2021+ Ford F-150/Raptor Dash Mount Standard Install Guide // BuiltRight Industries
Вставка
- Опубліковано 11 вер 2024
- This guide demonstrates the step-by-step installation of the BuiltRight Industries Dash mount STANDARD for the 2021+ Ford F-150 and Raptor. This mount does not use the lower support bracket. Expect this install to take 30-45min using the tools listed below.
Product Info: builtrightind....
PRO Installation Guide: • 2021+ Ford F-150/Rapto...
Tools Needed:
- 1/8in Allen Wrench
- 7mm Socket and Ratchet
- 3/8in Socket or Wrench
- 1/8in Drill Bit
- 1/4in Drill Bit
- Plastic trim tools (optional)
Nice if you mentioned what this dash mount is for! Video shows how to install a bracket that I don’t even know what it’s for. 🤔
Haha, thank you for the feedback - I'll add a bit to the description. The purpose of the mount is to provide a mounting surface for you to mount phone mounts, gps, radios, dash cams and so on without needing to use adhesive or suction cups, which are both prone to failure.
@@BuiltRightInd And also mount your balls first as once it's in you can't access the bottom with out uninstalling it.
Literally the first thing said in the video.
Will this mount fit the individual BT55 20mm ball mounts from 67designs?