How to make an Electric License Plate Flipper
Вставка
- Опубліковано 11 вер 2024
- at 38:25 I got Freaked out, go to that min marker to see what happened.
Here are some of the things I used for this install
Solenoid
amzn.to/2pSCs6Z
screws for solenoid
4 of these
amzn.to/2llPamz
collars for the screws on solenoid
4 of these
amzn.to/2l9buox
bolts for plate to go on under tail of bike uses stock nuts
4 of these
amzn.to/2mqq4Ig
side screws for bottom of plate flipper
2 of these
amzn.to/2lR0MBH
solder helper
amzn.to/2mCfU4g
Good job. And thank you. I wish I didn’t skip electrical class.
Edit: you should sell these.
Awesome idea and build! I definitely wanna do the same so I can avoid tolls and popo, haha.
Ps, at 46:58 the large lines are centimeters the small lines in between are millimeters. Every 10mm = another cm.
Darn great vid. You did your homework. Best vid out there and I've looked into all of them
Glad it was helpful!
Hey man! I really appreciate your really informative videos! I'm going to get an r3 and I've been subbed for a while now so you're one of my inspirations to get one!
When the suspension compresses it may cause the wheel to hit it
All that work will only hold up for a few days maybe a month if you only ride on Saturdays...
What's the point ... you can still read the plate. It needs to flip completely horizontally
its mainly for riders that dont want to pay the tolls when on the highway
You came through I asked you about this maybe a month or so ago. you said you would work on it...I'll be damned you did it
ya sorry it took awhile but had to start from scratch on this video cuz like i said in the video people on utube are sketchy when they show there plate flipper. plus i wanted this to be my 1k sub video =) i had you in mind when i mentioned it in the video. hope this helps you out. Cheers =)
Love your videos! Pls make a video of the bulb of the license plate! Pls! Greetings from mexico!
ill see what i can do then i will make a video. thank you for the Greetings =)
here is link for your request ua-cam.com/video/QRh1PhUPaUo/v-deo.html
Hi AcProductions. I watch your installation videos and they are really helpful. I was trying to install the headlights on my R3 and removed all fairings back. Now I am not able to put the fairings back, the order and the screws that goes in. Can you please make a detailed video of how to put all the fairing back with closeup. I see that in your other videos you have it partially but not full video of you putting it back (tips and tricks) so that the fairings go without breaking plastic clips
ok yes that older video i was not really able to make any close ups cuz it was old camera, but now i have a very new camera that allows me to do super clear close ups. at what part do u need me to show how to install back>? are you at a point that you have the whole side fairing off and headlight off the bike just need to know how to make the video for you, if u can message me back on details that would be great and ill make a video with close ups for you =)
Hey great video, thank you! Where did you get the metal plates? Also does the switch need to a 12v switch and do the amps matter or can it be any switch? I see the solenoid is 12v and 360ma which is like .03amps i believe.
metal plate from local hardware store and switch is rated for 12v @ 15amps at least.
@@ACProductions77 you can also put the can of spray paint or plastic dip in a pot of warm water for about 10 minutes and it will flow very nicely.
@@Robocoppat good tip thank you =)
I've been thinking about doing something like this for awhile, however just got busy doing other things. I plan on installing this on my bike( for secret reasons 😜). Anyway consider me a subscriber and I gotta say great video. By the way, I want to install (2) sets of blinkers in the front and the rear of my motorcycle. The rear will be a TST INDUSTRIES integrated taillight. And the front is a set of TST INDUSTRIES flush mounted l.e.d. blinkers. How do I wire my rear stock blinkers to come on at the same time as my taillight ( with built in blinkers)?? Same question for the front. Thank You
there should be a extra wire with the tst tail light for the blinker dept. I have a video of when i had installed my tst rear tail light , click here for that video>> ua-cam.com/video/oTDyarcdKTI/v-deo.html
Also I noticed that you broke the 4 screw attachment behind your headlight assembly and you attached it via some glue? I also have the same problem. I broke all 4 headlight assembly screw holders (those plastic ones) and due to that I cannot attach the headlight back to bike. What plastic glue material you used so it holds it up tight and wont come off when attaching the fariings back. Please help, I dont want to spend 400$ for the headlight assembly kit for my 2015 yamaha r3
yes actually the screw mounting holes where broken cuz i had an accident back in nov of 2015. I used a apoxy called SHOE GOO along with a metal spacer and a plastic tube that was alittle bit smaller then the screw so i could thread in the screw. i had alot of broken parts to that headlight and just used alot of that shoe goo to repair it all and so far no problems
here is a link to the apoxy i use for most of my installs amzn.to/2m5nSEC
It will just touch the tire while riding...
Dyno jet on a 300? 🤔
squeezing out every bit of power that i could get
60 minute video- and he has jump cuts to hide that it doesn’t work. Sad. “I don’t keep secrets”
Gloves man... Gloves...
Wow you are so cute.
You are so cute 🥰