Best Budget Front Lip for the 22+ VB WRX

Поділитися
Вставка
  • Опубліковано 3 гру 2024

КОМЕНТАРІ • 56

  • @chubbz9977
    @chubbz9977 Рік тому

    Just received my overlays for my 2023 GR86. Wanted to say thank you so much for the fast delivery time. They look great on the car!

  • @Subi_doo
    @Subi_doo Рік тому

    Tip: drill with the clutch set to the Lowest setting. Once the screw bites, it’ll likely act against the clutch and the chuck will stop spinning preventing over tightening. The you can either put the trigger and set it on or use hand tools

  • @Will-hs2um
    @Will-hs2um Рік тому

    I think if you were to color match the fog light housing on the bumper and the ends of the lip leaving the center portion black would look chefs kiss!

  • @TheBeeWolf
    @TheBeeWolf Рік тому

    Sold my WRX almost a year back but still love watching your stuff, homie. Great idea with a three part lip. May have to look into on for my ISF!

  • @Rad1oD3mon
    @Rad1oD3mon Рік тому +1

    I'm telling you Kevin, these car dealerships out her in Cali don't care at all. When I got my WRX, I asked them not to drill front license plate holes (they did anyway), asked to have the car clean upon pick-up (thing was so dirty I had to take it to get a wish right from the dealership). So yeah, you have the Cali car enthusiast mindset, it is what it is lol.

    • @KevinVo
      @KevinVo  Рік тому

      Yeah, it's crappy to see 😔 oh well! Could be worse.

  • @jayjaysan4955
    @jayjaysan4955 Рік тому

    You should get the AFD gr86 front lip, even with the 3p design, it looks insane!

  • @diallo1347
    @diallo1347 Рік тому +3

    I'll never get the whole lowering and installing a lip. Its only a matter of time before it get knicked and it doesnt really add anything to the car, imo.

  • @Ricardo.rsrz86
    @Ricardo.rsrz86 Рік тому

    Kevin The GOAT fr!

  • @warlockd8660
    @warlockd8660 Рік тому

    Super dope! Got all excited for the new content😅

  • @jimmywen2105
    @jimmywen2105 Рік тому

    Hey Kevin , are you gonna paint match all the cladding ? . VB looking good !

  • @momoknows
    @momoknows Рік тому

    Great Job Brother from a 2021 STI owner Looks Good

  • @ianfairbanks1318
    @ianfairbanks1318 7 місяців тому

    install a Hood scoop intercooler protector.

  • @WRX_Panda
    @WRX_Panda Рік тому

    Looks great. I'll be adding this to my VB soon. Cant wait to see what will you do next to the VB.

    • @KevinVo
      @KevinVo  Рік тому +1

      Thanks for watching!

  • @scottherrington8726
    @scottherrington8726 Рік тому

    Glad to see you bounce back from subiespeed...love your videos, I bought my subie after watching your UA-cam videos with subiespeed...keep on keeping on dude

    • @KevinVo
      @KevinVo  Рік тому +1

      Appreciate the support!

    • @WRX_Panda
      @WRX_Panda Рік тому +1

      Im a new member but watched some of the old videos and came across the subiespeed split vid. @kevinVo sure has been a legend and not letting things stop him from doing what he loves. I cant wait to see what you do in the next 8 years! Lets help him get Driven Media up there with all the best resellers!

    • @scottherrington8726
      @scottherrington8726 Рік тому

      @@WRX_Panda yes sir

  • @joestasi8329
    @joestasi8329 Рік тому

    Ugh, I drilled through my side skirt, working on fixing it. I like the lip!

    • @KevinVo
      @KevinVo  Рік тому +1

      Sorry to hear that! Hope you get it fixed soon!

  • @Joe_Av
    @Joe_Av Рік тому

    Looking sharp!! Making me consider the AFD lip for my GR86👍

    • @KevinVo
      @KevinVo  Рік тому

      Definitely look into it!

  • @kenvasquez3604
    @kenvasquez3604 Рік тому

    thank you 4:16

  • @doingmorewithless2401
    @doingmorewithless2401 Рік тому

    Most realible subie ever made 🔥

  • @lnewf8221
    @lnewf8221 Рік тому

    Im waiting to see more videos for the WRX!!!

    • @KevinVo
      @KevinVo  Рік тому

      Lots more to come!

  • @waybach
    @waybach 6 місяців тому

    Glad to see you didn’t “Tap” out 😌

  • @DynamicistDante
    @DynamicistDante Рік тому

    Replacing the lip every other year is part of my routine maintenance. LoL

  • @JJRod225
    @JJRod225 Рік тому

    Hey Kevin! Hope all is going well with you brother! Bro! I need your opinion?

  • @EdwardSteadfast
    @EdwardSteadfast Рік тому +1

    I Can’t do the 3 piece lip. Seems bug me. 🤷🏼‍♂️. Not bad from 5ft.

    • @KevinVo
      @KevinVo  Рік тому

      Completely understandable!

  • @kchan333
    @kchan333 Рік тому

    no automotive double sided molding tape?

  • @adamshomo3354
    @adamshomo3354 Рік тому

    Lip looks great, the front plate bracket is really throwing off the vibe though, sucks the dealer most likely drilled into the bumper to install that. Maybe a plate delete would cover it? Either way looks a lot better with the lip. Looking forward to what’s next for the WRX

    • @KevinVo
      @KevinVo  Рік тому

      Unfortunately I have to run a front plate so I may as well use it now that it's installed into the bumper.

    • @adamshomo3354
      @adamshomo3354 Рік тому

      @@KevinVo ah fair enough, sorry Kevin, didn’t realize you had to use a front plate.

    • @TimothySmith
      @TimothySmith Рік тому

      I don’t have my plates yet and my state requires front. Thankfully the dealer didn’t install the bracket that screws into the bumper. Should I go for a Grimmspeed towhook relocation kit or something similar?

  • @mrch33sehed93
    @mrch33sehed93 Рік тому

    Man....I hope you let the dealer know or don't go back. That's too many issues for me to go back and get anything from them. Good luck on future projects! 🙏

    • @KevinVo
      @KevinVo  Рік тому

      Not worth the hassle as they're back in Cali haha thanks!

  • @sebastianmata7967
    @sebastianmata7967 Рік тому

    Isn’t the same as the eBay I read the buy a lot from there and sell for more is it true ?

    • @KevinVo
      @KevinVo  Рік тому +1

      I don't have any experience with the Ebay lips so I couldn't tell you. I was happy with the AFD lip though in terms of quality and fitment. At the end of the day it's your choice to purchase from who you're comfortable with.

  • @strawhatpirates4038
    @strawhatpirates4038 Рік тому

    those plastic fenders need to be paint match

  • @chopstickx5504
    @chopstickx5504 Рік тому

    does the king respond😮

    • @KevinVo
      @KevinVo  Рік тому

      I don't know about the king, but I respond 🙃

  • @NBNxRandy
    @NBNxRandy Рік тому

    They always say you can buy replacement parts but so far thats been a lie on multiple things they sell.

  • @RobGomez
    @RobGomez Рік тому

    OMG KEVIN I LOVE YOU! GREAT VIDEO AS ALWAYS SIR!!! IM YOUR BIGGEST FAN KEVIN! PLEASE NOTICE ME 😍🥰😘😤🥵😮‍💨🤧🏎️

  • @holeshot26
    @holeshot26 Рік тому +3

    take that license plate mount off its driving me nuts! unless you have to run a front tag...🤷

    • @KevinVo
      @KevinVo  Рік тому

      I have to run one 😭

    • @Raiugabe
      @Raiugabe Рік тому

      Next install: passenger side mounted license plate

    • @lordstatic361
      @lordstatic361 Рік тому

      @@KevinVo I heard they’re gonna change the laws in IA soon so we won’t have to run a front plate I would just do the windshield plate for a few more months see if the laws change

    • @waykool698
      @waykool698 Рік тому

      @@Raiugabeno point since there’s already holes in the car.