What a wonderful factory! I love that giant circular foam slitter. I have a humble recommendation. At 4:53 you are assembling a mattress. I notice that you fold each layer in half, glue, then unfold the layer and lay it down. What you are doing may seem faster and more productive but there is a better way that improves time, quality and craftsmanship. When memory foam and other foams, like latex are folded, they stretch. The stretching alters the size slightly when you unfold it, making the corners of each layer not line up properly. I notice that you do go back and cut the excess to make it even, but you can avoid the need to make those cuts and not waste foam by not folding it in half. Instead, lay it flat, exactly where it should lay as if it is already glued perfectly into position. Then, walk around the edge, slightly lifting the layer of foam and spray the glue in between the layers. You will then have perfect placement on corners because there is no stretch. You will not have to waste time, energy and materials making the corners even after you glue.
are you kidding ? it is prehistoric ..... the glue they used is the worst thing. you breathe that in your sleep ..... this factory is the worst thing i've seen in weeks.
@@ledocteurgonzo why would I kid? I'm no glue expert but I have been in the mattress manufacturing industry for 37 years and counting. I've worked for a few major brands over the years and although I most certainly have not seen it all, I've seen more than my fair share. I can appreciate what I saw here because I've had to carry out similar tasks without the kind of equipment they use here. Have you ever carved a giant oddly shaped foam boat mattress from a huge block of foam? I have. I used an electric turkey carving knife and about 5 cans of silicone to do it. My comment was about the facility, not the products they use. Perhaps your point is valid that they should be wearing more protection but let's not throw the baby out with the bath water here. They appear to have a very efficient program here and I am impressed.
Please use your top waste and bottom waste foam piece and stick on your trolley. When hot foam block falls on that trolley it will be damage from down. You can increase yield.
مرحبا. انا مش عارف ايه اللى انت فيها على خير يا طير. بس ما اعرف ليش هيك ما بين الجمعتين يا معلم انت عامل الناس بما فيها كل ما عليك سوى. بس ما اعرف ليش هيك ما بين الجمعتين يا معلم انت عامل الناس بما فيها كل ما عليك سوى. بس ما اعرف
What a wonderful factory!
I love that giant circular foam slitter.
I have a humble recommendation.
At 4:53 you are assembling a mattress.
I notice that you fold each layer in half, glue, then unfold the layer and lay it down.
What you are doing may seem faster and more productive but there is a better way that improves time, quality and craftsmanship.
When memory foam and other foams, like latex are folded, they stretch.
The stretching alters the size slightly when you unfold it, making the corners of each layer not line up properly.
I notice that you do go back and cut the excess to make it even, but you can avoid the need to make those cuts and not waste foam by not folding it in half.
Instead, lay it flat, exactly where it should lay as if it is already glued perfectly into position. Then, walk around the edge, slightly lifting the layer of foam and spray the glue in between the layers.
You will then have perfect placement on corners because there is no stretch.
You will not have to waste time, energy and materials making the corners even after you glue.
are you kidding ? it is prehistoric ..... the glue they used is the worst thing. you breathe that in your sleep ..... this factory is the worst thing i've seen in weeks.
@@ledocteurgonzo why would I kid?
I'm no glue expert but I have been in the mattress manufacturing industry for 37 years and counting.
I've worked for a few major brands over the years and although I most certainly have not seen it all, I've seen more than my fair share.
I can appreciate what I saw here because I've had to carry out similar tasks without the kind of equipment they use here.
Have you ever carved a giant oddly shaped foam boat mattress from a huge block of foam?
I have.
I used an electric turkey carving knife and about 5 cans of silicone to do it.
My comment was about the facility, not the products they use.
Perhaps your point is valid that they should be wearing more protection but let's not throw the baby out with the bath water here.
They appear to have a very efficient program here and I am impressed.
Thank you foe all your hard work
Please do some safety for the rotating table cutting person.
Imagine if they stop moving in the opposite direction in the rotating table..
Good working factory
Excellent work 👍
White mentos and Emery foam is onion and olive oil number 1 saving cost is white mentos and cement with colored line chalk
Good working 👍
Wow Beautiful #Greatskills
What was the tiny sponge for, good luck?
This is how our ancestors made foam beds!
Were foam beds a thing before?
@@muhaddesachowdhury1001 why do you think the ancient ones slept so well??
Please use your top waste and bottom waste foam piece and stick on your trolley. When hot foam block falls on that trolley it will be damage from down. You can increase yield.
What a goose!
Very good amazing people 🎉
Bạn ơi bạn quây chổ sản xuất bọc li long ,cho minh xem với.
Mày ngáo đá ít thôi 😂
6/7 fit 8" price??
Hello, I want such a mattress that is made, please
No eye protection, no hearing protection, no safety shoes...nice.
This is india
Why selling coat is so high?
6 By 6 ka matters kya rate me aayega ye video wala
1 layer sheet price??
👍👍👍💯
How can I buy this foam from you
thats very dangerous OMG that saw can cut man
Look kids it’s a merry go round from hell! Why don’t you go play, daddy’s got to choose his foam for his mattress.
😂🤣😂
I Think Sleep well Markit
workers without shoes? LoL
Without any safety for labours 😰
Scrap foam lete ho
Kahan per hai foam scrap hi
Hlo
@@kgnindore6103 number
@@kgnindore6103 mold pu fome scrap
Mere pass hai
Ok❤❤❤❤❤❤❤❤❤❤❤❤
Where in bangladesh
مرحبا. انا مش عارف ايه اللى انت فيها على خير يا طير. بس ما اعرف ليش هيك ما بين الجمعتين يا معلم انت عامل الناس بما فيها كل ما عليك سوى. بس ما اعرف ليش هيك ما بين الجمعتين يا معلم انت عامل الناس بما فيها كل ما عليك سوى. بس ما اعرف
really looks cheap quality mattresses
AUMENTEN 30 CM DE ALTO
Good work 👌👌🖕
Phone number bjo