LiftMaster LA500 residential gate opener N Dallas, TX | SC0065
Вставка
- Опубліковано 27 гру 2017
- Call 214-931-2626 for the EXPERTS in access control, audio/video, automatic gate, video surveillance and low-voltage project management.
-
This is a very general overview of the steps to installing the lift master LA500 residential/light commercial linear actuator gate operator.
This is a complete video of all steps.
-
Please call the commercial and residential EXPERTS in the Dallas-Fort Worth area before you make any decisions about your access control. Call/text 214-931-2626 or email customerservice@safeguardcontrols.com.
Thank you for watching
Brooks "The Access Control Expert"
-
Website: www.safeguardcontrols.com
Linked in: goo.gl/XcfP34
Instagram: goo.gl/Cag9Ke
Google +: goo.gl/1zcX4E
Forum: accesscontrolforum.com
© Safeguard Controls, LLC
Safeguard Controls, LLC
3100 Commerce 126
Dallas, TX 75226
customerservice@safeguardcontrols.com
214-931-2626
We can use these videos as a general unscripted and unfiltered video blog. Safeguard Controls, LLC personnel are professionals and/or under the supervision of trained professionals. All service should be performed by professionals trained in the respective equipment. Not all those filmed or depicted are employees. You should not take the information given as professional, safety, legal, medical, etc. advice, direction, etc. You are responsible for making informed decisions based on all the information, information that exceeds the scope of these videos. During normal operation electronic, electrical, electro-mechanical, etc. equipment and devices under test can cause severe injury or death. Electronic, electrical, electro-mechanical, etc. equipment and devices under test can act different than normal operation that can cause severe injury or death. These systems vary. Use this information with caution, at your own risk and there are no warranties implied or expressed based on any information given. Our policies and procedures will change without notice. Pricing will vary. Products mentioned are not necessary endorsements. See associate for details. - Наука та технологія
GOOD NEWS, This gate operator has been in service over year with the ZERO POINT ZERO return calls for warranty, service, etc.
Also, we are planning to upgrade our field camera with better stabilization as well as just upgrading our in NLE video editing software which has improved video stabilization as well. Still not going to win any director awards but every little bit helps.
Have you ever thought to yourself why more companies don't match the manufacturer's warranty when it comes to their labor? Or why some companies only offer limited labor warranties such as 90 days, 120 days or just one year.
You just found the only company with part and labor warranties that start at 1126 days.
The process of making two pieces of steel so hot, over 1500°, it liquefies and becomes one is called welding. This process sounds like it should make that joint pretty strong, right? So why do so many companies have limited guarantees on their welding craftsmanship?
We have no idea either because you now have a company that’s one button away at, 214-931-2626, that offers a LIFETIME WELD WARRANTY.
Have you ever had a service technician at your home or business that you were quite sure about? A gut feeling something was not quite right?
Wouldn’t it be nice to have a government listed public database verifying sufficient criminal background check, records of fingerprints and photographs, any negative history against the technician or company, etc. You can take comfort knowing we are one of the few access control companies that is licensed by The State of Texas Private Security Program, B07351401, as an electronic access control company and a continuing education training school.
So now that you discovered a state licensed, exceptionally qualified, insured, local expert, there’s just one question? When you need electronic access control service who are you going to call? Call 214-931-2626 so together we can design a safe and beautiful custom automatic gate! Save our number in your phone right now 214-931-2626.
No, I never wondered why companies didn't match parts warranty with labor warranty. It's simple actually. Let's say LiftMaster has a major defect in one of their runs. Let's say that causes you 15 warranty calls. That's a bunch of labor you just ate for something that wasn't your fault. That's enough to put some guys in the red for a month or two.
@Derek Huber, you're looking at it from the installers perspective. We base our warranty on what our customers want not what our competitors want.
We know you're exaggerating when you suggest an access control product would have 15 warranty calls. However, how is that customers fault? Why should they held accountable for accepting your recommendations? The answer is they shouldn't.
See the right thing to do is partner with manufacturers that have plans to compensate for this type of issue. We partner with manufacturers that have a proven track record of creating products that have a lower total cost of ownership.
From your standpoint you think it's ludicrous to have a labor warranty that's over 1100 days like we do.
From our standpoint we think it's ludicrous to have a 1 year warranty. Which would you pick as a consumer?
If your someone like Derek and want the shortest warranty in the industry. DO NOT CALL US!
If you want the longest labor warranty and the longest parts warranty all with the possibility to extend them, CALL US! 214-931-2626
Let us know that "YOUR NO DEREK!".
Thanks for the input Derek and if you would like to be interviewed for one of our podcasts to continue the discussion please let us know!
You can reach out to me directly at michael@accesscontrolforum.com. Talk to you soon
Don't let haters get you down. Appreciate the video. Looks great!
are you kidding me. This is one of our most popular videos if not the most popular. We routinely get recommendations from UA-cam because of this video.
Yes it does suck that our camerawork is not so great and we have changed that.
However this was meant to be alive video blog and never instructional..
We appreciate the kind words and remember that just because it's a thumbs down does not mean it ranks lower on UA-cam.
Thumbs up and thumbs down shows activity. So let the haters keep hating. Bring them on
@Clint Britt Where are you based out of?
I was checking out some of your videos, thanks for the info!
If you would like to do an interview for our podcast or UA-cam channels please let me know. You have a lot of information that a lot of the entrepreneurs in our business could benefit from.
Thanks again for your support!
Thanks for video! Replying from Dallas, Tx also!!!
Thank you for watching, you rock!
Great installation
Thanks do you install electronic access control / gate operators?
Do you have any tips or recommendations on the install?
i have one la412pk solar with 2 battery i can change for direct energy?
Our liftmaster LA500 is making 3 beeps. We’re guessing a battery needs to be replaced but we couldn’t spot where it is. Is this an easy fix?
Wouldnt recommend the end user do it without expert training. With low batteries or damage/malfunction three beeps can be anything. It could be an obstruction.
Three beeps on a LiftMaster LA500 gate opener typically indicate a gate travel limit issue. This can be caused by the gate hitting an obstacle or by the limit switches being out of adjustment. To resolve this issue, you can check for obstacles blocking the gate's travel and adjust the limit switches according to the manufacturer's instructions.
Isnt the LA500 overkill for that small gate? Why couldn't the LA400 be used?
Such a great point! We regularly install gate openers that can exceed the specifications of the gate. This way as the hinges, actuator arm (motor), environment, etc. changes we have plenty of "power" to operate the gate. This makes for a long gate life!!!
Also we prefer the LA500! #LiftMaster #LA500 #LA400 #LA412 #CSW24 #HDSW24 #WirelessKeypad #LiftMasterOperator #LiftMasterOpener
Anyone can help with instructions about how to wire or where in the panel to connect an exit wand to an LA500 gate opener please.
I appreciate any help
Exit input. Have a qualified, licensed and insured company do this for you.
Did you get a qualified technician to figure this out? Although I don't think they help end users with this type of problem here is information from Liftmaster's website
"Refer to product manual for warranty terms. All return and warranty replacement requests should be placed by calling our Technical Support Center at 1-800-528-5880."
Our fire department requires a Red emergency activation strobe light, I am using a csl24ul slide gate
these are the requirements,
1.
All motorized gates must also be equipped with one flasher unit and one external lamp
assembly with a red globe and guard to be mounted.
2.
The light shall be visible from both sides of the gate, be mounted at the top of the fence
within two (2) feet of the gate opening and flash upon the gate being activated by the MFD
Opticom™ compatible receiver platform system or Knox® Key Switch 3502 (mechanical key
type).
3.
The strobe shall continue to flash as long as the gate is being held open by the emergency
access system.
Will you let me know how to connect the strobe light to the control board,
Best regards,
John Chacko
That sounds like mixed requirements but the manual will have details to connect the control board to emergency ingress equipment.
Clean work👏🏾How much does a job like this cost?
The cost to install a LiftMaster LA500 gate opener can vary depending on a number of factors, such as the type of gate, the complexity of the installation, and the location of the property. On average, the cost of a professional installation can range. It is best to contact a local gate opener professional to provide you with a more accurate estimate for your specific installation.
i can work for you holding the camera
HAHA. You are right. We were working fast and moving fast. We have another 1500 videos like this waiting to get out. We are working on a steady cam now. However,
I want to take you up on your offer! We start tomorrow in Keller, TX at 5:30am. Can you bring the Whataburger?
Thanks for subscribing
Sorry about that newer videos are better. Check out facebook.com/safeguardcontrolsllc/ and facebook.com/SafeguardControlsVideoBlog and we have new channels on youtube as well
17:24 Gate Closes
Still closing!
Black would have been a better color for the paint job.
Probably an informative video but I got vertigo watching the first couple of minutes and had to turn it off. The guy knows more about gate openers than he does working a camera, for sure.
That's the big complaint!
Note to self:
Take some healthy doses of Dramamine prior to viewing.
Sorry about that newer videos are better. Check out facebook.com/safeguardcontrolsllc/ and facebook.com/SafeguardControlsVideoBlog and we have new channels on youtube as well
Dood, next time set yr phone camera on a tripod. 😉
Sorry about that newer videos are better. Check out facebook.com/safeguardcontrolsllc/ and facebook.com/SafeguardControlsVideoBlog and we have new channels on youtube as well
Practice your welding, no excuse for welds that look like that. Powder coat contaminating your weld... zero excuse. Preparation of the metal is 90% of the weld. You had a flap disk, should have used it BEFORE the weld.
Hope the brown paint was customer speced. I'd be beyond pissed if an installer painted the boxes and conduit. I'm sure the powder coasters loved having to deal with that as well.
With our 1126 PARTS AND LABOR WARRANTY our customer has been extremely happy. There have been ZERO POINT ZERO return calls. As usual.
We have a LIFETIME WARRANTY ON OUR WELDS and no one has ever had to use it. Could you upload and link below your field welds to existing finished materials, link below.
Paint, etc. does contaminate the welds and we recommend anyone installing a gate, prior to the gate operator or anything that will be welded in the field, keep that in mind. This customer had the gate installed by others before we installed the gate opener. However, as you know this does not jeopardize the strength or function of the weld in this application.
The customer was VERY HAPPY with the conduit work and paint. They felt it blended perfectly with the fence. We don't see to many "powder coasters" in these parts. That's more one the gulf "coast". Thanks for your comments. Thumbs up here. Nice work: ua-cam.com/video/n-R1Smh14MI/v-deo.html
As mentioned in the video the paint was to prevent rust and the powder coaters or "coasters" as you call them, are coming to repaint the gate...
Still man don't do that to people's gates. I hate going back and seeing gabage welds holding everything together
@@jacobjohnson9030 Where can we see pictures of your work?
@@SafeguardControlsLLC photos.app.goo.gl/cPJYmmV9gpbBt2Qp7
You move the camera too much. Can’t see what you really saying
Sorry about that newer videos are better. Check out facebook.com/safeguardcontrolsllc/ and facebook.com/SafeguardControlsVideoBlog and we have new channels on youtube as well
work on your camper operation...maybe have somebody had the camera instead of having us look at the ground.....nothing personal
Your absolutely right! We have a gopro 3 that we have been incorporating that is on a stand. That will supplement the hand held shots. We just got a session 5 that will help too. We have been using a cell phone for most of the work though mainly out of convenience.
You just gave me the idea of getting a steady cam mount for the cell phone! Thanks for the feedback! We really need it!
We haven't seen any videos from @Pacific Ponds and Design. How's things going out there on your end
Too fast with camera
Sorry about that newer videos are better. Check out facebook.com/safeguardcontrolsllc/ and facebook.com/SafeguardControlsVideoBlog and we have new channels on youtube as well
Too easy with the camera
Sorry about that newer videos are better. Check out facebook.com/safeguardcontrolsllc/ and facebook.com/SafeguardControlsVideoBlog and we have new channels on youtube as well
Too fas
Sorry about that newer videos are better. Check out facebook.com/safeguardcontrolsllc/ and facebook.com/SafeguardControlsVideoBlog and we have new channels on youtube as well
disorganized video and poor presentation and yeah, awful camera work. Why bother?
Thanks for the input. You do some awesome work. Everyone should check out your website: www.peltzer.net. Very high end, quality work! Thanks again.
We do these videos to attract new customers not teach technicians how to install gate openers. It would not meet our ethical standards to use UA-cam to teach end users about how to install these products. Qualified and trained professionals will use schools, like the one our president owns, manufacturers, and trade organizations to learn how to install these products.
People who are looking for entertainment and general ideas come to UA-cam to watch these videos. So although your points are valid your comment of "Why bother?" Seems uninformed as to what these videos are. As stated in the description
"We can use these videos as a general unscripted and unfiltered video blog. Safeguard Controls, LLC personnel are professionals and/or under the supervision of trained professionals. All service should be performed by professionals trained in the respective equipment. "
It is disorganized and that's the beauty of live video! It is not scripted it is not filtered and at some honest look at what we do day in and day out.
Although not for everybody, clearly not for you, people find value in these videos.
Also, people find value in other people's opinion.
We would love to interview you about your thoughts on this video any time. It would definitely be helpful to have a second point of view from another expert. The purpose of those interviews are again entertainment, not training, and to promote our services. Just like we had before we would love to continue to promote your business and awesome craftsmanship at www.peltzer.net. Keep the input coming as our potential customers and existing customers find value in other people's opinion.
Reach out to us directly if you would like for us to help promote your video, company, etc. on one of our other national platforms.
We hope to hear from you Eric thanks for your input. Let's keep the dialogue going
If you have not visited www.peltzer.net do so today.
Sorry about that newer videos are better. Check out facebook.com/safeguardcontrolsllc/ and facebook.com/SafeguardControlsVideoBlog and we have new channels on youtube as well