Equipment used as a mobile device, not fixed machines, requires the removal and removal of the dust collection hose. If it's the same diameter hose and connection hole, we can fit it in ourselves, but this is very cumbersome. I made equipment that can easily connect dust collection hoses and various equipment using magnets. In addition to mobile equipment, magnetic equipment of the same diameter anywhere makes it very convenient to connect the dust collection hose. I think it's a necessary equipment. Please refer to the video and make sure to make it.
I love this idea! Magsafe power connectors have kept me from destroying my laptop countless times over the years, and applying the same idea to vacuum hoses is one of those things I look at and say "of COURSE that's the way to do it!" Obvious after you see it!
There was a way like that. It wasn't that hard to remove, so I didn't consider it. I will definitely have to adopt your idea in an upgraded version. It's great to see ideas being shared and developed like this. Thank you.
That's a good comment. In fact, it is easy for magnets to break if they collide with each other. Instead, I did not cover the magnets in the tight holes because they are less likely to break, but I think it would be better to tape them as you suggested if I get the chance. thank you!
If you are the one who can figure out the details of my work process, I think I should be grateful. This means that you watched the video closely. Thank you very much!
Die Idee ist großartig. Nur an dem Ring bei dem Schlauch würde ich einen Griff oder einen Seil anbringen, damit der Schlauch durch ständiges Dran- und Abmachen nicht kaputt geht. Sonst ist es wirklich einfach, jedoch effektiv.
Es gibt eine Möglichkeit, das zu tun. Ich muss Ihre Worte berücksichtigen und verbessern. Danke! There is a way to do that. I'll have to take your words into consideration and upgrade. thank you!
자석을 참 좋아합니다. 우리가 핸들링 할수 있는 소재중에 가장 신비로운 소재입니다 우주의 4대힘 중에, 전자기력에 대한 이야기는 언젠가 꼭 해봐야 될 재밌는 주제죠. 아주 흥미로운 스토리가 될겁니다. 감사합니다. 그리고, 멋진 공방을 마련하시게 되길 바라고 응원하겠습니다.
Tolle idee, ich habe für meine Ladekable am Telefon usw. auch Magnetkupplungen, einziger nachteil in der Werkstatt und das wird diese gezeigten Kupplungen auch betreffen sie ziehen metallstaub an der z.b. beim Flexen entsteht, bei einer reinen Holzwerstatt kein Problem
Das ist ein guter Kommentar. sie haben Recht. Insbesondere haften mehr Eisenspäne an Magneten in der Nähe der Bohrmaschine. Es kann etwas nervig sein. Allerdings glaube ich, dass der Magnet am Staubsammelschlauch auch verhindert, dass Eisenstaub in den Staubsammler gesaugt wird. Ich denke eher, dass es eine gute Funktion sein könnte. Danke That's a good comment. you're right. In particular, more iron filings stick to magnets near the drill press. It may be a little annoying. However, I believe that the magnet on the dust collection hose also prevents iron dust from being sucked into the dust collector. Rather, I think it could be a good feature. thank you
Equipment used as a mobile device, not fixed machines, requires the removal and removal of the dust collection hose. If it's the same diameter hose and connection hole, we can fit it in ourselves, but this is very cumbersome.
I made equipment that can easily connect dust collection hoses and various equipment using magnets. In addition to mobile equipment, magnetic equipment of the same diameter anywhere makes it very convenient to connect the dust collection hose.
I think it's a necessary equipment. Please refer to the video and make sure to make it.
I love this idea! Magsafe power connectors have kept me from destroying my laptop countless times over the years, and applying the same idea to vacuum hoses is one of those things I look at and say "of COURSE that's the way to do it!" Obvious after you see it!
A good add on would be some kind of ear lobe shape on the ring so you can disconnect it without pulling on the hose directly.
There was a way like that. It wasn't that hard to remove, so I didn't consider it. I will definitely have to adopt your idea in an upgraded version. It's great to see ideas being shared and developed like this. Thank you.
Very nice! One suggestion: Place a strip or spot of tape over the magnets to protect them from breaking as they are very brittle.
That's a good comment. In fact, it is easy for magnets to break if they collide with each other. Instead, I did not cover the magnets in the tight holes because they are less likely to break, but I think it would be better to tape them as you suggested if I get the chance. thank you!
Your attention to detail is remarkable.Great idea.
If you are the one who can figure out the details of my work process, I think I should be grateful. This means that you watched the video closely. Thank you very much!
Like it! It's very convenient.
Thanks for your interest!!!
Terimakasih telah berbagi.
Kren...
Salam
Thanks for your interest and praise!!
Die Idee ist großartig. Nur an dem Ring bei dem Schlauch würde ich einen Griff oder einen Seil anbringen, damit der Schlauch durch ständiges Dran- und Abmachen nicht kaputt geht. Sonst ist es wirklich einfach, jedoch effektiv.
Es gibt eine Möglichkeit, das zu tun. Ich muss Ihre Worte berücksichtigen und verbessern. Danke!
There is a way to do that. I'll have to take your words into consideration and upgrade. thank you!
영상 잘 봤습니다.
자석의 활용이 무궁무진하네요.
지금은 못하고 있지만 저도 언젠간 제 개인 작업실(이라 부르는 놀이터) 가지게되면 응용 해봐야겠네요.
컨닝 아닙니다!!!ㅎㅎ
자석을 참 좋아합니다.
우리가 핸들링 할수 있는 소재중에 가장 신비로운 소재입니다
우주의 4대힘 중에, 전자기력에 대한 이야기는 언젠가 꼭 해봐야 될 재밌는 주제죠.
아주 흥미로운 스토리가 될겁니다.
감사합니다.
그리고, 멋진 공방을 마련하시게 되길 바라고 응원하겠습니다.
Nice idea!
Thanks for your praise!!!
Tolle idee, ich habe für meine Ladekable am Telefon usw. auch Magnetkupplungen, einziger nachteil in der Werkstatt und das wird diese gezeigten Kupplungen auch betreffen sie ziehen metallstaub an der z.b. beim Flexen entsteht, bei einer reinen Holzwerstatt kein Problem
Das ist ein guter Kommentar. sie haben Recht. Insbesondere haften mehr Eisenspäne an Magneten in der Nähe der Bohrmaschine. Es kann etwas nervig sein. Allerdings glaube ich, dass der Magnet am Staubsammelschlauch auch verhindert, dass Eisenstaub in den Staubsammler gesaugt wird. Ich denke eher, dass es eine gute Funktion sein könnte. Danke
That's a good comment. you're right. In particular, more iron filings stick to magnets near the drill press. It may be a little annoying. However, I believe that the magnet on the dust collection hose also prevents iron dust from being sucked into the dust collector. Rather, I think it could be a good feature. thank you
Brillant
Thanks for your praise!!
Grandios!
Thank you for your words of praise. I think it would be good for you to apply this idea too.
Thanks 🫡🫡