Restoraton Old Broken 200A Welding Machine Left Behind Many Months From The Scrap Yard
Вставка
- Опубліковано 24 чер 2022
- Restoration Old Broken 200A Welding Machine Left Behind Many Months From The Scrap Yar
welcome to watch the video we restored an old broken welder from behind many months ago, and i restored it to 95% original state. Please support me through Like Comments & Share Thank you 🙏🏻
#NAME?
- Brand WELDARC TYPE MMA200A
- AMP output 200 AMP
- Capacity 8.1KVA
- Current pilot arc 20-200A
- Voltage 220V ± 15% (single phase)
- Frequency 50 Hz
Неужели еще находятся люди, верующие в эту лажу???
Milions, that's why these fake channels keep popping up.
You can clearly see they use paint stripper or some salt solution to make it look more rusty and this is all fresh rust.
THANKIOU
You Need a sand Blast cabinet.
Itu peralatan nya rapi banget👍👍 🇮🇩🇮🇩🇮🇩🇮🇩
Bravo bravo
100% real machine found it in the trash
The box are destroy means old stock.but the parts of welding is fresh. restoration the box only..
Good job frend
👍👍
Another great job bringing something old back to being useful again. Always enjoy watching all your videos. Please keep sharing.
Good ii laa boss 👍👍😊
Muy bien trabajo papá
Good job repairing the welding machine. It looks much better, too. Great work.
I hope over time the workshop will acquire more and more advanced tools and machines. Today, you would need a sandbox and a high-pressure car wash gun. Since your channel is aimed at restoring all sorts of junk, the junk is almost always rusty or dirty. A sandblasting chamber is the first thing you will need.
16:19 Thermal paste wouldn't hurt.
Belo trabalho 👍👍👍 olá do 🇧🇷❤️🙏
Like 👍 👌 👏 🌹 💛 🌹🌹🇮🇷🇮🇷
Does the cleaning solution become thinner?
No i zajebista robota.👍👍👍👍👍👍👍👍👍👍👍👍👍👍❤❤❤❤❤❤❤❤
Ótimo trabalho 👏👏
Perfeito 👏👏
Great work. But I don't understand why you clean and pain the frame if you don't know if the electronic can be repaired.
Сборка нового аппарата, как всегда
Các linh kiện cũ nên thay cái mới, vì trước đó đã sử dụng gần hong rồi sẽ không được bao lâu nữa nó sẽ hỏng
اين هاذا المكان
进回收站的东西散热片上居然一点灰都没有,猴哥造假也太不走心了
What are u cleaning the motherboard with
Fake. With blown up MOSFETS like that I am sure there are another parts shorted besides he did not bother to check the capacitors if they are ok or not.
For the time on use always replace the capacitors.
Смотрю эти видосы ради комментариев. Поражает количество людей верящих что из куска говна облитого кислотной рыгатнёй, с помощью кёрхера и умных щей можно сделать конфетку.
Ad bên Hải Phòng ạ
🤩😍🤩
Of course, he will not give 200 amperes, the capacitors had to be glued to the board
Trabalho top parabéns 💯👍👍❤🇧🇷
bad desoldering wire for this applied new solderwire and flux
soldering skills: 80lvl
Fake.
Çırt
hello, DIY & Crafts editor here how we can contact you? we want to feature your videos at our Facebook page.