There's really no way to make a man in the suit design while also being able to combine from screen accurate individual mechs. The man in the suit look cheats so much to make it work for a person to wear.
Lemme save y'all the trouble the altays megazord is 4,000 dollars ,your essentially paying for a car if you buy this ,it's not worth the money considering there's tons of options for cheaper megazords. Skip this and put your 4000 dollars on a car or house payment.
You're a fool if you think you could get a car worth having for $4,000 and you're lying fool if you think that's enough for a house payment not to mention it's $1,600 now in the States of for order officially
I've thought of getting a hold of the Altaya Megazord build, but I don't really know if I want it. The Altaya Megazord is an exact copy of the Soul Of Chogokin Megazord. It's just larger. If you already have the SOC Megazord, I think it might be an easy pass.
Hi I wanted to find out if your Megazord was having issue with the batteries not holding their charge, specifically the Triceratops and Tetradactyl. Mine stopped charging and I've found comments online with others having similar issues. I think the circuit board on those two might be defective from the factory as they don't seem to charge the battery properly and one parts get very hot when plugged into the usb charger.
Yeah as I was building I ended up with a few batteries that were no good. I actually think it has less to do with the electronics and more to do with the batteries themselves. I think it's either due to poor battery selection or just something innate about batteries of the size required for this because I did replace the battery on the triceratops, but it died shortly after I replaced it so I had to replace it yet again as I was making these videos. I also ended up with a T-Rex that had battery issues. Pterodactyl was fine for me though.
Thank you for using the images from the Zyuranger, daizenshuu book as a direct reference. For all of the action figure reviews on UA-cam, very rarely do the critics actually use photographs, for pieces that are based on live action productions.
I'm really glad you appreciate that! That is also one of my gripes with other channels when they comment on figure accuracy without showing a side by side so I try to always include that when I do any reviews!
Yeah! I'm pretty excited for my fellow collectors that can now pick this up from FanHome. I know the price is still a tough pill to swallow, but for the fans that want it, it's at least available at a direct rather than imported price!
I guess now that the French release is over, that would mean it was successful enough to be brought to other countries. Because initially, they didn't even release it for everywhere in France but only a few cities as a test run, never saw it advertised officially. We knew of that only because someone saw the first magazine in a book store. And if that wasn't a success, they could drop the release in the middle (it apparently happened in some past collection from Altaya). It's a good news for fans where Fanhome can release it (Austria, Germany, Netherlands, UK and US), while Altaya is making it available for Spain and is doing a 2nd run for France (still a monthly release but this should take 21 months now against 2,5 years from the 1st run, though the price has increased).
This looks super cool, but that price tag along with there seemingly being no ratcheted joints makes going through the hurdles to get it seem not worth it. For something this big, I would want more than just friction to hold the joints in place, especially for something that weighs about 16 pounds with the sword and Mastodon shield equipped. Even if it's just going to be something to put on a shelf in a cool pose, and not actually use it as an actual toy.
Tbh I can't wait for someone to do a stop motion transformation like in the show. Working with a forced perspective, it could pass for the same transformation as in show.
Yep I've made a video on it helping to answer some questions on it. I'm super excited for my fellow collectors to be able to get it without the huge mark up!
Haha! I wish! That was the first Haslab and I was too scared to back it at the time. I do wish I would have backed it, but I don't think I can afford the aftermarket cost of it now!
looks amazing! but to over price i could get 10 flame toys kurokay dinomagezord. for 4k it should have fully artticulated , and have bare any issue due the price. i prefer getting the statue
Because I was worried about the figure and not getting parts in the future I ended up buying two of these. I have 1 almost together and one in totes waiting for when I need it.
There's really no way to make a man in the suit design while also being able to combine from screen accurate individual mechs. The man in the suit look cheats so much to make it work for a person to wear.
That's why they used the giant sized toys props and combined with the man in the suit footage in the show to make it work.
Lemme save y'all the trouble the altays megazord is 4,000 dollars ,your essentially paying for a car if you buy this ,it's not worth the money considering there's tons of options for cheaper megazords. Skip this and put your 4000 dollars on a car or house payment.
You're a fool if you think you could get a car worth having for $4,000 and you're lying fool if you think that's enough for a house payment not to mention it's $1,600 now in the States of for order officially
To quote the mayor of Townsville from the powerpuff girls 4000 DOLLARS!!!!!!!! Ahhhh!!! I’m no sugar daddy those days are over
I've thought of getting a hold of the Altaya Megazord build, but I don't really know if I want it. The Altaya Megazord is an exact copy of the Soul Of Chogokin Megazord. It's just larger. If you already have the SOC Megazord, I think it might be an easy pass.
Hi I wanted to find out if your Megazord was having issue with the batteries not holding their charge, specifically the Triceratops and Tetradactyl. Mine stopped charging and I've found comments online with others having similar issues. I think the circuit board on those two might be defective from the factory as they don't seem to charge the battery properly and one parts get very hot when plugged into the usb charger.
Yeah as I was building I ended up with a few batteries that were no good. I actually think it has less to do with the electronics and more to do with the batteries themselves. I think it's either due to poor battery selection or just something innate about batteries of the size required for this because I did replace the battery on the triceratops, but it died shortly after I replaced it so I had to replace it yet again as I was making these videos. I also ended up with a T-Rex that had battery issues. Pterodactyl was fine for me though.
I like how you put in the title "Is it worth it?" as if we still have the opportunity to buy this without paying the scalping prices
That comment aged poorly if you live in America, Germany, the Netherlands, Austria and Britain.
Fanhome is offering it now
Yup just subscribed to the megazord on fanhome. I feel bad he paid $4,000 😬😬😬
Thank you for using the images from the Zyuranger, daizenshuu book as a direct reference. For all of the action figure reviews on UA-cam, very rarely do the critics actually use photographs, for pieces that are based on live action productions.
I'm really glad you appreciate that! That is also one of my gripes with other channels when they comment on figure accuracy without showing a side by side so I try to always include that when I do any reviews!
Great review! Do you think they’ll do the Dragonzord? Or even crazier, Titanus?
This just announced an American release. But sticker price is still more than 1700 bucks depending on which subscscription you get.
Yeah! I'm pretty excited for my fellow collectors that can now pick this up from FanHome. I know the price is still a tough pill to swallow, but for the fans that want it, it's at least available at a direct rather than imported price!
I guess now that the French release is over, that would mean it was successful enough to be brought to other countries.
Because initially, they didn't even release it for everywhere in France but only a few cities as a test run, never saw it advertised officially.
We knew of that only because someone saw the first magazine in a book store. And if that wasn't a success, they could drop the release in the middle (it apparently happened in some past collection from Altaya).
It's a good news for fans where Fanhome can release it (Austria, Germany, Netherlands, UK and US), while Altaya is making it available for Spain and is doing a 2nd run for France (still a monthly release but this should take 21 months now against 2,5 years from the 1st run, though the price has increased).
This looks super cool, but that price tag along with there seemingly being no ratcheted joints makes going through the hurdles to get it seem not worth it. For something this big, I would want more than just friction to hold the joints in place, especially for something that weighs about 16 pounds with the sword and Mastodon shield equipped. Even if it's just going to be something to put on a shelf in a cool pose, and not actually use it as an actual toy.
Tbh I can't wait for someone to do a stop motion transformation like in the show. Working with a forced perspective, it could pass for the same transformation as in show.
thank you for reviewing it.
Fanhome is starting this build in October
Yep I've made a video on it helping to answer some questions on it. I'm super excited for my fellow collectors to be able to get it without the huge mark up!
@@ComicallyToys, they are offering a 12 month subscription and a 2 year subscription, I went with the 1 year subscription at a discount price
@@brian-ok9mdordered mine too. Couldn’t pass it up, been wanting a Megazord for a long time.
@@brian-ok9md Did you get your kit(s) yet? If so then how is the build? If not, then how much longer do you have to wait?
You should compare it to the HasLab Unicron.
Haha! I wish! That was the first Haslab and I was too scared to back it at the time. I do wish I would have backed it, but I don't think I can afford the aftermarket cost of it now!
There is a Megazord Super Robot Chogokin that is almost 5 inches tall which is really small than that gigantic Megazord
Holy shit 4k 😅 hopefully we get a haslab one one day
just got one for 450€ (france) glad to get one for this price. I would nerver pay more than 800€ for this.
Disappointed that the end result is a very finicky mess. This model kit had much promise.
looks amazing! but to over price i could get 10 flame toys kurokay dinomagezord. for 4k it should have fully artticulated , and have bare any issue due the price. i prefer getting the statue
why does my 1993 megazord sword have a rounded tip?
Because children
@Daikon_Micucci well I mean almost all versions I see are pointy, but mine isn't. what version do I have? I got it in Wisconsin
Where can I get one
Fanhome is distributing the kit to more markets
this barely should have any issues for pricepoint.
希望后续出龙王凯撒跟腕龙合体
Because I was worried about the figure and not getting parts in the future I ended up buying two of these. I have 1 almost together and one in totes waiting for when I need it.
🎉🎉🎉🎉
youre missing two
hottoys , or threezero shoud make a megazord.
Big boy.
almost 5000 for this
i will pass . i am happy with kurokai flametoys megazord.
soc is the way to go