the 1980s. Grumble. Hopefully I won't die of it.
@@xxwookey might have missed the part when he said it was his own house? And the apprentice was his son and he wasn't posting a video for his employer. And indeed since he was carrying out the work on behalf of his employer he would have required a risk assessment and method statement including the asbestos report. Shadow vac. And let's not forget he contaminated the property with dust that should have been properly cleaned. Site manager and I deal with this everyday, so yes h&s law was broken 😂
@@derekwatt2767 Ah. Some crosspurposes there. I was talking about me drilling holes in my ceiling before realising that artex still had asbestos in it. You are talking about the Artisan chaps, who are indeed 'at work'. Fair enough, no disagreement there.
John is such a pleasant and clever bloke, Reuban literally has some of the best work mates to learn from.
In John, Artisan have their own, albeit less sweary, Dave Savery! He would not have been so kind to that plumber. Great skills demonstrated.
John, we've all had these days, I have no idea how it feels to have a camera in your face through it 😄 fair play.
I can taste the Chrysotile from here! 🙏🏻 you had it tested beforehand. When in doubt, crack open the shaving foam when drilling through it just to protect yourself and the customer
John has a really nice manner about him and he doesn't speak to Reuben like he is the Tea boy.
👌🏼
Ruben.that's what you call artisan drilling.👌Jordon that's precision.give that man pack of pringles.
Spot on gents👍
I say give tha young man a pack of drill bits with the Pringles 🤣
John is my absolute favourite to watch, im not an electritian but i could imagine he would be a phenomenal teacher for an apprentice to have
Great video guys, John & Reuben work well together. Totally agree with you John I absolutely hate chipboard flooring as well, especially so when people decide to go through and lay laminate flooring on top of it. Nice job finding those faults John 👍.
John is great. It’s great to see his process in how he solves problems
My heart used to sink every time I was confronted by a heating centre jumble.
John is far too polite in describing other trades messing with any electrical installation work.
Why are detailed circuit drawings, and labelling of circuit functions, not a requirement, particularly for control systems?
In commercial/industrial installations it is essential.
Great video as always. Looks like some drilling / disturbing of Artex happening in this video. Having my Dad die of mesothelioma I hope it had been checked and tested before drilling without a mask. Maybe worth making a video on the subject.
good to see Reuben and John work well doing problem plumber electrical install
What an informative video sharing the stresses of fault finding - well done you two. Reuban will learn a great deal from John.
We all will 😆
You need to look for a cable tracer from the IT supplies. Sends a tone down the wires and the receiver picks up and amplifies the tone dependant on proximity to the cable. David Savery showed one in a video. We used to use them to trace back cables in IT wiring.
Also like you I hate wiring done badly. Currently dealing with wiring to the wiring centre that’s at the back of the cupboard behind the hot water tank. Power to the supplies is a single radial but someone decided to use filler to “glue” it to the inside of the plasterboard.
Just wish they designed houses to have proper risers with proper accessible cable runs.
A big thank you to Artisan Electrics, recently I had a problem resolved by John, a truly 5 star electricians. 👍👍👍
Great Video, Like to echo some of the comments here. John is just fantastic the way he explains it all and how he treats Reuban. A great asset to the company.
Finally, a positive use for my “volt stick”, looking forward to the fix for the shared neutral 👍
Great job, some real life fault finding, John and Ruben make a good team.
Sometimes when you upgrade the board it throws up many additional problems in this case the shared neutral issue not easily picked up on an EICR originally. The good thing is you are gonna get this resolved with a safer installation in place.
On that oven wire, werent you getting some sort of continuity on one of tne cupboard screws?
Great video thanks guys, really liking how you two work together, quick question for you if I may. I recenlty accidentialy drilled into a the ring main, to fix this I added two maintenance free JBs under the floor and fixed to a joist with new cables to reconnect the ring. (I went for two JBs to avoid having to double up the connections). Would this be within regs? The JBs are rated at 32a each and the load for the repair is heavy (tumble drier and washing machine / Microwave). I would have loved to pull fresh cable instead of using JBs but pulling up the floor was not an option.
The whole Artisan team are so natural on camera. Also this episode makes me want to understand what shared neural means
Reuben and John good job working well together.
Great work John. I have direct experience on how well these guys work together with the work they did for me. This video just shows the quality to everyone!
Much appreciated!
Excellent video in fault finding. Intermittent faults are a nightmare and one that took some finding many years ago was also only discovered when a freezer thermostat switched on and I suspect I only found that as I was stood next to the freezer when I heard it switch on.
John A+ for your efforts and patience 👍
Great video and nice to see john take the lead. Great work with all the fixes. Surprised you don't keep a circular saws on each van though
I like this guy John. Ruben too. No stupid larking around. Win.
Amazing video. Looking forward to watch fixing shared neutral video
Asbestos artex?
Some plumbers are hvac guys as well lol and some plumbers understand electric very very well including controls engineering and automation
The 120mm discs are perfect for chipboard flooring . Gives great access and if you use the right cutter it gives a groove (10mm ) so the discs sit flush .. better than ripping up flooring just drill a few of them if needed
Reuban lucky to have such an amazing supervisor.
Very good fault finding video, I prefer the ones where everything goes wrong to see what solutions you come up with.
1:50 finally a youtuber with a brain 🤣 god knows how many videos I've seen where they blow out the brickwork, just turn off the hammer function 👏👏👏 legend
Hi John, can you please tell me how you would know if you have an earth or not at a socket or light for example?
Great work there John, you really have the patience of an angel, really good at fault finding those issues, and again 10/10 quality work
Thanks 👍
Jorden iv bought a Eco flow PowerStation my 3 sola panels are 12.6 v each it came to 39.7v 3.78 a 63.3w will it work or do i just yours 2 panels
Great Vlog fellas,really interesting.
That house looked like a 60s or 70s build. They used a lot of asestos artex in those days so drilling through it is not a good idea. Artex is so called because "asbestos reinforced textured coating". Always get it checked first.
I like John hes a good addition to the team
Dad's an electrician. He always tried to get me into it but I climbed trees instead. I'm watching this as education and most of it goes riiiight over my head. Must be my lack of math brain.
Always enjoy your vids
how did you start being an electrician,very interested in the topic for example what gcses did u take and what courses you took
I never understand why u install tubing and pull single wires when doing wireing insted of laying cables. In norway we do this, and its so simple to rewire or if u need extra wires.
3:20 Worlds noisiest shower
Can you explain the importance of an earth on those downlights?
I don't see the benefit, it is not like someone can touch it as the light fitting as it is in the ceiling.
In a lot of countries they don't put earth on those lighting circuits.
Well done guys that was a bad job to have to deal with 💪🔥
Well done with the rodding too great job
What MF box/connectors was used to re-join the 6mm cooker circuit in the ceiling?
With chip board flooring you can buy a disc cutter hole saw, and make good with the plastic discs which set in the bevelled edge the hole saw makes
Armeg do a brilliant kit, for this, well worth the money.
@@paulf2529 that’s the one mate 👌
If I was there I’n that situation with the missing cpc I would have put a cable locator croc lead on the cpc at one end and go and find where the cpc stops giving a magnetic field and there’s going to be the fault however it will only work if the cpc is completely disconnected like it was in your situation but if it’s connected but your looking for a poor connection it won’t find it that way because it will still have some kind of continuity
Love the old Drummond tester
Great film, John and Ruben are a great team. What has happened to Cory? Ruben with John and very little of or no Cory. I probably will not get an answer, but it’s all very strange???
It just depends on the job sometimes, Cory helps with a lot of quoting now so its better for Reuben to be on site with one of the other guys 👍🏻
@@artisanelectrics Thank you for your reply, much appreciated.
Great job guys 😎
Great stuff John
I'm just going to get a ferrit.
Cuts to Rubin.
😂😂😂
That was emotional
Very!
am I missing something here why didn’t John just go up in the loft like Reuben did or just Reuben to look for the 6mm cable
Watch those ceilings guys because they potentially could contain chrysotile 👍
16.34 he suddenly gets E.T fingers! :-)
great works guys, i had that test set back in the day , can't remember what they were called. Best thing about them was the fact they put a load resistive load on when testing.
Just remembered the name of the test gear , i think it was "drummond"
Rube: "chef's kiss" 😂
chin up Chap.
always a nightmare with domestic.
literally house bashing
Why don't you just feed the boiler from a spur off the immersion heater circuit seems like a more secure circuit anyway
was thinking the same, boiler faults aren't going to take out your sockets then
@@havoctrousers was thinking more that a fault on the socket circuit won't take out the heating but good point too
That foam above the old fused switch looked like it was doing airtightness work. If you just cut it out and yanked the wires through without replacing/resealing then that's why electricians shouldn't be allowed to mess with buildings - they ruin the airtightness. It's fair to say that plumbers aren't much better.
What the hell is "airtightness" haha
What are you going on about? Airtightness 😂😂😂😂😂😂
@@goodplacereviewer2495 In April 2002, the UK government introduced air tightness testing alongside the Building Regulations law to enforce standards of dwelling air tightness. The legislation was created in order to lower running costs, verify the standards of materials, prevent uncomfortable drafts and "avoid condensation problems".
There was a tumble drier in that small room.
One trade messing up another ones work 😂😂😂😂😂😂
Anyone know what inspection camera that is? Or recommend one?
Ferret camera
People's houses are _properly_ grnarly and nasty. In England, at least.
Late in the day issues we all know your pain. Brilliant fault finding John 😉Ruben you could start your own drilling services😂
Brilliant video
Another funny guy from
Artisan electric and comedic services
if there is a flame symbol it is calling (on)!
“whats that bit of copper string run alongside the red & black in the cooker cable for?”
“I dunno, just decoration, I don’t think we need concern ourselves with it, I always just cut em out”.
“Ok Dave” snip……
Drilling artex ceiling with no mask on and dust everywhere, most of the artex up till 90s contains asbestos ,jointing cooker cable out 🙄 high load circuit on non accessible jb not best practice and immersion heater should be on its own circuit , something in regs about heater with so many litres should be on its own circuit
Wow that shower was loud.
Poor John you get all the "interesting faults"
Reubens a good looking fella!
This is why I hate houses, I'd rather bend and gland an impossible 240 entry on my own with one arm.
Ruben's got an apprentice? 🤣
Sometimes it just pays to stay in bed. We have all been there socket on the other side of the bedroom no problem then you find it CHIPBOARD FLOORING NOOOOOOO.
😩😩
Test Comment
Test reply
6:08 it should'nt happen to a spark.
Everything job in this video shows why house bashing is a nightmare
10:29 😂
super.congrats
whats happened tom nagy ?
Why do you only say “like and subscribe “ and not comment as well?
So your have changed the consumer unit and re-energised the cooker with no earth then you turn the shower on to test the red for a fault? More of a cowboys kiss than a chefs kiss if you ask me.
Another fine example of why water and electricity don't mix. LOL
Buy fluke 2042 to search cable
Thanks we will have to buy one and do a video about it on @tools4sparks
Drilling artex without masks?!!! This is why electricians should go on asbestos awareness courses 😉 Please take your health more seriously guys! If you aren’t aware of the risks, get on some courses - you’ll regret it later in life if you don’t.
Great video as always guys but please be careful.
Was just going to say the same plus where is the asbestos report?
Yeah. I made a lot of holes in this house's ceilings before realising that they were still putting asbestos into the Artex until the 1980s. Grumble. Hopefully I won't die of it.
@@xxwookey haha a serious breach of H&S law. You might not die of it but you could loose your liberty for a bit. 👍
@@xxwookey might have missed the part when he said it was his own house? And the apprentice was his son and he wasn't posting a video for his employer. And indeed since he was carrying out the work on behalf of his employer he would have required a risk assessment and method statement including the asbestos report. Shadow vac.
And let's not forget he contaminated the property with dust that should have been properly cleaned.
Site manager and I deal with this everyday, so yes h&s law was broken 😂
@@derekwatt2767 Ah. Some crosspurposes there. I was talking about me drilling holes in my ceiling before realising that artex still had asbestos in it. You are talking about the Artisan chaps, who are indeed 'at work'. Fair enough, no disagreement there.
Some jobs just wont die
lol
Z02FF21730