This Will Cost £10K In Parts Alone!! | Lamborghini Huracan: Part 2
Вставка
- Опубліковано 5 жов 2024
- We get stuck into the Lamborghini and discover the extent of the damage caused to the V10 engine... This could get expensive!
ORDER YOUR REP MERCH: 👉 reperformance....
If you enjoy the video, then hit the like button, leave a comment, tell your friends on socials and PLEASE don't forget to SUBSCRIBE! Thanks, guys!
#Huracan #Lamborghini #V10
www.motul.com
✅ Standalone engine management specialists Syvecs Ltd & MoTeC
✅ State of the art MAHA Dynamometers 4WD dyno facility
✅ Maintenance and tuning for R8, Lamborghini, Ferrari, McLaren
✅ Official Akrapovic Exhaust System dealers
-----------------------------
Check out Pro-Detail uk for Xpel paint protection film, Ceramic Pro nano coatings, paint correction, preparation & appearance
-----------------------------
📞01793278069
📱07786170031
📧info@REPerformance.co.uk
🌎www.REPerformance.co.uk
Follow us:
/ reperformance
/ reperformanceuk
Ricky, that GoPro wide angle footage is brilliant, it's so good to see the car being worked on up close and I love that it gives a better, easier-to-see general raw view compared to the usual part detail shots from the main camera with the shallower depth of field.
Even if it wasn't on purpose, it's definitely a happy accident, please use it more often!
Mitch is defo a top mechanic ! No swearing, Not covered in oil , No need for the elastoplast box .AMAZING
Fair play to Mitch getting that out on his own. Thats defo a 2 man job! Great content guys👍
Thanks
Not as horrendous as removing an engine from a Countach, if you’ve seen Harry Metcalfe’s car being worked on at Iain Tyrell’s garage. Still not easy though by the look of it.
Mitch on a mission... top work kid.. all solo too ❤...
Mitch sounds professional!! Great advert for the business.
Well done to Mitch! Good wee video!!
I like this. Someone actually working on motors on this channel. 😁
Thank you
@@REPerformanceUK
You're welcomed. I do love the content you publish. Keep it up son, we love it!
@@Iblis666fulthanks so much!! Glad you enjoy it!
I dread to think how many people have broke their selves maxing out their credit cards buying something like this … only for something to go wrong , then loose a SHT load of money when they can’t afford to fix it …
Nice job , nice content as usual and all made better with a dose of ricks humour.
Well that should tell you not to buy something on a card that you can't afford in the first place, or to maybe look up "People can be stupid"
Given the removal of some parts were not shown plus the hassle to wiggle engines like these out I think it goes someway to show why labour cost can cost as much as they do. Gives an appreciation of the patients needed when working on super cars. On top of that the learning and training on multiple manufacturers I take my hat off to you guys.
Love all the technical stuff great videos guys 👍
That GoPro footage is actually awesome Ricky - more of those! ☺
Great update vid nice to see abit more of Mitch in the vids
Top job and footage Mitch, hell of a job to get that lump of an engine out on your own 💪👍 I'm sure you lads will get it done 👍👍
Nice work Mitch, the only way that section could have been better was if there were time stamp on the shots
Do you sell longer Audi dipsticks as mine no longer reaches the oil?
Gm factory fix for oil surge on one model.
Shorter dip stick
Remember this day, the day Mitch started an AMSR only fans 😆
Enjoying the journey of this one - my fingers and toes are crossed it gets sorted and everyone is happy - it could be the first project completed - only if we all beliiiiieve though! I pray to the teabag gawds that it gets to go to the track day thing \o/
😂😂
Why does Mitch use a torch and not his phone when inspecting the engine coming out 🤣
Well done Mitch, u did a great job & not too bad video/audio skills, especially as its a 2 man job!
Hiya Kate 👋 xx
Thanks Andy.
Hi 👋 x
I’m liking before I watch , it’s gonna be good
Mitch is dynamite, he deserves a pay rise, he got that lambo engine and gearbox out in 12:41 sec… ❤😂😂🏆💯🆗🤷♂️💴👀
You are right Mitch. That did look exhausting 😁
Project might cost a lot more if the young lad drops the engine on his foot, stay safe guys :)
Those are safety shoes in a trainer style. Very common now, give toe and sole puncture protection. Not as good as a full boot because your ankles are not supported but perfectly acceptable in a flat workshop where ankle rolling is not a high risk.
Ricky loving this series and the channel overall keep up the great work. By the way fascinating W hatching engine taken out on GoPro
Have you ever seen a Lambo doing 100000 miles Toyota style with nothing but routine maintenance ?
🤣🤣🤣🤣
If the piston is ok its the best you could hope for.
You where always going to replace always going to replace all the valve train an extra camshaft is nothing, it would be less than the labor to strip the bottom end
Great video! Pulling a Lambo engine one up is some top spannering. Hope the POV video is cost efficient and we can see more of the technical side. Thanks for sharing 👍
Davla, Would a macro lens be worth the investment for you?
Exactly, the close ups ain't close up! Can't see any damage on that cam from 18inches away!!
Love that it is another Lambo vid' ! Been a Lambo fan for year, and ever since i knew Feruccio gave Enzo the Agincourt sign re his Ferarri and it's issues! Keep 'em comin' megga thanks to you and the Team :)
Hey up fellas looking forward to knowing why you think the vale spring failed and how did you manage to get snap on to paint that engine lift to mach your car ramp. Good video thanks
Are Gen1 R8 brake discs directional?
Also are there any brake pads you recommend that produce low dust?
Great content as always and look forward to seeing you next service 👍🏽
I don't mind it not being Timelapse good to see how he does it his way.
Couple things have music on lightly if anyone has been to litchfield you'll know.
Your working ontop of your self aswell clean up a bit as you go along
We don’t have music on in videos due to copyright claims.
Working on top of ourselves is just the pain of the workshop. It’s too small for us now. Everything goes on trolleys but the displaced parts on a job this size is massive!
Great video, love the more in depth stuff!
Awesome as usual but i need this quality content in 1440p minimum .......pleaseeeeeeeeeeeeeeeeeeeeeeee
Time lapse that engine bit next time haha
Yeah dav no-one wants to listen to me grunting for 5 mins lol 😂
@@MitchREP you did good mate that's a two person job and what's a bit ov grunting between friends
You know it’s going to be good when an early dad joke pops up🎉
At last, a project that might get completed , enjoyed that
Still a might! 😂🤪
Have a fab time on track day!
Only thing missing from this was a mankini 😂
Christ! He made a right meal of removing that engine - absolutely ridiculous! I hope you don’t pay him by the hour 😂
Springs ok. But why all new valves?
The problem started with the spring that broke. Honest question.
Why do all that work and leave in parts that have mileage? Typical race engine practice, better to put “good” valves in the bin than complete broken engines….
Is the issue just a random breakage / they do that sometimes ? Or a service / maintenance problem ? Was it a weak part ? Would love to win one of these but pockets no where near deep enough if the shit hits the fan !
Is it not easier to remove the engine cover, slide the assembly back a bit and remove it from the top?
I’m sure they would if it was 😉
I thought in seen a video called Lamborghini gave me a call, what happen to that?
“Going Broke Fixing The Cheapest Raffle Lamborghini: Part 2” 🗣️🗣️🗣️
Mitch sneaking in the dad joke. Qaulity.
Hi rick
Strange one but what's the make of your Gilltte
Would it have been prudent to replace just that row of valves along with the cam? I believe before you’ve said you don’t reuse old valve springs with a new cam.
Changed the cam, all valves and all springs….
@REPerformanceUK I guess my question was more, if you wanted to do it cheaper could you have replaced just the one cam and those 10 valves rather than all 40 valves? Thanks Ricky!
2:05 LMAO
😂
Could be worse, my bro has just paid £3k to fix a VW caddy 1.6tdi engine,
Bloody ell! Who edits this! 3:40 to 12:40 of a man pulling on and engine hoist! Thats 9 minutes of one shot! I hope you’re not paying Dav by the minute!!! Shocking editing!!!
Bloody hell, what a twatty comment! If you were remotely mechanically minded - that section you mentioned - is most interesting, and a testament to Mitch's ability in getting that lump out single-handed.
If you want fluffy highly edited content, basically showing little more than the before and after shots, may I suggest the latest offerings of Wheeler Dealers or some such shite???
Did you really need to change all the valves etc?
Why take the risk when you have done all that work to get there?
Did Mitch at some point work for Audi!? Cause he sounds like all the tech guys who send me a Service video 🤣🤣
I did! 🤣
@@MitchREP 🤣
What you mean he sounds like a wanker? 😂😂😂🤪🤪🤪🤪
@@REPerformanceUK ha ha... No no🤣🤣 I wish you could upload videos to these chats... Whenever I get service videos from the tech guys, it's always monotone videos, probably thinking - "We know you have been racing your bloody car" 😐😐🤣🤣
@mrgjs4044 I know what you mean, we did have to do them that way and I guess it's not rubbed off lol that or the fact it was 2am lol
Was that a Zoidberg intro? 😂
I fing love that car, nice one.
Is T shirt, shorts and soft toe trainers suitable PPE when removing an engine? Surely I would have thought steel toe caps would have been required. 🤔
They are steel toe caps, we wear trainer style ones as its easier to drive the cars 👍
You need some lights
sod it chuck a turbo diesel in it .....save u money over time😊
Did the engine have to come out to fix the top end?
Yeah unfortunately as you can't get the heads off with it in place, exhaust manifolds ect can only be taken off with the engine out really
Bedankt
Why replace all valves and springs when only one has failed? I get the principle if you were planning on keeping the car, for safety sake. But if flipping, then replace what broke and reuse what you can, no?
Would you want to buy the car someone cheaped out a repair on?
We do it properly because that’s how I work.
The people cutting corners on these types of cars end up with me getting repaired properly!
When you damage one shoe, you don’t just replace that one….you replace the pair!
Why can’t you buy aftermarket cams
No one makes any mate
how much do they weigh? Not for the faint hearted well done.
Probably around 300kg built up like that, big lump
300 ain't that bad for a lump that size but still a large thing to manoeuvre
I did say it’s too ouchy…
Evening you lot
Didn’t realise it was 6 just thinking what’s he on about 🤣
Labour was free but you made a decision to not do it so you pay a lot less then what anyone else would
What a horrendous job for something that should not fail in reality unless being raced....
My guess is totally crap spring material.... l reckon the conversation in the Lambo conference room with the engine R&D department was, shall we use the £1.99 valve springs or the £2.09 quality ones.... then the newly graduated shiny arse says, yes lets go with the £1.99 ones....
Then he gets promotion in record time for cutting production costs, perfect😅.
The above scenario is exactly what happened when l worked directly for a massive Swedish Truck manufacturer when the heads started dropping off exhaust valves & taking engines with it in the process, as most Truck drivers are experts in driving to destruction😅....
The best bit was, this was in the vehicle warranty period......oops😮.
You look a bit stressed mate
From 7 July 2024, all new cars will legally have to be fitted with a speed limiter
The UK is will be adopting the new speed limiting rules, even after Brexit
The driver will still be responsible for adhering to the speed limits
All new cars that are launching or have been launched in the European market need to be fitted with an Intelligent Speed Assist (ISA) by 7 July 2024 according to the 2019/2044 regulation by the European Commission. This means any existing unregistered cars on forecourts will have to be retrofitted with a speed limiter before they can be sold.
This mandate comes after the European Commission's legislation that made it a legal requirement for all new vehicles sold in Europe to be fitted with a speed limiter from 6 July 2022. All new cars in the UK will also have to follow these new road safety regulations despite leaving the EU, as even after Brexit, the UK has retained most EU laws for new cars. This mandate will help in standardising the car manufacturing process for different markets. Using speed limiters successfully would also be a step forward in developing self-driving cars in the UK.
2015 car
So not a £100 fix then 😂😂😂
👀
Don't know what it be like if you done like a couple of full engine rebuilds and put it on a time lapse might end up as popular as 'watch restoration' vids . Unless you think someone could slow down the time-lapse to normal speed and your "ARMING IDIOTS"
If that is a possibility ,edit out some key stages maybe.
Just a thought it might be hard to stop watching once you start , maybe some narration talking through the basics in lehmann's terms.
Maybe a time-lapse engine strip or re-fit . Not sure if you or anyone's done/doing similar. Just an idea I think would catch the shortterm attention span that's womed it's way into society . "Be like scrolling through instagram".
Keep up the good work. Your Workshop/garage AKA SURGERY is polar opposite to most's idea of a workshop . What was the alias 'GREASE MONKEY' FUCK MR MORE LIKE SURGEONS . PEACE OUT JAY MARSHALL
Done time lapse engine build vids and they tanked…time lapse stuff is boring!
Guys there’s just not consistency through these videos! You have a few projects now, but you need to provide fluidity or a constant underlining story through the start of the videos. Very sketchy uploads.
Boring
😂😂
It was just different do you really want all there video's to be the same, Mitch just showed us that this could be done on a driveway with basic tools