You made a subscriber out of me brother! I haven't ran my Savage x converted to an XL or my MGT 8.0 In over 2+ year's. Been trying to get back into it. But, running a trucking business is hard. Good video!!!
Thank you very much and welcome!! Seems like you have some really nice nitro's I love the Savage. Hope you get time to run them again. Thanks for watching.
im amazed just a pipe can make that much difference! may have to look into it. Just picked up a brand new revo a couple weeks ago. but im concerned ive been battling an air leak out of the box.
Your Revo is running amazing well!!!🤩 It must be a blast to drive it around 😊 The only thing on your carb tuning that I would want to change is the LSN setting which I would try to set about 5 minutes richer in order to get a cleaner rev down to the idle speed. Before I purchased my Savage xl ,I was undecided between them two and the T-MAXX😅 However,in the end I had took the decision to buy the XL and I"m highly hoping that the XL will be also fun to drive.It"s still waiting after his rebuild to be remaiden😋 Thumbs up for your great Revo ride!!
Thank you for the tips. Savage xl is a great truck too .Mine is broken in but not tuned yet weather has been horrible I'm lucky to make this video. Thanks for watching
@@rcshowoff5427 Welcome Bro!! Yeah I know,you have swaped the LRP Z.28 on it ,I"ve watched the Break-in video of it several times😉 The spring seems to be some kind of lazy this year, I have here the same issue..2 oder 3 days good weather and the rest of the time only crappy weather with rain out there..🤮 Anyway ,as soon as possible I will tune my 1:8 buggy (also with a Z.28 LRP inside) to the 16% nitro fuel because saome idiots here in Europe had decided to ban every nitro fuel with more than 16% nitro and as soon as the buggy is well tuned I think that I will proceed to my Savage XL.. By the way, can"t wait for the next video of your Savage XL,man I love your old style blue bodyshell so much!! I had the 2014 edition,so it has the newer Paintjob design which isn"t so nice as trhe old style.. If you want,I can send you some pictures of mine😎 Thanks for posting!
Your Revo is running great! I'll have a video up on mine soon in my sand pits. I need to work on my tune. I wasn't getting any wheelies but I did do several really clean back flips. Wasn't going as fast as yours though and definitely not pulling wheelies. More tuning needed! Great video as always.
Thank you very much. Back flips are great. Before l did and mods l was able to do wheelies by going about 3mph slam on the brakes then instantly hit full throttle. The suspension bounce should bring the wheels right up..
Thank you l appreciate it. Ripping behind cars is great. Guess l didn't learn my lesson from getting my Infraction run over. Still have ro play in the street.Ha!
It would be even better if you put a OS 11k carb on it. Makes the 3.3 so much better and even opens up the bottom end even more. That pipe is rad too! I want one!
Hi!! the site i sent you to is also the owner of the THS systems. Unfortunately do to the pandemic he told me he dosnt know when Traxxas pipes will be back in stock. l actually bought the last one in stock. The THS exhaust on my Jato he custom built for me for free for getting him the sale from you buying the Jato. Thank you much!!
Yes.. The long travel definitely helps with wheelies. Once you get used to the truck being a little tipsy the long travel suspension is so much better making it a real monster truck. Thank you for watching and commenting.
Ya I know. My local hobby shop is also the owner of the THS pipes. He told me do to the pandemic materials where hard to get. He said hopefully soon he will be making Jato pipes first.
@rcshowoff5427 awesome run! And please let THS know those revo pipes are hard to find and in high demand. I've been searching for months and just found a used one for my new o.s. 21tm. And of course just ordered his header! Thank God he had that in stock
Hello boss. Before nothing great video amd skills for drive 😅. I would like to know what adjust you have in the engine because my one never done those wheelies. Did you fit any metal gear or is from factory, i ask you because I sold my one because every month I needed to fit the new pinion gear and I see that yours goes absolutely brilliant 👌. I loved that truck, but I finished tired to buy every month one pinion gear ( that one that is fitted to the engine). Thanks for your attention 👍.
Hello!! I started with the high speed needle 4.5 turns out then slowly lean it to get the most but always checking temps. I did do the forward only conversion but no metal gears in the transmission. The spur gear is the original stock gear no upgraded gears. I hope some of this info helped you. Thanks for watching.
Sorry for late reply. I installed a forward only conversion in the transmission, THS exhaust system and the long rockers on the suspension. Raising the suspension really helps with wheelies.
Awesome man. I just got a revo about 4 months ago but the front wheels seem absolutely wobbly as hell, when I'm ripping it and I'm in front of it as it's coming towards me I can see the front wheels wobbling all over the place. Does it have something to do with the bearings maybe?
Thank you!! Could possibly be the bearing if it is the wheels will wiggle by hand. If that's not it it could be the way the foams were installed in the tire at the factory. Hopefully you figure it out The Revo really is the best. Thank you for watching..
I own a revo and had the same issue on pavement !! What I did was lower the TSM when driving on the roads. On dirt or grass it’s ok but pavement always gave me wobbles also. Let me know if it helps.
Hello...I also had another revo and that wheelied also. Two things I found it to wheelie. Forward only conversion really brings out the power and the tall long suspension. I also use VP Master Basher fuel. Hopefully this helps.
It's tight but not over tight. I always bench test too make sure there is some slip. I used to tighten it all the way and was breaking the main shaft in the transmission. Learned my lesson on that one.
You made a subscriber out of me brother! I haven't ran my Savage x converted to an XL or my MGT 8.0 In over 2+ year's. Been trying to get back into it. But, running a trucking business is hard. Good video!!!
Thank you very much and welcome!! Seems like you have some really nice nitro's I love the Savage. Hope you get time to run them again. Thanks for watching.
im amazed just a pipe can make that much difference! may have to look into it. Just picked up a brand new revo a couple weeks ago. but im concerned ive been battling an air leak out of the box.
On no.. I had that happen to me . I was going nuts trying to get it running right . The carb was loose. I hope you figure it out. Thanks for watching.
Man you have that thing running like a dream 🏆
Thank you!!
Your Revo is running amazing well!!!🤩 It must be a blast to drive it around 😊 The only thing on your carb tuning that I would want to change is the LSN setting which I would try to set about 5 minutes richer in order to get a cleaner rev down to the idle speed.
Before I purchased my Savage xl ,I was undecided between them two and the T-MAXX😅
However,in the end I had took the decision to buy the XL and I"m highly hoping that the XL will be also fun to drive.It"s still waiting after his rebuild to be remaiden😋 Thumbs up for your great Revo ride!!
Thank you for the tips. Savage xl is a great truck too .Mine is broken in but not tuned yet weather has been horrible I'm lucky to make this video. Thanks for watching
@@rcshowoff5427 Welcome Bro!! Yeah I know,you have swaped the LRP Z.28 on it ,I"ve watched the Break-in video of it several times😉
The spring seems to be some kind of lazy this year, I have here the same issue..2 oder 3 days good weather and the rest of the time only crappy weather with rain out there..🤮
Anyway ,as soon as possible I will tune my 1:8 buggy (also with a Z.28 LRP inside) to the 16% nitro fuel because saome idiots here in Europe had decided to ban every nitro fuel with more than 16% nitro and as soon as the buggy is well tuned I think that I will proceed to my Savage XL..
By the way, can"t wait for the next video of your Savage XL,man I love your old style blue bodyshell so much!! I had the 2014 edition,so it has the newer Paintjob design which isn"t so nice as trhe old style.. If you want,I can send you some pictures of mine😎
Thanks for posting!
Your Revo is running great! I'll have a video up on mine soon in my sand pits. I need to work on my tune. I wasn't getting any wheelies but I did do several really clean back flips. Wasn't going as fast as yours though and definitely not pulling wheelies. More tuning needed! Great video as always.
Thank you very much. Back flips are great. Before l did and mods l was able to do wheelies by going about 3mph slam on the brakes then instantly hit full throttle. The suspension bounce should bring the wheels right up..
Keep tuning your almost there bud 😍👍 a little richer on the low needle and you’ll be there
That was Epic! Wheelies on demand. I have never done a wheelie but about to build an MGT8.0 so fingers crossed
Thank you!! Wheelies are great. Hope your MGT8.0 build goes well.
What a torque monster she is..awesome long road wheelies. I love racing behind cars too lol. Killer rippin dude
Thank you l appreciate it. Ripping behind cars is great. Guess l didn't learn my lesson from getting my Infraction run over. Still have ro play in the street.Ha!
Please give a video on how to set it up HSN,LSN & SCREW NEEDLE 🙏🙏
Sorry I don't do how to video's.
It would be even better if you put a OS 11k carb on it. Makes the 3.3 so much better and even opens up the bottom end even more. That pipe is rad too! I want one!
Thanks man. I saw your video with that carb. Nice upgrade as well. These 3.3 engines have so much potential ldk why people knock them.
@@rcshowoff5427 i know right! The 3.3 is a solid engine when upgraded right!
Epic run dude, really enjoyable. One of my favourite cars is my Slayer. 🤝
Thank you very much. Slayer is the one Traxxas Nitro I don't have hopefully in the future. Thanks for watching.
I love the sound of nitro I need to add one to my collection great video man 👍
Thank you!! Get one if you can. They are a blast. Thanks for watching.
awesome rc and nice run,cool wheelies
Thank you much l appreciate it!!!
@@rcshowoff5427 😁👍
Amazing power and wheelies!
Thank you!
Nice video and well done on the tune!!
Thank you!!
Lot of cool stunts! Like watching monster Jam!
Thank you!!
I looked at the site where you sent me for my Jato. when you got yours. I want the Ths for my new green Revo still in box
Hi!! the site i sent you to is also the owner of the THS systems. Unfortunately do to the pandemic he told me he dosnt know when Traxxas pipes will be back in stock. l actually bought the last one in stock. The THS exhaust on my Jato he custom built for me for free for getting him the sale from you buying the Jato. Thank you much!!
If you remember try to keep an eye out on one for jato with the header and one for the Revo 3.3 please
awesome bash mate..great power
keep going champ🏆
Thank you much!!!
@@rcshowoff5427 enjoy champ..you also welcome to check my new vid😝
The Wheelie monster !!!
Awesome bash great video.
Thank you!!
I think the long travel helps it with wheelies too. I got progressive in mine and it won’t even pop the frontend. Switching to long travel right now!
Yes.. The long travel definitely helps with wheelies. Once you get used to the truck being a little tipsy the long travel suspension is so much better making it a real monster truck. Thank you for watching and commenting.
@@rcshowoff5427 Thanks for sharing I’d like to get my hands of a THS pipe but damn they’re not even availible right now!
Ya I know. My local hobby shop is also the owner of the THS pipes. He told me do to the pandemic materials where hard to get. He said hopefully soon he will be making Jato pipes first.
@rcshowoff5427 awesome run! And please let THS know those revo pipes are hard to find and in high demand. I've been searching for months and just found a used one for my new o.s. 21tm. And of course just ordered his header! Thank God he had that in stock
Hahaha man I like to chase cars Down the street too, that Revo is awesome
Thanks man!!!
Hello boss.
Before nothing great video amd skills for drive 😅. I would like to know what adjust you have in the engine because my one never done those wheelies.
Did you fit any metal gear or is from factory, i ask you because I sold my one because every month I needed to fit the new pinion gear and I see that yours goes absolutely brilliant 👌. I loved that truck, but I finished tired to buy every month one pinion gear ( that one that is fitted to the engine). Thanks for your attention 👍.
Hello!! I started with the high speed needle 4.5 turns out then slowly lean it to get the most but always checking temps. I did do the forward only conversion but no metal gears in the transmission. The spur gear is the original stock gear no upgraded gears. I hope some of this info helped you. Thanks for watching.
Hello brother, can you tell me what you put in your Nitro to make Willys do? any piece exactly? how did you increase the power of the revo? thank you
Sorry for late reply. I installed a forward only conversion in the transmission, THS exhaust system and the long rockers on the suspension. Raising the suspension really helps with wheelies.
Awesome man. I just got a revo about 4 months ago but the front wheels seem absolutely wobbly as hell, when I'm ripping it and I'm in front of it as it's coming towards me I can see the front wheels wobbling all over the place. Does it have something to do with the bearings maybe?
Thank you!! Could possibly be the bearing if it is the wheels will wiggle by hand. If that's not it it could be the way the foams were installed in the tire at the factory. Hopefully you figure it out The Revo really is the best. Thank you for watching..
I own a revo and had the same issue on pavement !! What I did was lower the TSM when driving on the roads. On dirt or grass it’s ok but pavement always gave me wobbles also. Let me know if it helps.
Is flipping over now
Throws itself right over the wheelie bar. Ha!
The only difference in your revo and mine is the pipe you installed and i absolutely can not get mine to wheelie at all any suggestions?
Hello...I also had another revo and that wheelied also. Two things I found it to wheelie. Forward only conversion really brings out the power and the tall long suspension. I also use VP Master Basher fuel. Hopefully this helps.
What Exhaust was it can you drop a link I have one and would like to check it out plzzz
www thsracing.com
Gallimods hobby shop is the owner. Westchester NY. Gallimods.com
Thx buddy
How tight is your slipper clutch?
It's tight but not over tight. I always bench test too make sure there is some slip. I used to tighten it all the way and was breaking the main shaft in the transmission. Learned my lesson on that one.
@@rcshowoff5427 mine was really loose wouldn’t do a wheelie worth of piss!! Tightened it up little bit so much better
Stock clutch and bell?
Yes! All stock.
Great video. I really enjoyed that 👍🏼
Subscribe to your channel. 👍I'm looking forward to being together. 😊
Thanks again! Much appreciated.