This wobble is so common. I have the M4 too and the component between the adjustable Rod and the bottom bar became loose due to riding. It's a design fault the screws become worn from too much movement. I took it to a welder and put two metal plates each side and bolted the two components together so now it acts as one big Rod. Downside is I can't adjust the height but that's minor.
Go into the settings and change the magnet from 30 to 10 and you unlock your speed settings to 99klm or 63mph , it tells the motor that your wheel is spinning slower and you get turbo mode
@@missreid86 sorry no video, go into the settings on number 7, and change the settings from 30 to 20 or 10 , as soon as your on the scooter you will notice the speed increase,
Kugoo M4 Pro is a verry good scooter...I have it for nearly a month....I've already done 120 miles with it and no problems whatsoever...I hope that they will legalize them next year....so we can ride them without any problems on the roads...keep up with the good work!
Hi, I noticed you said you have a m4 pro, I have one as well but recently after 100 miles, my motor wheel has been causing alot of vibrations, have u noticed the same? ,thanks alot
Nice vid mate can’t wait to see an other one😀. Drive near a beach or something that will be a great video. And thanks that u showed the wobbly stem thing.
dude what handlebar did you get? I have the ienyrid m4 pro s. basically the same scooter. my foldable bars keep coming loose while riding. can you share with me what all you needed to change yours?
Is it possible to wire parallel battery? Have you heard of that before? I seen people do it on these and had 60-70km range even with 3th gear all time ..
Hello mate, I've tighten the bolt at the end of the stem until the handlebar would become stiffer to turn but the play was still there. Pulled out the bolt, put it back in, even installed a washer at the base of the stem, but still no luck. Until I've notice the most of the play come from the folding macanism. Any idea how to adjust that? Thnx in advance.
Okay is the hook type lever looser than it used to be? If you flip the scooter you will see a silver nut on a long thread. You need to get a deep socket on that and tighten, that should firm things up
@@bill-e6114 cheers mate, I'll try when I'll get home. I've no idea how tight that use to be, because the scooter was a resealed item and it came already assembled. Thnx!
@@bill-e6114 ok, quick update: I've manage to tighten up everything. It's a whole new scooter now, rides extremly well, but the big question, how do i keep them bolts tight now, because i think they are going to get loose again in a few miles. Thanks a million !
How has it been for you so far? And where would you recommend to buy it from , I've been seeing it on AliExpress for roughly £350 from a warehouse in Moscow
have you ordered it from aliexpress? and if so how quick did it come and is it good quality? looking into getting one as the xiaomi 1s and m365 isnt for me
Hi like you vid but I have a question...I notice that I have a knocking from the stem or its the front springs bottoming out...ANY ideas how to stop it
I am getting 35km range on 2&3 gear so far , still testing max range . Battery goes to 54.2 and I think I can easily get 40km range on 2 gear . I am 100kg , guys 60-75 probably going to get +20%-30% on the range . I also noticed my max speed on the even road is 35-38kmp but from little hills I got 45-48 kmp.
@@bill-e6114 brilliant would really love to see that because i dont want to mess up my m4 pro in anyway plus im someone thats better when shown if that makes sense lol 👍
This an old 25.4mm handlebar I had laying around. I wrapped it and 3d printed a spacer for it to fit on a 31.8mm stem. Any 31.8mm handlebar should fit the pro's stem😃
If your already carrying speed up a hill it is fine and will pull up them. If you try to go up a steep hill from a standing start or slow speed it struggles. Its because it has a soft start and this limits the power pulling away
There's nothing in the settings that will do it. You need a higher voltage battery and controller. Battery is a problem as getting an off the shelf 52,60,72 volt ones are too high for the shallow deck
I'm going to cover it in a new video, but normally just one bolt needs threadlocking and tightening at the bottom of the inside of the stem. Really simple once you have the tools
Hi mate just Purchased the m4 pro have you or is there any way to up the performance in the settings good scooter but thought it would pull more up hill
I'm in Lincolnshire bud. Those new Phantoms look amazing, I love the display. Its up to you, I ride regardless of what anyone thinks. At the end of the day all of them are illegal to ride in public so what does it matter if its a powerful one
Thanks I watched this to help the wobbly stem and helped a lot and did u manage to mod it and get more power because I wanna bit more power and have no idea how to do it
@@bill-e6114 so I can buy another stem that will fit my stem hole, I tryed looking for a different stem but couldn't find 1 anywhere to buy, do you know where i can buy one
No matter what I type in my search for handlebar or handlebar stem or handlebar pole or handlebar riser, I cannot find your handlebar,s or the parts to make myself anywhere, I can't find the pole anywhere on any buying app , all I can find is the clamp to hold the handlebar and stem,, iv even been on there web site and they don't sell them for m4 pro,
@@bill-e6114 i know that, your not getting what I mean, the long down pole that the clamp and handlebar sit on, there's 3 peaces, 1 the handlebar. 2 the clamp. 3 the down pole. Which is only 25cm wide, I cannot find this part anywhere
Suspension it's loud,you need take it off springs and make soft washers on the bottom and top of them,then fix everything together, effect- silent suspension 😉
Hi mate I've got the same problem with my Solar P1 scooter it's loud going over uneven terrain and sounds like it's falling apart 😂. But its not really. Could you be more in detail as to how to do it I'm really interested in trying and also is it necessary to take of the suspension completely.
I have my volume on mute. So you only used threadlock on that hex bolt and it fixed the wobble? I done this few times already and the wobble will come back after a week of jumping off curbs and jumping the 15mph speed bumps going 25mph. I used threadlock and put bigger washers. I was hoping there is a whole new system of front wheel and stem to put on that doesn't have the problem.
For me, its worked a treat. Some people have used shake proof washers and reported good results. Try some of the JB weld super threadlock as thats what I used the first time and it locked down tight
@@bill-e6114 grease your steering bearing before putting it all back together! Haha. I put some marine grease into the steering bearing due to rust issues from riding in rain and snow. Now is just fixing that wobble. I ordered the jb weld lock tight and different locking washers.
Any 31.8mm bars should fit, these ones I just had laying around but they were 25.4mm so needed a spacer. It's real easy to fix the wobbly stem with the extensions, just use quality red threadlock on the bolt or it will work its way loose again
Hi buddy , what size diameter bars have you used to convert , as I think with this conversion you've done looks slick, as I may order a new mtb stem red , and new bars , my scooter doesn't arrive for 2 weeks
These are 25.4mm handlebars with a 31.8mm to 25.4mm spacer used on the stem. So much more control with these bars its definitely worth converting. Just keep gathering your mod parts til it comes, then you've got a beast😁
@@bill-e6114 hi sorry to bother but do you think you could link the handlebar? I’ve done all the adjustments on my M4 pro, I just need to switch to a new handlebar which I know nothing of. Your looks like it does the job, as it doesn’t wobble or turn on its own. I’d be very grateful if you could tell me where to order the handlebar from! Appreciated, A fellow rider.
I've got a Solar P1 I bought it without the seat about 2 weeks ago. Let me tell you this, every single day I wish I had a seat and can't wait to purchase one very soon. It's just Soo much more relaxing to be able to sit and travel that's my personal opinion. Even if you have a seat doesn't mean you can't stand when u feel like it. When I accelerate on p7 setting on the thing pulls like a train and spinning wheels and holding on for deal life. The issue is the acceleration and declaration rocks you back and forth and with a seat I feel that issue would be minimized and less hearthache lol
I have went down the exact same road as yourself. Bought the M4 pro and I do love it. Just wanted a bit more power. Now received my G booster, however the locking pin that secures the front stem from folding was badly bent due to transit. All built up and ready to go as soon as my new part comes from Kugoo. Please note that the valve stem to inflate your tyres come out to meet the disc brakes, with very little room for manoeuvre. So buy yourself the 90 degree valve extensions or you'll be forever frustrated!
It doesn't take long before you want more does it 😁 I've seen that's quite a common one with the screw part on the locking pin. Mine has a slight bit of curvature to it but its okay. Might see if I can get a replacement too Thanks for the tip! Yeah mines got the straight valves on it, so I suppose sliming it is going to be hard work
@@elijahreid8283 Not sure mate, might be something that needs fabricating. I've seen people using clamps to keep theirs up when that happens. Ball ache to fold back up though
i got the g2 pro 1000 watt 15ah one and yes i think the g2 pro is better and looks better faster aswell but yes i had a wobble when i was doing 30 mph and i hit a bump i got a little wobble so i upgraded the stem and put some 29 inch wide wake bar,s and that made all the difference i got the same front lights that you got on your g,booster, on my g2 pro. i do like the g,booster fast little scooter
How much is a g booster billy? Is it a new scooter or a part to make the scooter faster? I have the same 1 as u and interested. Were u from mate? I am merseyside. Id love support to fit mine if it makes it faster
@@daymul872 Yes its a new scooter buddy, they are around 900 but they have ridiculous acceleration and seem to be so much more solid. I'm in Lincolnshire bud so a bit far away. You can definitely make the M4 have more torque with a new controller which I'll be fitting soon and will help you if you decide its something you would like to do 🙂
Never ever thought one day I will be watching these videos. I must say a big thank you to yourself mate. After watching one video from you I went and got the m4 pro and ngl im.scared as fuck when I get on the road but after putting the seat I feel like an actual motor bike and make its easy riding on roads . only thing im.getting confused about is.. are we allowed on these roads?
Thats good to hear buddy, kind of makes it worthwhile making these vids seeing comments like this. Yeah being stood up is so much scarier compared to the seat and I will keep on arguing that its safer and more stable. Technically not allowed but it's something a we are kind of getting away with for now until a clamp down
Using the seat takes weight off the front wheel and will cause to wobble around over bumps. It's sketchy if in the bike lane and cars are next to ya. It's better to stand which will put more weight on that front wheel. Or just a wider front tire than the stock m4 pro.
If anyone else is looking for a way to loosen the steering wheel for this old machine. After adjustment, pour elastic glue over the adjustment screws inside.
Probably Sunday or Monday but will try to get one out sooner. It was supposed to be a first ride on the G Booster, but it sort of broke during filming 😭
My m4 jyst stopped I opend it up the wiring was atrocious the wires was jyst twisted together then covered in insulation tape and that was lose anyways the brain on them is just put in them so knock and rattle like mad it broke of a solder in the brain. So if yours break down its mo doubt something broke in the brain.quiet easy if you can solder
I have a serius problem with the "stick", from the first ride it take slack and moves almost 2 cm in high zone. Driveable but not safe XD And one part of the dumpers was unscrewed and I can't put it again. For last, flat tyre 2 days ago :( The valve is a fucking shit!! Is imposible to use any air bomb!!!
This wobble is so common. I have the M4 too and the component between the adjustable Rod and the bottom bar became loose due to riding. It's a design fault the screws become worn from too much movement. I took it to a welder and put two metal plates each side and bolted the two components together so now it acts as one big Rod. Downside is I can't adjust the height but that's minor.
Luckily I haven't had that problem yet, how many miles did it take to wear it down to that stage? Good solution if it means you can keep on riding it
Anyway you can show a photo of it so can do the same with my scooter or address of this welder so can visit please.
@@bill-e6114 hardly any Miles I'd say first 10miles or so
I've never had that problem either and I've rode 100s of miles on mine. I'd like to say at least 450 miles 😊
*Hey Billy* I would love to see an update on your M4 pro like recent update!
Go into the settings and change the magnet from 30 to 10 and you unlock your speed settings to 99klm or 63mph , it tells the motor that your wheel is spinning slower and you get turbo mode
James kirby have you got a video to show how that works or would you like to help a lady out 😀
@@missreid86 sorry no video, go into the settings on number 7, and change the settings from 30 to 20 or 10 , as soon as your on the scooter you will notice the speed increase,
The speed shows a increase on display haven't tried it yet will do shortly hope it works
Feels quicker anyway :) next step is shunt mod on controller :)
Kugoo M4 Pro is a verry good scooter...I have it for nearly a month....I've already done 120 miles with it and no problems whatsoever...I hope that they will legalize them next year....so we can ride them without any problems on the roads...keep up with the good work!
We can only hope and pray! Hopefully once this pandemic is over they will see sense and make them legal
5:27 Your Kugoo make sound like my Kugoo, what is that sound when you get over bumps ?
What handle bars are those?
Can't wait to see the upgrades and the faster M4 with quicker acceleration. Please put links up as I will deffo be upgrading mine
Hi, I noticed you said you have a m4 pro, I have one as well but recently after 100 miles, my motor wheel has been causing alot of vibrations, have u noticed the same? ,thanks alot
Nice vid mate can’t wait to see an other one😀. Drive near a beach or something that will be a great video. And thanks that u showed the wobbly stem thing.
Really glad you enjoyed it! Will do some more beach vids soon 😁
Can you tell me what size handlebar fits straight onto the kugoo m4 pro and if I need anything else. Cheers.
dude what handlebar did you get? I have the ienyrid m4 pro s. basically the same scooter. my foldable bars keep coming loose while riding. can you share with me what all you needed to change yours?
Hi, could you tell me how you tightened the stem to stop the wobble? I have the same issue
Thanks man, this helped with my m4 a lot
Is it possible to wire parallel battery? Have you heard of that before? I seen people do it on these and had 60-70km range even with 3th gear all time ..
How did you fix your stem, I have a similar scooter. Can you make a video on that?
Will do soon, on this one it was just getting to the nut to tighten and threadlock
@@bill-e6114 still waiting for thar video. I've seen others but I don't speak Russian
@@bill-e6114 Hi, are u going to make a quick video on how to fix the wobbly stem?
Hi have to samé m4 500w motor húb I want buy 1000w controller any difference?
What is the red threadlock for? Is it to be applied on the bolt?
Yeah its like a glue that stops the bolt unscrewing itself
Hello mate, I've tighten the bolt at the end of the stem until the handlebar would become stiffer to turn but the play was still there. Pulled out the bolt, put it back in, even installed a washer at the base of the stem, but still no luck. Until I've notice the most of the play come from the folding macanism. Any idea how to adjust that? Thnx in advance.
Okay is the hook type lever looser than it used to be? If you flip the scooter you will see a silver nut on a long thread. You need to get a deep socket on that and tighten, that should firm things up
@@bill-e6114 cheers mate, I'll try when I'll get home. I've no idea how tight that use to be, because the scooter was a resealed item and it came already assembled. Thnx!
@@bill-e6114 ok, quick update: I've manage to tighten up everything. It's a whole new scooter now, rides extremly well, but the big question, how do i keep them bolts tight now, because i think they are going to get loose again in a few miles. Thanks a million !
Oh thats good then bud, they need constant tightening but you can limit it by using high strength threadlock
@@bill-e6114 BTW, I'm riding my scooter top speed each way to work, what average range can I expect from it?
What’s everyone’s top speed on ur kugoo m4 pros
I hit around 28-29mph and I weigh 13Stones 162lbs and have my work backpack which is heavy aswell. So has good power and tork to it
Link for the handlebars bro?
How has it been for you so far? And where would you recommend to buy it from , I've been seeing it on AliExpress for roughly £350 from a warehouse in Moscow
Mines been fine, still going strong. Hopefully its legit, just buy from sellers with good ratings and it should be fine
have you ordered it from aliexpress? and if so how quick did it come and is it good quality? looking into getting one as the xiaomi 1s and m365 isnt for me
I got my m4 pro for £350 off a mate need to know if I can increase top cruising speed
Hi like you vid but I have a question...I notice that I have a knocking from the stem or its the front springs bottoming out...ANY ideas how to stop it
Have you secured your controller? That knocks unless its secured
Whats the range per charge as im sure 60km isnt right for the 16ah battery?
I wouldn't say it'll get 60km unless youbstay in gear 1, mix of 2 and 3 you should get around 40km maybe
In my experience, i never achieve more than 23km on one charge. My weight is 100 kg and i use second and third gear.
I am getting 35km range on 2&3 gear so far , still testing max range . Battery goes to 54.2 and I think I can easily get 40km range on 2 gear . I am 100kg , guys 60-75 probably going to get +20%-30% on the range . I also noticed my max speed on the even road is 35-38kmp but from little hills I got 45-48 kmp.
This is handlebar bike?
One more question i want to use a UK plug as mine is eu what amp plug do i need please? thank you for your help last time too.
This will do perfect, 4£ delivered. They don't need hardly any power as its only 2A charging
www.ebay.co.uk/itm/312599369166
@@bill-e6114 thank you so much
Hey billy any chance on a video tutorial on how to fix the wobbly stem ?
I may do one soon seen as its the most common issue with them. Its really simple to fix too, definitely a diy job
@@bill-e6114 brilliant would really love to see that because i dont want to mess up my m4 pro in anyway plus im someone thats better when shown if that makes sense lol 👍
@@bill-e6114 hey billy in order to remove the 3 bolts to pop out the bar does that just require allen key ?
@@GOONABIS Yes bud, just go easy not to round anything off and you'll be good
Where did you get the handlebar? Is it a kit? I really want it, cant find it anywhere
This an old 25.4mm handlebar I had laying around. I wrapped it and 3d printed a spacer for it to fit on a 31.8mm stem. Any 31.8mm handlebar should fit the pro's stem😃
Been looking forward to your update I use mine for everything now their great
Good to hear mate! They are great scooters just need the odd things sorting
I went flying off mine due to a faulty motor
@@mahmoodhussain5778 Did it just lock up?
Sorry to hear that arshad Yousaf hope your ok
Off roading is fun on these on a forest drive through
Hi I don’t know if you can help the Bearing has broke on my m4 steering could you help
Hey bro i have an other question.
Is the place where u put ur feet wide?
Can u please measure the width in cm?
Thanks if u respond mate.
Hi bud, yes its around 20cm in width at the widest point
Hope that helps
@@bill-e6114 thanks mate u are really helpful.I appriciate that u make honest reviews i think that the other reviews are fake. Keep ur videos up mate😀
How good is this at hills, has it her really struggled or stopped up steeper hills?
If your already carrying speed up a hill it is fine and will pull up them. If you try to go up a steep hill from a standing start or slow speed it struggles. Its because it has a soft start and this limits the power pulling away
@@bill-e6114 okay thankyou
How do u change the power to make it go faster than 45km I know there's a way to do it. Can anyone tell me genuinely
There's nothing in the settings that will do it. You need a higher voltage battery and controller. Battery is a problem as getting an off the shelf 52,60,72 volt ones are too high for the shallow deck
@@bill-e6114 dam :( thanks for telling me so I won't fiddle around with the settings 🤣 I love your videos I enjoy watching you mess about on it 😀
@@deiselthebelgianmalinois8387 Thanks bud, I love riding them. Just getting a bit harder to ride atm, always looking over your shoulder 🤨
Hey billy, mind if I ask what is the length measurement of the handlebars? Thanks
I think these were 680mm bud
@@bill-e6114 Thanks man, helped a lot👌🏼
Can you derestrict this?
So what's the stem your using I mean its not a A head so what stem is that long etc..?
Standard stem that comes with the pro
Is there a link on how to do it and locate the area which needs tightening
I'm going to cover it in a new video, but normally just one bolt needs threadlocking and tightening at the bottom of the inside of the stem. Really simple once you have the tools
Hi mate just Purchased the m4 pro have you or is there any way to up the performance in the settings good scooter but thought it would pull more up hill
Unfortunately we are stuck with the power unless you open up the controller and solder the shunt. Or completely replace with a better controller
What part of the UK are u im wanting two Apollo phantoms for me and my gf but not sure if it would get bad rep
I'm in Lincolnshire bud. Those new Phantoms look amazing, I love the display. Its up to you, I ride regardless of what anyone thinks. At the end of the day all of them are illegal to ride in public so what does it matter if its a powerful one
@@bill-e6114true man I live in a nicer area too so I doubt the federales will see us
Thanks I watched this to help the wobbly stem and helped a lot and did u manage to mod it and get more power because I wanna bit more power and have no idea how to do it
Your welcome, It will be modded in a week maybe. It should have double the torque and an extra 1-2mph. It will cost around £80 to do this though
@@bill-e6114 ok do you know anywhere I can get this done ?
@@ziggyeu7519 I may run you guys through it in a tutorial video depending on how easy the process is
@@bill-e6114 oh ok hopefully see that soon thanks
How did you change the stem bar from the bendable one to a solid one, did you buy a new stem
No original stem on the M4 pro, just buy handlebars that fit 31.8mm stems
@@bill-e6114 so I can buy another stem that will fit my stem hole, I tryed looking for a different stem but couldn't find 1 anywhere to buy, do you know where i can buy one
No matter what I type in my search for handlebar or handlebar stem or handlebar pole or handlebar riser, I cannot find your handlebar,s or the parts to make myself anywhere, I can't find the pole anywhere on any buying app , all I can find is the clamp to hold the handlebar and stem,, iv even been on there web site and they don't sell them for m4 pro,
Just type 31.8mm handlebars and any mountain bike ones will fit your m4 pro
@@bill-e6114 i know that, your not getting what I mean, the long down pole that the clamp and handlebar sit on, there's 3 peaces, 1 the handlebar. 2 the clamp. 3 the down pole. Which is only 25cm wide, I cannot find this part anywhere
Suspension it's loud,you need take it off springs and make soft washers on the bottom and top of them,then fix everything together, effect- silent suspension 😉
Thanks for that tip mate I may do that fix soon. I've been looking at some completely different suspension but may try that fix first 😀
Hi mate I've got the same problem with my Solar P1 scooter it's loud going over uneven terrain and sounds like it's falling apart 😂. But its not really. Could you be more in detail as to how to do it I'm really interested in trying and also is it necessary to take of the suspension completely.
@@laxlax9960 glad you ask 😁 because that wasn't springs fault,better I do short video and send u over here,maybe today ☺️
Can you tell me what to get to tighten up stem
Inside the upright at the very bottom is an 8mm bolt. Get to this with 2 extensions and locktite that bolt in place
@@bill-e6114 cheers thanks
I have my volume on mute. So you only used threadlock on that hex bolt and it fixed the wobble?
I done this few times already and the wobble will come back after a week of jumping off curbs and jumping the 15mph speed bumps going 25mph. I used threadlock and put bigger washers.
I was hoping there is a whole new system of front wheel and stem to put on that doesn't have the problem.
Or. I had an idea of using some solid metal plates on the outside left and right.
And seems like another in the comments have done this.
For me, its worked a treat. Some people have used shake proof washers and reported good results. Try some of the JB weld super threadlock as thats what I used the first time and it locked down tight
@@bill-e6114 I'll try that
@@bill-e6114 grease your steering bearing before putting it all back together! Haha. I put some marine grease into the steering bearing due to rust issues from riding in rain and snow. Now is just fixing that wobble. I ordered the jb weld lock tight and different locking washers.
Good shout! I'll probably do that the next time around if it loosens up. Hopefully yours won't loosen again🤞
Where abouts did u get the bars from as I have same scooter n I’m having the same problems with the wobble
Any 31.8mm bars should fit, these ones I just had laying around but they were 25.4mm so needed a spacer. It's real easy to fix the wobbly stem with the extensions, just use quality red threadlock on the bolt or it will work its way loose again
Do you tighten from bottom by forks or top of handle bars
Check my latest vid, I go through this
Yeah thanks ordered the stuff off amazon waiting for them to come do you know if there is anyway of making them faster
Hi buddy , what size diameter bars have you used to convert , as I think with this conversion you've done looks slick, as I may order a new mtb stem red , and new bars , my scooter doesn't arrive for 2 weeks
These are 25.4mm handlebars with a 31.8mm to 25.4mm spacer used on the stem. So much more control with these bars its definitely worth converting. Just keep gathering your mod parts til it comes, then you've got a beast😁
@@bill-e6114 i have a pair of red anodized mtb 31.8mm , will they fit straight on the stem?
@@kylecoops720 yeah, straight on mate
@@bill-e6114 hi sorry to bother but do you think you could link the handlebar? I’ve done all the adjustments on my M4 pro, I just need to switch to a new handlebar which I know nothing of. Your looks like it does the job, as it doesn’t wobble or turn on its own. I’d be very grateful if you could tell me where to order the handlebar from!
Appreciated,
A fellow rider.
Mate where did you get the black bolt caps from? Or what size do you get?
I 3d printed them, they even have the G on top. I'll print some more up soon and give them away 😀
@@bill-e6114 i would gladly buy them if you were to put them up for sale
@@dsldn7701 I'll probably be giving 5 sets away for free in the next vid. You've got dibs on the first set 😉
@@bill-e6114 where do you live billy?
@@jakubbednarski9539 in Lincolnshire bud
So what size hex key do i use on these 2 extensions to tighten the stem
Pretty sure its an 8mm
I think it's an 8mm hex also. I will be checking tomorrow haha I have to fix mine again
your the only one in the world that sits bro lol
I sit I feel like I’ve more stability
I've got a Solar P1 I bought it without the seat about 2 weeks ago. Let me tell you this, every single day I wish I had a seat and can't wait to purchase one very soon. It's just Soo much more relaxing to be able to sit and travel that's my personal opinion. Even if you have a seat doesn't mean you can't stand when u feel like it.
When I accelerate on p7 setting on the thing pulls like a train and spinning wheels and holding on for deal life. The issue is the acceleration and declaration rocks you back and forth and with a seat I feel that issue would be minimized and less hearthache lol
Edit deal life is dear life and declaration is decelerating
I have went down the exact same road as yourself. Bought the M4 pro and I do love it. Just wanted a bit more power.
Now received my G booster, however the locking pin that secures the front stem from folding was badly bent due to transit.
All built up and ready to go as soon as my new part comes from Kugoo.
Please note that the valve stem to inflate your tyres come out to meet the disc brakes, with very little room for manoeuvre. So buy yourself the 90 degree valve extensions or you'll be forever frustrated!
It doesn't take long before you want more does it 😁
I've seen that's quite a common one with the screw part on the locking pin. Mine has a slight bit of curvature to it but its okay. Might see if I can get a replacement too
Thanks for the tip! Yeah mines got the straight valves on it, so I suppose sliming it is going to be hard work
@@bill-e6114 Exactly what I was thinking. Going to probably wait till the puncture happens, then buy inner tubes with angled valves.
Were can i get the locking pin? As mine fell out as i was riding ive tried to look online but cant seem to locate one
@@elijahreid8283 Not sure mate, might be something that needs fabricating. I've seen people using clamps to keep theirs up when that happens. Ball ache to fold back up though
@@grahamsenior4443 Ordered them 90 degree valves now, they should have included them in the box IMHO
Could I swap the 500w motor for a 1000w?
You could do, it probably won't give you much more power unless you actually increase voltage and or current with a new controller or battery
Hey, Can you give me a link to the handle bars you used in this vid?
Sorry these are off one of my old bikes, but any 31.8mm handlebars will fit the scooter
@@bill-e6114 hey Bill, I can't find any 38.8 mm handle bar online (on Amazon at least) a 31.8 mm will not fit I guess ?
ooh another one soon.. look forward to that.
Took it out for a test tonight for a couple of miles. Its like a ballistic missile! Couldn't get the grin of my face!
Ho i would fix when its wobble stem there was some plastic an it vroke and now go riggt and left
i got the g2 pro 1000 watt 15ah one and yes i think the g2 pro is better and looks better faster aswell but yes i had a wobble when i was doing 30 mph and i hit a bump i got a little wobble so i upgraded the stem and put some 29 inch wide wake bar,s and that made all the difference i got the same front lights that you got on your g,booster, on my g2 pro. i do like the g,booster fast little scooter
Ordering kugoo g booster next week I was going to buy a g2 Pro but decided to save for a couple more weeks for the bigger scooter 👍
Definitely the right choice dude, its an absolute animal!!
@@bill-e6114 if you look closely into the back wheel it's says 1200 Watts 🤔👌👍
How much is a g booster billy? Is it a new scooter or a part to make the scooter faster? I have the same 1 as u and interested. Were u from mate? I am merseyside. Id love support to fit mine if it makes it faster
@@daymul872 Yes its a new scooter buddy, they are around 900 but they have ridiculous acceleration and seem to be so much more solid. I'm in Lincolnshire bud so a bit far away. You can definitely make the M4 have more torque with a new controller which I'll be fitting soon and will help you if you decide its something you would like to do 🙂
@@freddy512 Your correct apparently each motor peaks at 1200w on the G booster thats nearly 4 times the power of the M4
Never ever thought one day I will be watching these videos. I must say a big thank you to yourself mate. After watching one video from you I went and got the m4 pro and ngl im.scared as fuck when I get on the road but after putting the seat I feel like an actual motor bike and make its easy riding on roads . only thing im.getting confused about is.. are we allowed on these roads?
Thats good to hear buddy, kind of makes it worthwhile making these vids seeing comments like this. Yeah being stood up is so much scarier compared to the seat and I will keep on arguing that its safer and more stable. Technically not allowed but it's something a we are kind of getting away with for now until a clamp down
Using the seat takes weight off the front wheel and will cause to wobble around over bumps. It's sketchy if in the bike lane and cars are next to ya.
It's better to stand which will put more weight on that front wheel. Or just a wider front tire than the stock m4 pro.
my g2 pro is wobbly can someone help me
I had the m4 pro but sold it, waiting for my emove cruiser 👍👍👍
Thats things got some range!!
@@bill-e6114 yh I just got it today, will have to put it through its paces b4 I can comment on it though
If anyone else is looking for a way to loosen the steering wheel for this old machine.
After adjustment, pour elastic glue over the adjustment screws inside.
When's the next vid
Probably Sunday or Monday but will try to get one out sooner. It was supposed to be a first ride on the G Booster, but it sort of broke during filming 😭
My m4 jyst stopped I opend it up the wiring was atrocious the wires was jyst twisted together then covered in insulation tape and that was lose anyways the brain on them is just put in them so knock and rattle like mad it broke of a solder in the brain. So if yours break down its mo doubt something broke in the brain.quiet easy if you can solder
Yeah this is why I put thermal conductive tape on the controller. Keeps it secure and much cooler 😎 wiring is shocking on these 😱
Hi can u post a quick video on how to fix the wobbly stem please, there are no videos on youtube.
Actually just finishing one off. Next couple of days it will be uploaded
I prefer sitting as well I’ve got three seated scooters now
My legs ache standing up for half hour on the scooter... call me a pussy if you like
@@bill-e6114 hi mate after watching your video I decided to buy 1 order it yesterday hopefully I get it soon
hi mate I don't have Instagram but I'm getting my m4 pro in few days and would really appreciate them stickers if you still have then please
I have a serius problem with the "stick", from the first ride it take slack and moves almost 2 cm in high zone. Driveable but not safe XD And one part of the dumpers was unscrewed and I can't put it again. For last, flat tyre 2 days ago :( The valve is a fucking shit!! Is imposible to use any air bomb!!!
Good Times
always obey the law .so if a policeman does ask you to stop make sure you ride away as fast as you can if you want to KEEP your scooter