I got mine to 43mph the bike Weighs 65pounds and with me 210 pounds....this is a stock engine during the break in period. Personally I know I can go faster.....But to afraid to go faster.... stock sprocket with 29inch rims. It takes off a little slow but builds up speed...I’m gonna leave it stock, way to dangerous on a very light bike.
I dont get why these kids keep changing the oil ratio in a 2 stroke that calls for 32 to 1. Your not improving the motor changing it out of spec like that. You just jet a 2 stroke correctly and set it up correctly oil ratio wont matter the start with. You all think its giving you more power lol.... Your just shorting your motors life. Anything that motor does on 32 to 1 it can 40 to 1
@@ManuelGutierrez-be1ci I have a 32 tooth sprocket on a 26 inch bike and I can hit 40 and it's just a BBR racing engine with high performance head and exhaust. It climbs hills very easily
Hi Alex I finally got my motorized bicycle ordered from bike berry.and will be here in a week. can't wait. I ordered the stage 4 that will be mounted on an F zero bike
You have to rebuild the bike with blue thread lock all over every bolt and nut, then install the engine kit with its bolts soaked in blue thread locker as well. Otherwise, everything will vibrate apart.
@@chancewindham1718 Maybe you would have understood the exaggeration if I said "Dunk the entire kit in a vat of threadlocker". ;) No more literal liquor for you, internet greenhorn.
Early 1960s London, U.K. Great North Road, combing in to Chiswick, Bicycle, Motor on rear wheel, Screaming along at 60 M.P.H. Sounded like a hornets nest on steroids. I'm sure it was one ride Charly sitting on that bike.
Hacking Cracking there are no "Simple ways." And really anything over 25mph is dangerous. Remember bikes weren't designed for highspeeds. So build at your own risk and be safe. They're not motorcycles
I haul a mower on an un-expanded'2-kid trailer'and put a 50 tooth.Ican ride up hills without pedaling now,and it accelerates on mild grades loaded.I'm not in it for speed.Without the trailer,accidentally hit 24.7mph.
For around $25-$60 on amazon depending on what you get (just mount or mount and sprocket combo) you can get a mount that comes apart and tighens onto the rear hub
is your bike a dyno duece like this one with the original hub with a single speed or does it have a nexus 4 speed ? i have a dyno motoglide and the is no way to mount a sprocket with the disc brake.
Stick to 32:1 ratio Mine didn't last very long at 40:1.. Did fine for a month.. Then slowly seized up And I'm sure not doing top speed runs either I average about 20mph puttn around town
U know how to stop that problem? Some good old fashion foam tape between the gas tank and frame, and suggest you make some of your own gas tank holders with some scrap metal
where did you get a longer throttle cable from? I bought the motor ready bike from bike berry and the bbr stage 4 racing motor. I bought 16" ape hangers and I need a longer throttle cable. Do you know where I could purchase one from?
GOOD running bike dude! I won't tell ya how bad it makes mine look,let's say mine you could pick apples off a tree riding by!stepping up to a zeda80next week would like to be in your power band ,at63 I don't have time to waste!
Hey brotha .. question .. was riding my bike to work today n all of a sudden my back tire locked up.. n I can't restart it .. when I pull the clutch in it moves but when I release it back tire locks up.. any ideas on what it could be
that nitrous set up is crappy nos is super cold its going to crack all that plastic i used a brass canister i machined myself with neoprine gaskets from nos the company nos ! you should hear a really loud whine once you open the nitrous you should have waited to hit top speed before hitting it so you have max fuel flow turning it on at low rpm will wear on motor . you should hit about 60 -70 mph on nitrous
I ride mine below 20mph,and still have Pedals,so it's considered 'Assited',but many States are different.If you don't ride without a helmet,and race like this..(No offense Intended,as you probably know when and where to test)....
Damn that thing is quick bro for being stock (besides the fact you were going downhill *cough cough* ) lol jp man check mine out!! I'm runnin a Flying monkey but currently doing some mods waiting for some more parts..
FYI, going downhill does not = an engine's top speed. This test is heavily flawed as it's repeatedly done on a downhill run. Guess what, you can do faster than that on a bike with no engine and not pedaling if you have a steep enough hill... or if you just throw that PoS off a bridge.
I'd like to try to find a way to get ahold of chaos Customs I live in Illinois but I'm up by the Wisconsin border of Illinois and I need to find somebody around here that I can work with if I need parts and help with the building
I would like to see some "buying guides" im very new to all this love it all lol but being new i dont know brands i dont know parts dont know many sites. I turn to youtube and found only 1 real buying guide to motor kits and it SUCKED there are a few that talk about 1 or 2 motors but i would like a good break down of a handfull from different sites price ranges done bye you your clear and to the point and seem to know what you talking about.. maybe even a aftermarket vid for a part 2 different sprockets pipes carbs chains belt drive etc. Thanks love the vids hope you do make a buying guide vid
Hey doggy. that was awesome i have the zeta firestorm engines and i highly recommend you 80cc junkies great engines built pretty tuff put it this way we have a club about20 guys they have amozon no brand kits and there fairly good don't get me wrong but you want power get a zeta i proved it and so did my boy we are the fastest in this lil town in oklahoma im sure we can be beat but a regular stock against a regular zeta engine i haven't seen one yet but ur vedieos are cool my man peace out 80cc boys.
Robert Ibarra I would like to join your club. I'm also in okc closer to the moore side of things. I thought I was the only one in this city riding a mb. Zeda mafia all the way!
zeda mafia? i don't think that's zeda . they just use the name. they have a youtube channel dedicated to dissing everyone in the market. @@PLATESWEEPER
How do you increase the fuel when shooting nos? Is it overly rich to begin with? Without extra fuel you will burn a piston. Keep a check on the porcelain of your spark plug, when specks of aluminium appear the piston is melting. Toss the nos, and get a18mm mikuni with about seven inches of intake, and tune it. Nice bike, and remember gadgets make people rich, not horsepower.
I have a cheap flying horse 4 stroke(49cc) on an aluminium frame walmart cruiser bike,had to do some mods but it does 40mph just like it is.The bike weighs about 70 lbs and I'm 190. My biggest problem is flat tires I have kevlar tires with puncture resistant liner added "green slime things" and now self sealing tubes.We'll see how this works out.Love the bike,lots of fun.
Do you have a link for them bars I like them ape hangers I’m building a beach cruiser motorized bike with a bobber style mixed in to it I think them bars would fit the look I’m going for
I would like to see you install a myriad of aftermarket high performance parts, including a tuned pipe, carburetor, air filter etc. Once you add the carburetor and exhaust pipe try filling up the tank with like 103 octane Sunoco 260 GT 'race' fuel. Really its just high octane gas that we cant get at the pump here in the us. Once you add the new carburetor and pipe I believe the compression ratio may increase? Either way it is probably already 10:1 or higher so it would benefit from race gas no matter what folks wanna tell you. If you aren't already using high performance synthetic 2 stroke racing oil then I suggest you try Red Line 2T synthetic racing 2 stroke oil as it has the best performance out there and best reviews. once i switched to it i noticed a 15% or so improved mid range and slight top speed increase on my goped sport scooter. Also idk if this is a geared bike but if you plan on getting more top speed out of it, may want to try a geared Trek or a bike frame designed for engine kit to be attached and jack shaft kit to usher in a much more usable power spread through whatever amount of gears the chosen bike has.
Funny i use amsoil in my giant scale airplanes and i tried red line right after my da85 had total rebuild and the amsoil was noticeabley way better i can spin a prop that is an inch bigger than the way it ran on red line
Cool..careful with wheel(s) hub lubricant burning up as well as the engine going high speeds, but for the short duration, it's awesome. We need 1/8 mile drag race competitions for "funny bike" drag racing.
@@MotoredLife my motor keeps backfiring when i full throttle and also when i full throotle it will just not go any fastet and bog do you know whats wrong ty
I am having problems with mine since i bought it it has nice low rev but when at full throttle it boggs out and the faster you go down hill the worse the bogg gets its not an high rpm rev like yours its a low idle trying to go fast i dont know nothing about these bicycle motors this my first one
It's doable but it's tough to get it done without a tensioner. On one of my bikes I put about 300 miles on it when it was new woth no tensioner. Ran great and then all the sudden one day I guess the change stretched a little bit. Could never get it to run right without popping the chain after that.
I can’t wait to get mine and I’m so glad you know how to ride everyone I watched let go of the throttle bc they think it’s gonna blow up when it’s not it’s a 2 stroke its gonna sound like that
@@exsposeaccount1210 stock engines hit 35-40 out of the box. Honestly i bought a $100 ebay engine the other day to try out this new hydraulic clutch. The clutch ehh, the engine hit 35 and does wheelies out of the box! If you break them in right they will last forever
Did that frame come with that fork? And while we’re at it the handlebars? I’m looking for a fork with some suspension for my huffy beach cruiser but can’t seem to find any for a decent price. That bike is nice and clean looking that’s what I’m shooting for!
I had no problem getting 32-35mph... But the chain is making a crazy amount forces! To go faster than 40 it has to converted to a belt drive or something. That amount of chain is just too much force for a bike chassis and wheel... In my opinion
I have a metal gear replacement for the Tensioner,but am going to add back the plastic 'thing'on a spring to keep out chain 'wobble'.I hate it when the chain stretches,and you can see the flex.I've just done 4th tighten on new chain and see 1/2" flex and can feel it riding.
Thats awesome. Ive been watching your vids and subscribed. Whats your thoughts on single speed vs 5 spd with sic bikes jackshaft running those gears? I have a 1988 Schwinn Cruiser 5 or 1954 Monark Super Deluxe single spd. I wanting to put together one or the other but wanted your input. I have a collection of old bike and now this makes these bikes worth collecting. I might do both bikes but whats your take on which you would do first?
Jack shafts are honestly too much work and upkeep and they ILLEGAL anywhere in the US. you need registration if it has multiple speeds. I have a new SBP HD kit in a box now wont use it.
I got mine to 43mph the bike Weighs 65pounds and with me 210 pounds....this is a stock engine during the break in period.
Personally I know I can go faster.....But to afraid to go faster.... stock sprocket with 29inch rims.
It takes off a little slow but builds up speed...I’m gonna leave it stock, way to dangerous on a very light bike.
Bro u need too get a upgraded nitrus can made out of cnc there like 20 bucks rn till the price goes up not no plastic.
This was the most entertaining video of the Month of March...thank you!
Thanks for watching
I would love to know just how fast you went and how long you held that speed
I just sold my old motor and bought a new one from amazon 80cc
I dont get why these kids keep changing the oil ratio in a 2 stroke that calls for 32 to 1. Your not improving the motor changing it out of spec like that. You just jet a 2 stroke correctly and set it up correctly oil ratio wont matter the start with. You all think its giving you more power lol.... Your just shorting your motors life. Anything that motor does on 32 to 1 it can 40 to 1
My motorized bike's max speed was 64 km/h (40 miles/h), with 28" wheels and a 32 T rear sprocket. Everything was stock.
+Jordán József nice I love the larger tires.
I’m going to put a 32 tooth rear sprocket on my 26 inch beach cruiser hoping to get 40 or 45 mph.
@@ManuelGutierrez-be1ci I have a 32 tooth sprocket on a 26 inch bike and I can hit 40 and it's just a BBR racing engine with high performance head and exhaust. It climbs hills very easily
Bike is clearly in very good condition, front tire didn't even hint at wobble on those rough roads at 40mph, nice
Hi Alex I finally got my motorized bicycle ordered from bike berry.and will be here in a week. can't wait. I ordered the stage 4 that will be mounted on an F zero bike
I like how you build the motorized bikes mine just fall apart
xd
You have to rebuild the bike with blue thread lock all over every bolt and nut, then install the engine kit with its bolts soaked in blue thread locker as well. Otherwise, everything will vibrate apart.
He has a schwinn. I have a 4 stroke on my 1980 schwinn typhoon. Works awesome.
@@jorelldye4346 letting them soak? That's ridiculous and unnecessary
@@chancewindham1718 Maybe you would have understood the exaggeration if I said "Dunk the entire kit in a vat of threadlocker". ;)
No more literal liquor for you, internet greenhorn.
Early 1960s London, U.K. Great North Road, combing in to Chiswick,
Bicycle, Motor on rear wheel, Screaming along at 60 M.P.H.
Sounded like a hornets nest on steroids. I'm sure it was one ride Charly sitting on that bike.
40MPH on a 44 Tooth?!?!?!?! thats crazy RPMS there man! sweet!
killerrush77 i got 36mph stock. But yeah, very high rpm! Lol. Wouldn't ride that fast for long periods. Was just testing it
WHAT TOOTH I SHOULD GET 36 44 48?
Hacking Cracking there are no "Simple ways." And really anything over 25mph is dangerous. Remember bikes weren't designed for highspeeds. So build at your own risk and be safe. They're not motorcycles
I haul a mower on an un-expanded'2-kid trailer'and put a 50 tooth.Ican ride up hills without pedaling now,and it accelerates on mild grades loaded.I'm not in it for speed.Without the trailer,accidentally hit 24.7mph.
I use Synthetic blend Oil at 25:1 with 93 octane fuel.I want my motor to last,so I won't go less oil.I don't smoke with this.Now have about 600miles.
Thanks for taking the time to do that breakdown. Informative. I'd favor the 32:1 ratio; Would you agree?
for a stock setup yes id go 32:1 any race parts 40:1 for sure
Give me like that motor please for my lowride please
Alex the NOS ending was funny
How fast do you think you were going?
+Nelson Feliciano about 40. Just got there fast as shit. Hit top speed b4 the light
How do you have the sproket mounted?? I'm trying to find the best way.
For around $25-$60 on amazon depending on what you get (just mount or mount and sprocket combo) you can get a mount that comes apart and tighens onto the rear hub
is your bike a dyno duece like this one with the original hub with a single speed or does it have a nexus 4 speed ? i have a dyno motoglide and the is no way to mount a sprocket with the disc brake.
Always like the looks of your bikes. Love the handlebars on this one.
There's nothing finer 2-cycle running right it's obvious you put your working buddy no doubt sweet bike have a good night take care
Stick to 32:1 ratio
Mine didn't last very long at 40:1.. Did fine for a month.. Then slowly seized up
And I'm sure not doing top speed runs either
I average about 20mph puttn around town
How tf is it 40 mph stock 😩
that goes pretty good
how you yo jeep the chain from.falling off at that rated of speed
If it's adjusted properly, it shouldn't fall off. It also helps to have a motor-mounter spring chain tensioner
Common sense always helps :)
that's all I would need around town. so I pick a good bike and order a kit and I wonder what kind of wear it put on tires.
U know how to stop that problem? Some good old fashion foam tape between the gas tank and frame, and suggest you make some of your own gas tank holders with some scrap metal
where did you get a longer throttle cable from? I bought the motor ready bike from bike berry and the bbr stage 4 racing motor. I bought 16" ape hangers and I need a longer throttle cable. Do you know where I could purchase one from?
Thanks for these vids I want to buy one of these it's great that you start all the tests the same way nice
GOOD running bike dude! I won't tell ya how bad it makes mine look,let's say mine you could pick apples off a tree riding by!stepping up to a zeda80next week would like to be in your power band ,at63 I don't have time to waste!
When you just use a big bottle of nitrous the ones they use for the motorcycle
Hey brotha .. question .. was riding my bike to work today n all of a sudden my back tire locked up.. n I can't restart it .. when I pull the clutch in it moves but when I release it back tire locks up.. any ideas on what it could be
that nitrous set up is crappy nos is super cold its going to crack all that plastic i used a brass canister i machined myself with neoprine gaskets from nos the company nos ! you should hear a really loud whine once you open the nitrous you should have waited to hit top speed before hitting it so you have max fuel flow turning it on at low rpm will wear on motor . you should hit about 60 -70 mph on nitrous
Do you get pulled over on your bikes
These motorized bike cant get pulled over it a bike bc it has a padel on it so u can use a motor or use ur feet if has no padel u can get into trouble
I ride mine below 20mph,and still have Pedals,so it's considered 'Assited',but many States are different.If you don't ride without a helmet,and race like this..(No offense Intended,as you probably know when and where to test)....
Damn that thing is quick bro for being stock (besides the fact you were going downhill *cough cough* ) lol jp man check mine out!! I'm runnin a Flying monkey but currently doing some mods waiting for some more parts..
Haha
So if you measure distance where you ran nitrous and take your time from the video...voila. Speed !!!
I'm only like 210lbs with bike an all I'm gonna do some speed test on mine, u were hauling ass
Because I was thinking about putting one in my beach cruiser see that little motor road just take off like a bat out of hell
Is that my sub-woofer... or does that thing really sound that good?
Alex What kind of front end is on it and do you have a link?
Put a chain saw plug itta go 60 plus.mine runs over 60 without hitting the nitrous
Hey bud six sigma sells a all metal nitrous control that is anodized aluniniumand does not leak
its been 6 years and im wondering is youre bike engine still alive or not
spent more on add ons than a chainsaw build
You in Indiana building behind looks familiar at 0:41
Your gas tank moves dude lol grrr 😠
I ordered a nitrous kit for my phantom 85 V3 but you can't buy extra cartridges you have to buy another kit which sucks
You can go to a head shop and buy whip it refills. It is nitrous
Great channel, love that you used nitrous 😂😂 subscribed liked and rang the bell look forward to changes you make :)
FYI, going downhill does not = an engine's top speed.
This test is heavily flawed as it's repeatedly done on a downhill run. Guess what, you can do faster than that on a bike with no engine and not pedaling if you have a steep enough hill... or if you just throw that PoS off a bridge.
Thanks for watching! 👍
I'd like to try to find a way to get ahold of chaos Customs I live in Illinois but I'm up by the Wisconsin border of Illinois and I need to find somebody around here that I can work with if I need parts and help with the building
Kaos Kustoms Garage just google them or they're on Facebook.
Nice,mine fly's like that too,when she's healthy
Nitro funny bicycle. It was cooking did you notice any nitro engine damage and how long were you pushing the nitro.
Not really that engine went on several bikes after this video
Mine runs over 60 with chainsaw plug
Oh my God that bike is dope I love it
We're u going down hill?
I would like to see some "buying guides" im very new to all this love it all lol but being new i dont know brands i dont know parts dont know many sites. I turn to youtube and found only 1 real buying guide to motor kits and it SUCKED there are a few that talk about 1 or 2 motors but i would like a good break down of a handfull from different sites price ranges done bye you your clear and to the point and seem to know what you talking about.. maybe even a aftermarket vid for a part 2 different sprockets pipes carbs chains belt drive etc. Thanks love the vids hope you do make a buying guide vid
How do you keep your engine running when you stop?
What kit you got to make those Forks work with that bike
Hey doggy. that was awesome i have the zeta firestorm engines and i highly recommend you 80cc junkies great engines built pretty tuff put it this way we have a club about20 guys they have amozon no brand kits and there fairly good don't get me wrong but you want power get a zeta i proved it and so did my boy we are the fastest in this lil town in oklahoma im sure we can be beat but a regular stock against a regular zeta engine i haven't seen one yet but ur vedieos are cool my man peace out 80cc boys.
Robert Ibarra I would like to join your club. I'm also in okc closer to the moore side of things. I thought I was the only one in this city riding a mb. Zeda mafia all the way!
zeda mafia? i don't think that's zeda . they just use the name. they have a youtube channel dedicated to dissing everyone in the market. @@PLATESWEEPER
How do you increase the fuel when shooting nos? Is it overly rich to begin with? Without extra fuel you will burn a piston.
Keep a check on the porcelain of your spark plug, when specks of aluminium appear the piston is melting.
Toss the nos, and get a18mm mikuni with about seven inches of intake, and tune it.
Nice bike, and remember gadgets make people rich, not horsepower.
I have a cheap flying horse 4 stroke(49cc) on an aluminium frame walmart cruiser bike,had to do some mods but it does 40mph just like it is.The bike weighs about 70 lbs and I'm 190. My biggest problem is flat tires I have kevlar tires with puncture resistant liner added "green slime things" and now self sealing tubes.We'll see how this works out.Love the bike,lots of fun.
That is plenty fast enough for me
What size wheels those are 26" 28"??
Why don’t mine rev like that!
Do you have a 4 stroke or a 2 stroke?
Do you have a link for them bars I like them ape hangers I’m building a beach cruiser motorized bike with a bobber style mixed in to it I think them bars would fit the look I’m going for
ok instead of building a new racing quadcopter im building one of these mofos so i can get to my damn drone races without having to get rides lol
Can’t wait til my new engine arrives. Lol I’m itching! Watching these doesn’t help lol nice bike 👍
Are you during break in???
Do you 'dump' the clutch? As in peddle before engagement or do you stop then dump the clutch as you proceeding into the intersection?
Chain tensioner?
I have honda tmx but i more like motorized bicycle because you can exercise if you want.
What are your brakes
Good work Alex. Didnt get to see everything you did with the nitro setup though. Informative vid
yes i saw that sorry its not a good set up
That's a badass bike
listen to the sound of that 2 stroke hell yeah. reminds me of the bikes ive built. badass bro
I would like to see you install a myriad of aftermarket high performance parts, including a tuned pipe, carburetor, air filter etc.
Once you add the carburetor and exhaust pipe try filling up the tank with like 103 octane Sunoco 260 GT 'race' fuel. Really its just high octane gas that we cant get at the pump here in the us. Once you add the new carburetor and pipe I believe the compression ratio may increase? Either way it is probably already 10:1 or higher so it would benefit from race gas no matter what folks wanna tell you. If you aren't already using high performance synthetic 2 stroke racing oil then I suggest you try Red Line 2T synthetic racing 2 stroke oil as it has the best performance out there and best reviews. once i switched to it i noticed a 15% or so improved mid range and slight top speed increase on my goped sport scooter.
Also idk if this is a geared bike but if you plan on getting more top speed out of it, may want to try a geared Trek or a bike frame designed for engine kit to be attached and jack shaft kit to usher in a much more usable power spread through whatever amount of gears the chosen bike has.
Funny i use amsoil in my giant scale airplanes and i tried red line right after my da85 had total rebuild and the amsoil was noticeabley way better i can spin a prop that is an inch bigger than the way it ran on red line
To increase compression . Decrease combustion chamber volume .
How you do this?
Dude put some double stick tape under the tank.
+kjsmolik yeah for sure
I use foam roll bar padding around the frame and tighten the tank down onto it, acts as a shock absorber and stops the breaking of tank mounts.
good idea, thank you!
Or a section of mountain bike tire?
1:40 ratio... :( 1:20 full sintetic repsol. Shell adwance ultra. Eni iride racing ✌💪
where do you buy this engine whats is called i for some reason can't find the exact one
My bike top speed is 30mph. Stock everything, 44tooth, I wonder if octane booster helps more speed,
Nope. Lol
What kind of handle bar are those and are those shock absorbers added on to the beach cruiser?
Nitro
Cool..careful with wheel(s) hub lubricant burning up as well as the engine going high speeds, but for the short duration, it's awesome. We need 1/8 mile drag race competitions for "funny bike" drag racing.
I agree brother! A good drag race would be awesome. Get all the big youtube channel guys to meet at the track and see who really is the top dawg!
Is that stock GEARING
Yes
@@MotoredLife i got a question
@@MotoredLife my motor keeps backfiring when i full throttle and also when i full throotle it will just not go any fastet and bog do you know whats wrong ty
@@Daddychill945 Your carb is making it four stroke. Tune your carb
Very disappointed. Lame ending.
Happy you watched though. Point is that nitrous kit is crap
I am having problems with mine since i bought it it has nice low rev but when at full throttle it boggs out and the faster you go down hill the worse the bogg gets its not an high rpm rev like yours its a low idle trying to go fast i dont know nothing about these bicycle motors this my first one
Please help me
Tune your carb. Move the needle clip up
@@MotoredLife i dont use stock carburetor anymore i use the performance carburetor
You must used a hella long nitro line. The feed on that must been wild when it emptied .. one helluva kick ..love it
Damn I can't even get mines over 26mph ..
What oil ratio you running?
@@MotoredLife ... I was told 24-1
@@RSRivera613 thats waay too thick! Go 32:1
Remove the exhaust baffle cap if you havnt alrdy let it blow all that oil out!
@@MotoredLife .. yeah I removed tht cap of the exhaust.. n ok with the oil ratio ... Thanks bro
How did the Zoom triple tree suspension forks handle?
that looks like fun!!
i dont get when is nitro used????
How much do you have to budget for tires
Rear tire lasts about 4-6 months.
Love the ape hanger handle bars. I need a set of those
Next step:
Dual nos
And
Expansion chamber
I put the bt100 on it! 1 gal tank. Taking it to Steve to get a pipe.
Alex, is that bt100 build done yet bud? I can't see a video at all.
That's dope
Did your clutch cable and throttle cable both reach okay by adding the ape hanger handlebars?
Hey bro do you sell bikes like that already put together
Hi bro!! Nice bike!!! have a question..its not necesary to put an chain pully tensioner on the frame?.
It's doable but it's tough to get it done without a tensioner. On one of my bikes I put about 300 miles on it when it was new woth no tensioner. Ran great and then all the sudden one day I guess the change stretched a little bit. Could never get it to run right without popping the chain after that.
I can’t wait to get mine and I’m so glad you know how to ride everyone I watched let go of the throttle bc they think it’s gonna blow up when it’s not it’s a 2 stroke its gonna sound like that
Yeah wide open for days. These lil engines arnt fragile if you take care of them!
@@MotoredLife how fast would stock get me
@@exsposeaccount1210 stock engines hit 35-40 out of the box. Honestly i bought a $100 ebay engine the other day to try out this new hydraulic clutch. The clutch ehh, the engine hit 35 and does wheelies out of the box! If you break them in right they will last forever
@@MotoredLife thank you bro at least you know the real mph and yea my buddy has one and he had his for like 6 months now and it still runs amazing
You know I'm pretty sure 3.2oz to 1 gal is 50 to 1 so if u were using 4 oz to 1 gal in beginning for 32 to 1 u were heavier then u thought
+raamastak1 Mixing Ratio (Gas:Oil)Volume of GasolineVolume of 2-Cycle Oil 40:1 1 US gal. (128 oz)3.2 oz. 50:1 1 US gal. (128 oz)2.6 oz.
What bicycle was that? It is perfect for this.
It was my favorite bike. Dyno Deuce this one actually was stolen the other day!! Such a shame
@@MotoredLife oh that is a bummer. They must have based the design on very old style bicycles
Did that frame come with that fork? And while we’re at it the handlebars? I’m looking for a fork with some suspension for my huffy beach cruiser but can’t seem to find any for a decent price. That bike is nice and clean looking that’s what I’m shooting for!
+Kyle Idstein the stock forks did not have the shocks. Those are zoom v1 forks, handle bars are stock. The bike is a DYNO Deuce
I had no problem getting 32-35mph... But the chain is making a crazy amount forces! To go faster than 40 it has to converted to a belt drive or something. That amount of chain is just too much force for a bike chassis and wheel... In my opinion
freelancerider100 415H chain
I have a metal gear replacement for the Tensioner,but am going to add back the plastic 'thing'on a spring to keep out chain 'wobble'.I hate it when the chain stretches,and you can see the flex.I've just done 4th tighten on new chain and see 1/2" flex and can feel it riding.
Thats awesome. Ive been watching your vids and subscribed. Whats your thoughts on single speed vs 5 spd with sic bikes jackshaft running those gears? I have a 1988 Schwinn Cruiser 5 or 1954 Monark Super Deluxe single spd. I wanting to put together one or the other but wanted your input.
I have a collection of old bike and now this makes these bikes worth collecting. I might do both bikes but whats your take on which you would do first?
Jack shafts are honestly too much work and upkeep and they ILLEGAL anywhere in the US. you need registration if it has multiple speeds.
I have a new SBP HD kit in a box now wont use it.
@@MotoredLife thanks for your response, appreciated. Idk thanks