So that job probably won't last long. The C2 and C3 power-shift clutches are black and brittle with lots of material on them, means clutches were slipping bad, slipping means O-Rings on the apply pistons are toast. New clutches won't last very long because pistons won't apply correctly. C1 clutch under planet gears needs to be spaced when re-installing housing otherwise 1 friction clutch will fall out of the splines. It didn't look like you spaced the housing before tightening the bolts. Forward and reverse clutches you didn't touch, very bad. Also you should have replaced all the needle bearings for the planet gears on the power Shift and your forward reverse clutches. Bearings are very cheap, $300 for all I own and run 14 Valtra T171 and I do gearboxes every 5000hours for safety, because when 1 20$ bearing collapses the damage caused is $20 000 no joke. Was interesting to watch, but not correct way to make gearbox reliable.
Bra jobbat👍. Intressant att följa när du skruvar.
Tack!
Riki kul att se på! Hälsningar från Pargas.
Tack ! till pargas var jag i sommrast med vattenskottern =)
Trevligt med en video på Svenska! 👍
Hur mycket kostade delarna?
Hesan Tack . Oj ööh ca 500€ plus olja och filter
Varifrån e du?
nyland . men traktorerna är i österbotten .
So that job probably won't last long. The C2 and C3 power-shift clutches are black and brittle with lots of material on them, means clutches were slipping bad, slipping means O-Rings on the apply pistons are toast. New clutches won't last very long because pistons won't apply correctly. C1 clutch under planet gears needs to be spaced when re-installing housing otherwise 1 friction clutch will fall out of the splines. It didn't look like you spaced the housing before tightening the bolts. Forward and reverse clutches you didn't touch, very bad. Also you should have replaced all the needle bearings for the planet gears on the power Shift and your forward reverse clutches. Bearings are very cheap, $300 for all
I own and run 14 Valtra T171 and I do gearboxes every 5000hours for safety, because when 1 20$ bearing collapses the damage caused is $20 000 no joke.
Was interesting to watch, but not correct way to make gearbox reliable.
سلام عليكم
Oletko joku Savolainen maajussi🚜
Ei. katso kanavaa