Thank you so much for this video ! You made it super simple and I appreciate the fact that you left measurements. I’m currently dealing with this. Thanks again !
Hey thanks for the comment, I am going to have the torque specs available on the description by Monday. If you end up waiting till then I can have the specs in the description box by then
I have the same corolla hybrid 2020 hatchback and at 18k miles both front bearings failed, also had steering rack replaced, and couple of bushings because of rattling noise, all good now but i am very disappointed with Toyota, i am thinking of selling the car while its still under factory guarantee,
question man i’m pretty knowledgeable about cars and i have a 2021 hatch and was wondering im getting some tire noise not too bad i jacked car up and shook the wheels back and forth and up and down had zero play and i have no squeaking just wondering what you think it is tires are original tires and car has 40,000
@@alphag5240 nope - airbag light, power steering, and engine light turned off when I unplugged the battery and let it sit for a day but everything came right back on when I drove it (assuming cause the speed sensor isn’t working) My bearings were also seized and we had to torch it.
I'm watching this because I suspect mine is bad. I hit a monster of a pothole on the highway. The type of pothole that has you yell "HOLY FUCK" and pull over at the next exit to check if anything is broken.
New cars these days lack quality wheel bearings already being replaced it’s a 2020 wheel bearings shouldn’t be bad after 1 year or 2 u can buy a car from early 2000s and the wheel bearings last 150 to 200 thousand miles never replaced u got these brand new cars these days 2022 2021 Hyundai elantras transmissions crap out brand new with only 2000 miles on them if that transmissions going bad on brand new altimas maximas with only a couple hundred miles on them I had a 2022 Camry thing already needed new rotors not even 1000 miles on the dash already had a brake vibration when u got a 2008 Lexus es350 with 100 thousand miles same rotors same wheel bearings same struts they aren’t makeing cars like they use to these new cars are so cheaply made the quality in parts agent down hill even oem dealer parts I’ve got were junk out the box brand new makeing these new cars with cvt transmissions smh not smart at all new cars are junk
It did help for sure. Very knowledgeable. For someone like me that is capable but lacking the knowledge of how to this was terrific.
Thank you so much for this video ! You made it super simple and I appreciate the fact that you left measurements. I’m currently dealing with this. Thanks again !
Pull out the speed sensor first or be ready to pay close to $300
For a New one.
Thank you kindly Dear Sir 🙏
jiffylube tech here. Coworker Didnt use a punch, threads on axle are shredded and axle nut wont come off. Fun day.
What are the torque specs on hub bolt and axle nut on 2021 Toyota Corolla LE in foot pounds
What are the torque for the axle nut
And the 3 bolt on the hub ?
I’m working on a 2021
Can you recommend me a good bearing brand for my 2020 Corolla please
Do you have all the torque specs or can you list them in the description?
Did u figure this out?
How many pounds of torque should I tighten the axle shaft nut to?
216
Everything, went smooth until having to put the caliper back on. It won’t fit over the break pads maybe needs an inch of clearance
Didn’t realize you have to use a c-clamp to push your caliper piston back in if your replacing your brake pads with new ones.
Great video! Thank you for this, tackling same job tomorrow. What are the torque specs for the hub assembly bolts and the axle nut?
Hey thanks for the comment, I am going to have the torque specs available on the description by Monday. If you end up waiting till then I can have the specs in the description box by then
@@GEARMOAUTO 159 on the axle nut and 96 on the hub to knuckle bolts. That top bolt was a PIA lol.
How did it go? Mine is seized rusted to knuckle and ended up with dashlights even tho I removed sensor on time
Is the rubber mallet necessary or I can do it without it?
I would recommend it. Unless you are replacing the rotor, have at it with banging it out.
I have the same corolla hybrid 2020 hatchback and at 18k miles both front bearings failed, also had steering rack replaced, and couple of bushings because of rattling noise, all good now but i am very disappointed with Toyota, i am thinking of selling the car while its still under factory guarantee,
That’s crazy. I have 180k miles on my 19 hatchback. Only just now having a rattling sound (bushings I think) and one wheel bearing out.
Do you need to do a wheel alignment afterward?
Shouldn’t change anything unless you mess with the tie rod
question man i’m pretty knowledgeable about cars and i have a 2021 hatch and was wondering im getting some tire noise not too bad i jacked car up and shook the wheels back and forth and up and down had zero play and i have no squeaking just wondering what you think it is tires are original tires and car has 40,000
How to get it lose ???
The ball bearing does not come out
What was the mileage in km of this vehicle
I don't remember but it was low mileage. It had bearing damage due to a impact on a curb
I had the same issue on 22k km
How did you end up clearing all the dash lights? I have Christmas lights on
Did you damage something?
@@alphag5240no - car drives perfect. But lights won’t reset itself
Were u able to clear them? I ended up w same and couldn't even replace hub... its seized
Shit
@@alphag5240 nope - airbag light, power steering, and engine light turned off when I unplugged the battery and let it sit for a day but everything came right back on when I drove it (assuming cause the speed sensor isn’t working)
My bearings were also seized and we had to torch it.
Did u get it scanned? 😅 I did it on my brother's car damn lol
How does the wheel bearing go bad on such a new car? Is this common?
They hit a curb
@@GEARMOAUTO I hit the curb too on a snowy day, and then I installed a part from UAE that was terrible, I am changing it again with an original one!
I'm watching this because I suspect mine is bad. I hit a monster of a pothole on the highway. The type of pothole that has you yell "HOLY FUCK" and pull over at the next exit to check if anything is broken.
Thank you
Thank you 👏
New cars these days lack quality wheel bearings already being replaced it’s a 2020 wheel bearings shouldn’t be bad after 1 year or 2 u can buy a car from early 2000s and the wheel bearings last 150 to 200 thousand miles never replaced u got these brand new cars these days 2022 2021 Hyundai elantras transmissions crap out brand new with only 2000 miles on them if that transmissions going bad on brand new altimas maximas with only a couple hundred miles on them I had a 2022 Camry thing already needed new rotors not even 1000 miles on the dash already had a brake vibration when u got a 2008 Lexus es350 with 100 thousand miles same rotors same wheel bearings same struts they aren’t makeing cars like they use to these new cars are so cheaply made the quality in parts agent down hill even oem dealer parts I’ve got were junk out the box brand new makeing these new cars with cvt transmissions smh not smart at all new cars are junk
Everything's made in china and i mean everything, when the time comes, they got us all by the balls.
This car haybrid
Failed to mention year, make, model, sub model, and engine size. Instant thumbs down 👎🏽
Hi, the lavoration for the hybrid version is the same?
thank you