How to replace audi A3 8L rear speakers
Вставка
- Опубліковано 11 лип 2024
- In this video I will show you how to replace the rear speakers in a 3 door Audi A3 8L with Pioneer TS-G1723I's.
This video may also be suitable for similar Mk4 Golf's and Seat Leon's.
There are a few tricks/hacks in this video too if you have issues with the trim holders falling off and how to make budget speaker mounts. - Авто та транспорт
Thanks for this upload, couldn't find anything for this model around... hope the sound difference between the stock and the pioneers is worth the effort
Thank you, very much for the 100% correct video, it's very well explained and easy to do!
Very helpful I know what I’m doing today
great job
dale buenisimo gracias por tu respuesta y rapides .voy a mirar los videos.
How did you remove the stuck clips where the long Black thing is by the Seats? :(
Sehr gut erklärt!!!
I have a Audi A4 1997, the rear speaker has a plug connection were the new speaker just has the basic red and black connection . Is the any information you could give me about that?
those pioneer speakers seem to be 17cm but the stock audi ones are supposedly 16.5cm, does that mean any 17cm speakers would fit? i myself am looking into some 17cm pioneer speakers as well the pioneer g1730f
Thank you so much for this tutorial!
Questions:
• Did you see by any chance if it's possible to fit a 6x9" speaker in these panels?
• And about the size/space limitations, did you ran into any trouble there?
• From what I researched, the front door speakers must be "small" to not block the window mechanisms, correct?
• In these back panels, the space is big enough?
Hrmmm good question, I think you could but some fab work might be needed.
I have another A3 atm that's being stripped and the door cars are out - I'll try work out the backspacing this weekend or tomorrow if I get a chance. Please chase me if I forget!
That would be amazing!
Thank you so much!
So, if one want to avoid major troubles and adaptations, it's better to stick within the original speaker sizes, i guess.
Well, one more thing for the shopping list, I guess... :D
If you went one step beyond the pioneer's I fitted - worth baring in mind at the time I was on a budget so got the best lower-mid range speakers and are driving them with a good amp it'll work nicely. I'm happy enough with the pioneers but they lack low end bass - when I do the sub build I'll HPF out the bass.
So, any luck checking the backspace for the rear-panel speakers? :)
I just took off the driver-side door speaker, there isn't anything left of the original surrounds of the speakers! :O
By surround, i mean that little rubber-like part that connects the cone to the frame, you know? Yeah, that part. It was gone. No wonder the sound was so bad.. :D
+Rhobson Vanzella damnit I ran out of time. I'm away atm and back in 2 weeks ... Though I might be making cool videos whilst away :D give me a poke after the 14th
Hi would you say the rear speakers are worth upgrading? I found the sound in the back is pretty good already with stock speakers, fronts were awful and I replaced them with a composite set but I don't know if it's worth to change the ones in the back. Thanks for the videos btw, really useful and well done.
I had issues with the stock stereo tbh and I did hack the rears a bit when I changed head units but I feel like these were better. I think there is only so far paper speakers can be pushed and my bass demands and music tastes mean I needed more.
For the £20 or so I paid it was worth it for me.
Trocou um kit 2 vias por um coaxial? Não entendí.
Tenk u men
Thanks for the video. I have an audi A3 8L. My rear speakers stopped working. I think my amp has died. I have bought an after market HU. Can I connect rear speakers with new wiring direct to the HU?
I know the sound won't be great. Will get a new amp and subwoofer later and speakers
Most HU have 4 outputs for speakers so you should be able to run new cables worst case and be fine as the stock amp is a pain to try and use.
Hi mate, the wires you ran from the amp to the speakers, did you have to splice on white and black wires that came in the box? Is did you just solder them straight to the speaker? Cheers.
Right having to jog my memory - on stock you've need to splice and shrink wrap - I actually fitted a separate amp and somewhere have a video covering all of that.
@@CarAndMechanical hi mate cheers for replying. Was also wondering if you fitted your own ignition live and spliced that yo the head unit? Or did you just plug it on to the power and front speaker plugs? Cheers again mate
My Audi A3 doesn't even have speakers in the back. I opened the side, and there were no speakers nor cables for installing new speakers. Can you make a video showing us how to make new cables to the rear speakers? Im sure it'll help many people :)
If you check one uploaded after this it shows how I ran the power and RCA cable to my amp - similarly run the speaker cable down the back of the HU, through the centre console, under the carpet and then stick each door card in.
Most speakers come with the terminals already sorted for you and hopefully eh wiring has enough length.
Speaker wires in rear are same color red with thin green stripe and green with thin red stripe which is positive and negative
do you have a link or a video how to change the front Speakers ?
ua-cam.com/video/cvfXsBjiyS4/v-deo.html
yo tengo el mismo y lo compre sin el subwoofer . no se como conectarlo . y no se donde va el amplificador o donde estan los cables . si me podrias orientar serias de gran ayuda.
Ir solo en el subwoofer. Tiré de la mía porque no funcionó muy bien con un estéreo del mercado de accesorios.
Terminé ajustando mi propio amplificador para alimentar los altavoces.
Si miras a través de algunos de mis otros videos creo que cubrí cómo he conectado todo. / Go stand alone on the subwoofer. I pulled mine because it didn't work very well with an aftermarket stereo.
I ended up fitting my own amp to power the speakers.
If you look through some of my other videos I think I cover how I wired everything.
hola me gustaria por favor que me contestaras que clase de pegamento es ese que usas porque yo tambien los quite pegue las grapas y se soltaron antes de volverlo a colocar agradeceria mucho una contestacion ya que llebo los paneles sueltos un saludo
Hola, he usado sellador de silicona./ Hello, I used silicone sealant.
CarAnd Mechanical en carrefour lo puedo comprar con la pistola ?
Creo que es un supermercado allí - sí o cualquier tienda en general. Esto era barato / cosas de repuesto que tenía en mi armario de piezas. Básicamente he utilizado silicona, ya que es bueno en el sellado y también para detener las dos superficies vibrando entre sí. / I think that's a Supermarket over there - yes or any general shop. This was cheap/spare stuff I had in my parts cupboard. I basically used silicone as it is good at sealing and also to stop the two surfaces vibrating against each other.
CarAnd Mechanical yo use silicona marca pattex de bote y ya te digo que no me sirvio de nada muchas gracias por contestar tienes muy buenos videos para los que tenemos estos coches un saludo y muchisimas gracias . sigo tu canal ;)
My audi A3 doesnt have trunk anymore. It has huge subwoofer in it :)
does all A3s have rear speakers? i have a 2002 one and i dont want to remove the panels just to check. is there any other way to find out?
Afraid I couldn't say without know the options but easy way to test is use the fader to the rear and/or see if you can hear sound coming from where the speakers should be.
CarAndMechanical I've tried that with a pioneer radio and it gave no sound to the rear but I've read that for aftermarket ones you may need some adapter for rear to work. But I guess I dont have rear ones
Are you running a stock or aftermarket head unit?
i have a aftermarket one
Sorry was late last night when I rear that - you need a harness adaptor and they vary depending on bose or not.
The Audi rear speaker sets up use a sub and amp that is separate from the head unit to power the amp and rear speakers, you can not just give it a remote signal as you also need to do some fancy grounding.
On your typical stereo harness you have 2 plugs, these one Audi are almost the same but only output the front speaker sound, it's the 3rd one that powers the rear and passes the signal (that's at a different volume level) to the rears.
I can't tell you which harness you need but they are £10-20 on ebay and it's really worth double and triple checking with the seller/forums to see which one you need.
I'm pretty sure it's the same connection you pulled out at 1.40 , could you help me
+WOG TOWN (ASSASSIN) how many pins/wires in your plug? On this install I actually ran a new amp due to Audi's silly remote amp system.
You could just cut and crimp on new connectors to match the new speakers.
+CarAnd “Car Mechanical” Mechanical there's a total of 8 wires I'm wondering what you have done with your wires?
+WOG TOWN (ASSASSIN) the multi pin that goes into the sub?
what size are the rear speakers?
6,5 "
My airbag symbol Turns on After This what Should i do
Try the following: unplug the minus cable of your battery, then check the yellow plugs on the seat belts both sides (front seat belts, plug is down at the pressure capsule) they both need to be connected. Then plug the minus cable to your battery...
If the airbag light is still on, you need a obd plug and software...
q modelo de audi a3 es ??
1999 Audi A3 8l 3 Door