Amazing Ryet 3D printed Saddle - 1000 KM Review.
Вставка
- Опубліковано 29 сер 2024
- I have been using an inexpensive ($68) 3D printed saddle by Ryet, for some time now. I purchased it from AiExpress.
I have ridden over 1000KM and done several rides of over 4 hours.
I will answer the questions, how comfortable is it and how well made is it. I will also list my pros and cons as well as addressing some questions that were left on my original video.
Been using this exact saddle for almost 2 years now with approximately 6,000km+ on it.
Comfort: 9/10
Value: 10/10
Durability: 10/10 so far
I am glad you like it.
I'm a 3D printer and designer and a biker myself. It wouldn't be hard or cost any more to add an outer skin to these, but we have to remember that the more expensive 3D printed saddles are printed using a Nylon Resin, whereas these cheaper ones are printed on a filament printer with TPU filament plastic honeycomb. But it's definitely always worth testing these prints! I know for a fact it would cost more than 34p to print it! The price they charge is to pay for the maintenance of these Carbon model printers that are used in the dental industry more than anything! I am about to Order this saddle to test for myself as got abit of a sore with my new mimic power yesterday
Thank you for some fantastic information and insider knowledge. Good luck with your new saddle.
Well, for anyone considering this saddle, all I can say is that your mileage may vary. I also own this exact saddle and I put it on my gravel bike (which is ridden primarily on the road, with an occasional dirt road thrown in the mix). I also own the Fizik Vento Argo R1 Adaptive saddle which is on my road bike. There is no comparison. The Fizik is much, much, MUCH more comfortable for me. The big difference is in the thickness of the 3D printed material. The Fizik is about twice as thick in the area where I sit, and the material is a bit firmer as well. The Ryet is comparatively thin and when I am sitting on the saddle I can easily feel the stiff carbon shell hitting my sit bones. For reference, I am 6' tall (184cm) and I weigh 176lb (80kg). In fact, I just ordered another Fizik (the R3) for my gravel bike. I don't regret trying the Ryet, it was inexpensive and it is well made, but it wasn't for me. I would say that if you weigh 150lb or less, then this might be a great lightweight saddle for you, but at my weight it just didn't provide enough cushion.
I have the Ryat on 3 of my bikes.(road mtb & zwift bike) Been using them for around 18 months & can honestly say they have been faultless & one of the best saddles I have ever owned.
This is great to hear.
I have the zeus and the bucklos saddles from Ali and they are both great. After they proved decent I also did more research and got a Spexcal bib and Chaoyang gravel tires and have been happy considering the low cost, they were all amazing.
I am so happy that you have managed to find some affordable gems as well Jakob.
Good feedback on the reviews.
I'm always looking for comfort on my rides, saddles are a touchy subject as everyone is different.
Bob...
Absolutely right Bob. I am actually thinking of doing a beginners guide to choosing a saddle.
Talking of saddles, I bought new one for my road bike a few months ago. My old saddle had a few strips of gaffer tape to make it rideable. I still haven’t put on the new saddle. The old one is still holding up pretty well! The road bike spends most of its time on an ergo trainer so I won’t get embarrassed by appearing in public with the old saddle.
When you find a saddle that works, use it until it disintegrates!! I would also try to see if I could replace it with the same.
I really enjoyed your balanced approach and commentary, subscribed!
Thank you.
Thanks for this. I just ordered one from Temu. Every time I selected one on Aliexpress, it told me it didn't ship to my location. Which is weird, since I don't live too far from you. Thanks for the review.👍🙂🚴♀️
That is really odd. I hope it works out for you.
First off: Love the Daniel Johnston shirt!!
I’m so glad your experience with the Ryet has been good because I’m thinking of getting one too!
I actually thought that you would probably be one of the only people who would get it!!!
The T-shirt?
@@carstenhm What do you mean?
I have a couple of Ryet saddles. For the price they are superb👍
100% agree.
On the topic of Aliexpress gems there's an exceptional bike light called Towild BR800. They've used high CR led, instead of normal blue ish mess. So the light it emits looks way more natural and pleasant. It was just $11 and imo is better than my Fenix light that cost me around 80. Also has usb c charge port and replaceable battery unlike Fenix.
I shall be checking that out!!
Thanks bro! Is was thinking of buying Fenix BCR26 is that the one you are referring to?
@@jonhalda no. My Fenix is quite old.
Yeah, the bumpy trail test is what matters to me the most. That and the manufacturing quality--if I find a good one, I don't want it to break and have to go through this trial-and-error process again.
Totally right. I have tried several different saddles working out what is best for me.
2 months ago, I watched a similar review of a 3d printed saddle on aliexpress by the yt channel "everything's been done" who praised that saddle model similarly as you did with this one. So I obviously ordered it, but the second i sat down on my bike it was incredibly hurtful. Upon closer inspection, I noticed the edge around the middle cutout was raised about 1mm on the saddle I recieved, and that edge was stone hard unlike the rest of the material and cut into my bones. So it seems at least some aliexpress sellers might have multiple production lines with massivly varying quality and just aren't as reliable as official brands. I have to say though the return worked perfeclty although I even scratched the saddle, which made this aliexpress experience way less frustrating.
I am glad that the return worked out for you. I can totally believe that consistency across all products is not assured so it is just as well that they make it easy to return.
Thank you for the review :)
You are welcome!!
I had a very strange experience with this saddle. For the first two rides, it was one of the most comfortable saddles I have ever used. But after that, it became extremely uncomfortable, I could barely ride for 10 km, it felt like it was made of spikes. I inspected the saddle closely, but I couldn't figure out what have happened.
That's wild and I have absolutely no idea why that might have happened.
Return is very easy in the USA. You return to a local facility.
This is what I am hearing from a lot of people.
Does the honeycomb wear on your bike bibs?
I have not noticed it doing that yet, but I have not paid a huge amount of notice to it. I think it the wear was extreme, I would have noticed
There seem to be many listings for the Ryet 3D printed saddle on Ali. Is there a specific vendor you recommend or link you can provide. Many listings seem to be incredibly inexpensive for a 3D printed saddle. Thank you.
I believe that they would all be more or less identical and so then it comes to two things; price and who has a decent return policy. Price is an easy one to work out but as for returns, if you have a quick scroll through the comments, there is one where the commentor says what a great returns experience they had. Ask them, specifically which one they purchased.
@@cardiaccyclist7477Very helpful and sincerely appreciated. Enjoy the journey and stay safe.
There are a few different saddle designs from ryet and also a carbon and a plastic version (the Zeus he had is also available from Ryet, I got that for around 25€). Carbon is more expensive
Have you noticed any wear on your bretelle due to the 3D printing format?
I am not sure what bretelle is, but using google translate, the best guess I have is that you are referring to bib shorts. There has been no noticeable wear on my bib shorts.
@@cardiaccyclist7477
Yup I am a Brit living in Brazil and bretelle is bib shorts. 😉
Comparable to sella italia slr super flow?
The only Sella Italia I had was not very comfortable for me.
So it seems that it’s a bit of a crap shoot…
I bought a chainring from o r of those online sites…price was great, but the chaining I received was soooo bad, it was laughable!!
That said, when I contacted the retailer, they apologized and refunded me, and I have an interesting conversation piece!
That is great that they refunded you. I think many people are misguided in thinking that all of these companies will just ignore you if there is an issue.
What is your sit bone width?
My sit bone width is 129mm
Rails round or oval?
Round.
@@cardiaccyclist7477 someone else said they're oval.
@@DanTuber My apologies, yes they are oval.
@@cardiaccyclist7477 was your previous saddle oval rails too? I'm wondering if a different seat clamp (7 x 9 mm) is needed for the oval rails like some people claim?
@@sanj-mthey fit wihout issues on my bike, and previous saddle was regular round
imho these saddles are rubbish, one pattern - no variation leading to pressure points and sagging, The entire purpose of the concept was for pressure relief and firmness where its is needed.
These are excellent points made by somebody who clearly has a lot of expertise on the subject. This is why I don't understand why, after rides of up to 6 hours in length over rough gravel trails, I feel no pain, discomfort, pressure points or sagging and believe this to be the most comfortable saddle I have used. IMHO
@@cardiaccyclist7477
Love this reply 😅