To everyone wondering about the sticker film he used how you can do it your self, it's called water slide transfer film same stuff that you get on a little sheet with all the decals inside of a scale model car,truck or airplane kit, you can buy the blank sheets of it at hobby lobby or online and you litteraly put it into your printer and print the decals and what ever else you want onto it then cut around each decal don't have to be precise because the excess around the printed decal is clear and it's very thin thinner then your hair and you use a bowl of cool water and let them sit in there for a minute or so until the slide off the backing paper easily with your finger or tweezers for super tiny ones, then you just place it on the body where you want it and let it dry and it's done, I recommend using decal set solution for water slides so they confirm to curves and adhere to the body better it just makes the decal even thinner it's called decal-,sol it's a clear bottle in the model car section at hobby lobby it's a decal setting solution. you can also print the decals out backwards that way you can place them inside the clear body before paint then once you got all the decals in the lightly paint over them with thin coats until completely covered. I like to use my vynil cutter on my bigger rc car bodies or my cricket which ever one and use actual vynil sticker material same you can buy it at hobby lobby in small rolls for rc car size decals and I will cut my lettering out opposite and you can do up to three colors if you want for your numbers or letters like the background shadowing of them and then just stick the lettering and numbers to the inside of the rc car body then go about painting up your body then remove the vynil lettering and numbers then paint the lettering and numbers last the color you want so that way your lettering and numbers and ECT are actually painted on the body and not just decals that will come off I don't this way or the water transfer paper way on inside of my ,1/10 scale bodies for carpet road course and oval racing
@@luvdirt I was just saying you can use water slides as well and to print white well if your using paper that is litteraly just white sticker paper you print onto it and the white of the paper is the color white and you just cut out your decal with scissors and exacto knife perfectly around it. It that's why I like to use real vynil and a vynil cutter
That dual shock setup sure does make it ride like a udr and considering the size and weight you would expect a really bouncy stiff suspension but they did good with a soft spring and basically the dual shocks rebound is holding the height of truck!!! I'm very impressed 👏 👌
Thanks for your comment! The suspention not only look good,it also provides a ton of adjustability,accomadating various vehicle weights and weight distributions.
This will probably be my next purchase I’ve never tried Orlando hunter before but I feel their product for be small scale is underrated definitely deserves more attention
It is small, with rather limited performance and is very expensive when you see what you can buy in larger scales for the same cost...BUT...this video perfectly demonstrates that despite this, it is beautifully engineered, it behaves in a very scale-realistic manner, it is clearly huge fun and despite the drawbacks, I still want one! This is a great advert for the product, more so than the official videos made by Orlandoo-Hunter!
That's right，for such a small RC car,it is really difficult to observe the stances and motions with naked eyes,it's only beautiful in slow motion.The assembling process is also a pain for most people ,and the price isn't cheap neither,but it's fun to make this video.Thanks for watching!
@@panaerial9167 Well, inspired by your build, I decided to get one of my own. I also wanted to replicate a real trophy truck and went with an orange/black colour scheme and RPM Offroad decals. I also found a driver figure. Check out my build at channel, BlackSeaRC.
It's nearly stock Orlando OH32X02 kit,I only upgraded a set of metal shocks、a metal dreivshaft、custom made a set of toyota stickers,and slightly decreased damping on the dampers.I will update other mods on the front suspension which added front arms up and down travel later.
amazing job! body looks amazing! any chance you would be willing to share the file for the decals so I can get a set printed locally? I've had my eye on this model and I think it's going to be my next purchase
with being small like this id like to see some metal drivetrain plastics break way to easy on these small machines its worth the extra cost for durability
You mentioned previously you'd share your custom decals. Any chance you can upload a PSD/file somewhere and update the description with a link? A video on the tamiya colors you used would be super helpful too - inspirational video!
I live in Chnia, I bought this in Taobao.com last year shortly after it was released.I contacted the Orlandoo Hunter company and asked where to buy the kit outside China because so many people have asked about where to buy it,they reply me with some certain links where they are preparing to deliver their products to,so I believe you can check out the descriptions of this video to visit those links in order to get further infomations. Due to the very complicated making process of the roll cage,they might be available in couple of weeks or so,I hope these infomations can help you!
You can also go to hobby lobby and get water slide transfer paper what we use for the decals on model cars same stuff and you just print your logos onto it at home with a printer and then cut Emm out let it sit in a bowl of cold water for a few minutes then they will just slide off the backing paper as a really thin clear film with your decal printed onto it and don't have to cut it out precisely because it's thin clear film you will never see the excess around your decals, it's the same stuff they use to print decals for scale model cars that you get in the kits same stuff I use it all the time to make custom decals for my scale models and even my carpet track rc cars I have reversed printed and stuck them to the inside of the rc car body before paint and it worked amazing to keep them from every coming off while racing, I run indoor carpet 1/10 scale road course and oval cars I got a video of me racing my rj speed legend car on my page, it's a really close race we was all a thousands of a second the top four was for almost half the race fighting for the lead lol.
You can buy a cricket it's a vynil cutter and you do layers of each color till you get two or three layer color lettering and numbers and simple logos, I have a 50 inch vynil cutter for doing all the lettering and numbers on my real racecar, keyword here is cutter not printer it doesn't print it has a blade that cuts the vynil to shape and size of whatever you want it's called a vynil plotter really is all the cricket is. Good luck
I bought this in Chnia,Taobao.com.You can checkout the links in the description to get this kit,it's gonna be available soon!For the price,it costs about 150 dollars in China,with Hop-Up shocks and rear drive shafts,ESC,servo.But doesn’t include trannsmitter and reciever.It may vary in different countries.
@@ParRagon- That sounds familiar! I have been building RC kits for years and was prepared for a challenge. I thought there would be the odd tricky moment during the build but as it turned out, it was almost every build step. Sometimes I had to just walk away and come back another day. Super frustrating, especially when parts don't line up as they should. As for parts, there are plenty of sources, not just AliExpress.
@@BlackSeaRC yea exactly xD ive needed over an hour for the Front Plate which holds the stabilisator to be able to screw the First fastener 🤦 that was the biggest torture xD but the best Thing to calm down as ive build this Truck while my GF was With our 13yo son in the Hospital cuz He had an epileptic seizure. ( Not that day tho ) ( Im uploading a video right now, had to download it from my tiktok acc cuz couldnt find in my Files anymore xD )
I have a small question! How do you make the transparent stickers ? Am trying to make some for a build of mine but I can’t find any way to make custom ones.
Just get you a cricket vynil cutter and boom just double a tripples later the vynil to get multi color lettering and numbers or you can also get something called water slide transfer paper it's what we use for the decals on scale model kits you can buy the blank water slide paper from hobby lobby as well it's usually in the model section with the cars and models, specialty paper section, vynil section where all the stuff for the cricket is with all the little rolls of vynil film for cutting out decals and stickers. And the water slide transfer paper you print on it with a printer and then just cut close to it doesn't have to be perfect cuse rest is clear film so you won't ever see the excess around the logos or numbers and lettering hope this helped
Thanks! This is printed on a material called UV, and it's a transfer sticker,when put on to the body,peel off the top clear sheet,then only the characters are left on the body.
I’m looking for these on like eBay and stuff and I’m seeing some for like like 140 bucks and then I’m seeing some for 280 which one do I need to get for that proper one?
What you are probably seeing is one which is just the kit only and the other has the electronics as well. There are various different packages available with different configurations of electronics. These micro trophy trucks are not cheap to build! If you are interested, I have a series of videos on my channel, BlackSeaRC, showing my own custom build.
To everyone wondering about the sticker film he used how you can do it your self, it's called water slide transfer film same stuff that you get on a little sheet with all the decals inside of a scale model car,truck or airplane kit, you can buy the blank sheets of it at hobby lobby or online and you litteraly put it into your printer and print the decals and what ever else you want onto it then cut around each decal don't have to be precise because the excess around the printed decal is clear and it's very thin thinner then your hair and you use a bowl of cool water and let them sit in there for a minute or so until the slide off the backing paper easily with your finger or tweezers for super tiny ones, then you just place it on the body where you want it and let it dry and it's done, I recommend using decal set solution for water slides so they confirm to curves and adhere to the body better it just makes the decal even thinner it's called decal-,sol it's a clear bottle in the model car section at hobby lobby it's a decal setting solution. you can also print the decals out backwards that way you can place them inside the clear body before paint then once you got all the decals in the lightly paint over them with thin coats until completely covered. I like to use my vynil cutter on my bigger rc car bodies or my cricket which ever one and use actual vynil sticker material same you can buy it at hobby lobby in small rolls for rc car size decals and I will cut my lettering out opposite and you can do up to three colors if you want for your numbers or letters like the background shadowing of them and then just stick the lettering and numbers to the inside of the rc car body then go about painting up your body then remove the vynil lettering and numbers then paint the lettering and numbers last the color you want so that way your lettering and numbers and ECT are actually painted on the body and not just decals that will come off I don't this way or the water transfer paper way on inside of my ,1/10 scale bodies for carpet road course and oval racing
Thanks for your axplanations! well It‘s not water decal though,just transfer stickers.
Great explanation. Can you tell me how white was printed on the clear film? I can't find a white toner printer without spending over 2k
@@AxANGRYxPANDA Sorry,I didn't print them myself,I used online Printing service here in China,they use industrial grade printers.
Definitely not water slide decals as he has explained. You can tell it was done with a pricey pro printer.
@@luvdirt I was just saying you can use water slides as well and to print white well if your using paper that is litteraly just white sticker paper you print onto it and the white of the paper is the color white and you just cut out your decal with scissors and exacto knife perfectly around it. It that's why I like to use real vynil and a vynil cutter
That dual shock setup sure does make it ride like a udr and considering the size and weight you would expect a really bouncy stiff suspension but they did good with a soft spring and basically the dual shocks rebound is holding the height of truck!!! I'm very impressed 👏 👌
Thanks for your comment! The suspention not only look good,it also provides a ton of adjustability,accomadating various vehicle weights and weight distributions.
@@panaerial9167i don't want to build one.. sell me yours? lol
Agreed! Blown away by the functionality at such a small scale..must have!!
I need this in my life.
Quite an amazing Kit,I love it so much!
@@panaerial9167 It really is, looks great.
Me tooooooooooooooo
@@scientificbhaiya9336 check the links in the description to get more info abnout the kit,it's gonna be available soon!
@@panaerial9167 It won’t deliver to my country. Sadly
looks spectacular, great job! Amazing that a vehicle in this scale could show so much realism.
Thanks!
I say it looks about as realistic as the UDR when driving. Which is amazing considering how much smaller this car is.
Yes,for such a small scale RC car ,it's quite realistic both in structure and in the suspension movements,it's specially beautiful in slow motion.
Paint and stickers game are on point
I NEED ONE JUST LIKE THIS IN MY LIFE!!! Such a nice build!
Wow...stupendo ...spettacolare con queste grafiche !!!... ciao dall'Italia
The suspension works incredibly well!
Thanks！
What a cool little trophy truck! The suspension action is so realistic and the Ivan Stewart livery you made is soo sick!! Really nice job on the body!
I'm sure this video inspired many people with builds of their own. I went with the RPM Offroad/Geiser Bros graphics on my customised trophy truck.
Wow! That is so impressive! I need one asap!!!
This will probably be my next purchase I’ve never tried Orlando hunter before but I feel their product for be small scale is underrated definitely deserves more attention
It's small,but not simple,worth a try.
Those tires look rock hard.
That's something I can do nothing with.😅
That's my favorite baja truck design!
I love it too, resembles the real thing more then any other kit in the market,even better then those big scales.
@panaerial9167 yeah, I wish they made one for the baja rey
This is awesome!!!!!!!
it looks like a mini Traxxas UDR :O
It is small, with rather limited performance and is very expensive when you see what you can buy in larger scales for the same cost...BUT...this video perfectly demonstrates that despite this, it is beautifully engineered, it behaves in a very scale-realistic manner, it is clearly huge fun and despite the drawbacks, I still want one! This is a great advert for the product, more so than the official videos made by Orlandoo-Hunter!
That's right，for such a small RC car,it is really difficult to observe the stances and motions with naked eyes,it's only beautiful in slow motion.The assembling process is also a pain for most people ,and the price isn't cheap neither,but it's fun to make this video.Thanks for watching!
@@panaerial9167 Well, inspired by your build, I decided to get one of my own. I also wanted to replicate a real trophy truck and went with an orange/black colour scheme and RPM Offroad decals. I also found a driver figure. Check out my build at channel, BlackSeaRC.
I never knew about this badass little truck , now I gotta make a mini version of my udr 😭😂
Nice job on the livery.
Thanks！
Reminds me of the Famous Mickey Thompson!! Toyota Team. Great job on your 🎥!!!
Yep,Ivan "Ironman" Stewart!
Beautiful truck and video
Thanks !
Very interesting! Looking forward to this release
Nice job for body paint 👌
Thanks!
Wich printer are you using to print decals.
Thanks so much for your help!
Veeery nice job, love it!!!
I didn't print it myself,I used online print service here in China
Omg I need this it look almost exactly like my traxxas udr
And this is RWD😁
Wow it's beatiful video!!!!!
Thanks!
Cool videos my friend. Greeting from South Texas.
Thanks my friend!
Totaly insane😎 i need a making of which Chassis, which Body and all the mods U did on it.
It's nearly stock Orlando OH32X02 kit,I only upgraded a set of metal shocks、a metal dreivshaft、custom made a set of toyota stickers,and slightly decreased damping on the dampers.I will update other mods on the front suspension which added front arms up and down travel later.
I just got one ~ based solely on this incredible video.
Me too! Better than the official Orlandoo Hunter videos!
This video is so satisfying to watch the rc looks so amazing when played in slow motion loved watching how the wheel flex and movement of the wheels
Thanks!That's what I'm trying to do.
@@panaerial9167 well count me in I just subscribed to your channel
OMG what a great!!! thing~~
To say that the tires aren't really soaking much... that suspension is dialed in
Yes,mainly depending on the suspensions.
Thats ba! Exactly the build I wanted to do..
I also built one of these but mine is based on the black and orange Geiser Bros trophy truck. Check it out at BlackSeaRC.
great presentation!
Thanks!
that is sick I want one now
It is worth the price!
Это просто шедевр! Восхитительная машина! Как она по надёжности?
Thanks！I think it's designed with alot of thoughts both in the building process and reliability,but it sure cannot take a 1/10 scale beating.
Excellent! But this video makes me mad that I still can't buy one! What takes them so long?
The roll cage is extremely difficult to fabricate,because it's so tiny butstill needs some strenth.
amazing job! body looks amazing! any chance you would be willing to share the file for the decals so I can get a set printed locally? I've had my eye on this model and I think it's going to be my next purchase
You can leave me an Email address.
Whats the name of this model?
@@panaerial9167 I think UA-cam does not allow comments with email addresses and removed my comment.
Would really like these also, somebody else tried to post their email and it didn’t work
Woahhhh what is this mini traxxas udr yes please.
That's so freaking awesome I want one really badly, how much are they going to cost?
it costs about 150 dollars in China,with Hop-Up shocks and rear drive shafts,ESC,servo.But doesn’t include trannsmitter and reciever.
Nice vid 😎
Thanks !
Amazing!! Where do you get that body!???
Sweet truck
Yep,bouncy and juicy😄
That's amazing!
Thanks!
Mini UDR 😊
Curious what you did to increase travel in the front end. I have the same kit and it's amazing
Alright FINE. I need one.
Sehr sehr nice 😍👍
You should put some heavier shock oil in the shocks so it doesn’t bottom out as easy
Thanks for the advice!
Great video!
i need one of these NOW!
check the links in the description to get more info abnout the kit,it's gonna be available soon!
that thing is sick!
That was dope
Thanks!
Want, the cat will never be the same.
Clave, muy fachero quedo, 10/10
You’ve earned a sub!
Thanks !
No problem
with being small like this id like to see some metal drivetrain plastics break way to easy on these small machines its worth the extra cost for durability
They have come up with a new metal servo saver,more metal upgrades might also come.
I need this!
You mentioned previously you'd share your custom decals. Any chance you can upload a PSD/file somewhere and update the description with a link? A video on the tamiya colors you used would be super helpful too - inspirational video!
Have you seen the Toyota short course truck decal set sold by MCI Racing?
J'en veux un aussi s'il te plaît! 🤗
Amazing work! Love ur truck! 🤩😍
Thanks!
So cool....did you build the whole thing from scratch? is it a kit?
Yea it’s a kit. It’s in the title
@@Jackie-wg5dy might want to read the title again wise guy....it's not in the title I'm reading...
@@andyb9994 yes it is 100% wise guy🤦♂️
It's a kit,check the links in the description to get more info abnout the kit,it's gonna be available soon!
Hey Aerial, awesome paint job sir. Would you be interested in doing a body for me? PM me if so. Thanks.
What body did you use? Truck looks great
It's the kit's stock body,I custom painted it.
I got the Losi mini trophy truck it’s awd tho and much faster But this one has much smoother suspension forsure
Yes this is more realistic in the suspension construction.
Sick
Where did you get it? The only place I see if for sale is on aliexpress, but im not sure how much I trust that.
I live in Chnia, I bought this in Taobao.com last year shortly after it was released.I contacted the Orlandoo Hunter company and asked where to buy the kit outside China because so many people have asked about where to buy it,they reply me with some certain links where they are preparing to deliver their products to,so I believe you can check out the descriptions of this video to visit those links in order to get further infomations. Due to the very complicated making process of the roll cage,they might be available in couple of weeks or so,I hope these infomations can help you!
Absolutely EPIC!!!!!
Thanks！
when is it coming out?? i will have to get one!!
About several weeks according to what I've been told.
@@panaerial9167 it looks awesome, might get one
@@panaerial9167 so i just got like the first one 🤣do they come with electronics?
@@Evan-rq2ee Nope,electronics not included in the box
@@panaerial9167 fr? Cause it said it don’t come with electronics for the kit
Excellent paint job and decal placement. What do you use to print the decals?
Thanks ,I used Online printing service,and the material is called UV,its transfer sticker.
You can also go to hobby lobby and get water slide transfer paper what we use for the decals on model cars same stuff and you just print your logos onto it at home with a printer and then cut Emm out let it sit in a bowl of cold water for a few minutes then they will just slide off the backing paper as a really thin clear film with your decal printed onto it and don't have to cut it out precisely because it's thin clear film you will never see the excess around your decals, it's the same stuff they use to print decals for scale model cars that you get in the kits same stuff I use it all the time to make custom decals for my scale models and even my carpet track rc cars I have reversed printed and stuck them to the inside of the rc car body before paint and it worked amazing to keep them from every coming off while racing, I run indoor carpet 1/10 scale road course and oval cars I got a video of me racing my rj speed legend car on my page, it's a really close race we was all a thousands of a second the top four was for almost half the race fighting for the lead lol.
Great build. What equipment do you use to make the stickers?
You can buy a cricket it's a vynil cutter and you do layers of each color till you get two or three layer color lettering and numbers and simple logos, I have a 50 inch vynil cutter for doing all the lettering and numbers on my real racecar, keyword here is cutter not printer it doesn't print it has a blade that cuts the vynil to shape and size of whatever you want it's called a vynil plotter really is all the cricket is. Good luck
@@youknoweverything7643 Thanks
@@youknoweverything7643 it's fine for a real car, but this is way too small. it's just impossible to cut such tiny elements on a plotter cutter.
So badass
Thanks !
I love this
What equipment has the decal printed? Please let me know!
Mini UDR, heck ya bigger brushless motor n ESC
Thanks! I'll try!
K10 be like what’s With all the speed bumps ?
GUNDAAAAAMM GUMPLAAAAA
Ist das ein geiles Teil 😍👌👍
Sweeet man😋💪😎
Thanks!
I wont one! How much and where to buy?
I bought this in Chnia,Taobao.com.You can checkout the links in the description to get this kit,it's gonna be available soon!For the price,it costs about 150 dollars in China,with Hop-Up shocks and rear drive shafts,ESC,servo.But doesn’t include trannsmitter and reciever.It may vary in different countries.
Where can i buy this?
🔥
Where fo you buy these things? I cannot find one anywhere.
Check the links in the description to get more info abnout the kit,it's gonna be available soon! And search "Orlandoo hunter OH32X02"
Aliexpress
I get one !!!
Is this a custom or a new kit
it's a new kit coming out soon.
is it hard to build considering the tiny size? and are parts easy to find since its an ali express based rc?
Hard? I wanted to throw mine into a Wall several Times into the build xD and ive Got plenty exp with building Kits.
@@ParRagon- That sounds familiar! I have been building RC kits for years and was prepared for a challenge. I thought there would be the odd tricky moment during the build but as it turned out, it was almost every build step. Sometimes I had to just walk away and come back another day. Super frustrating, especially when parts don't line up as they should. As for parts, there are plenty of sources, not just AliExpress.
@@BlackSeaRC yea exactly xD ive needed over an hour for the Front Plate which holds the stabilisator to be able to screw the First fastener 🤦 that was the biggest torture xD but the best Thing to calm down as ive build this Truck while my GF was With our 13yo son in the Hospital cuz He had an epileptic seizure. ( Not that day tho )
( Im uploading a video right now, had to download it from my tiktok acc cuz couldnt find in my Files anymore xD )
Ok i need one lol. How much to make one?
Buy the kit. Very simple
Check the links in the description to get more info about the kit,it's gonna be available soon! And search "Orlandoo hunter OH32X02"
Hey, nice job on the decals! Would you be able to make me a few sets of the decals?
Sorry，I live in China,shipping cost would be quite high considering the price of the sticker itself.
Top carro 🚗😃👍🏻
Is this a custom built rc
No,it's a kit.
@@panaerial9167 what kit is it and etc
Need a link where to buy! ;)
I purchased online in China,you can try searching Orlandoo Hunter OH32X02 trophy truck in some online hobby store.
I just got contact with the make company ,check the links in the description to get more info abnout the kit,it's gonna be available soon!
Freakin AWESOME!!!👍🏻👊🏻🔥luv the vid mi familia 🔥💯
I subscribed amazing channel 🤙🏼👍🏻👊🏻🔥💯
Thanks!
What’s the runtime?
260mah 2S battery,runs up to 40mins
@@panaerial9167 wow!! Awesome!!
I have a small question!
How do you make the transparent stickers ? Am trying to make some for a build of mine but I can’t find any way to make custom ones.
Just get you a cricket vynil cutter and boom just double a tripples later the vynil to get multi color lettering and numbers or you can also get something called water slide transfer paper it's what we use for the decals on scale model kits you can buy the blank water slide paper from hobby lobby as well it's usually in the model section with the cars and models, specialty paper section, vynil section where all the stuff for the cricket is with all the little rolls of vynil film for cutting out decals and stickers. And the water slide transfer paper you print on it with a printer and then just cut close to it doesn't have to be perfect cuse rest is clear film so you won't ever see the excess around the logos or numbers and lettering hope this helped
Great job on this body! What printer and paper did you use for the white decals ?
Thanks! This is printed on a material called UV, and it's a transfer sticker,when put on to the body,peel off the top clear sheet,then only the characters are left on the body.
@@panaerial9167 great work. Did you print the decals yourself or did you use a service?
I can’t seem to find this kit on the Facebook
I’m looking for these on like eBay and stuff and I’m seeing some for like like 140 bucks and then I’m seeing some for 280 which one do I need to get for that proper one?
What you are probably seeing is one which is just the kit only and the other has the electronics as well. There are various different packages available with different configurations of electronics. These micro trophy trucks are not cheap to build! If you are interested, I have a series of videos on my channel, BlackSeaRC, showing my own custom build.
looks likes it needs more weight on it
Thanks，I’ll try!
is it 1/16 scale?
half,1/32,total lenth is 168mm.
Do you sell your sticker sheets?
Have the stock shocks or the hidraulic one's
The metal ones
What's an Orlandoo hunter?
It's a brand name,they made this kit and many other small scale kits.
What kit is this?
Literally in the description of the video🤦♂️
Is it controlled by cell phone?
No，just conventional pistol transmitter.