Nope. I tried this before, it doesn't work, because "Hold Propeller Reverse Trust" affects both levers. So when you feather one engine you loose the ability to control the other - it goes to feather as well. There is no way to do an engine out procedure like this, which is the main reason you want feather bindings in the first place. As far as I can tell it's completely impossible to do any other way than with a mouse in the virtual cockpit and it's been like this for two years now.
how hard would it be to just fix the feather controls that are already in the configuration. You shouldnt need to increase or decrease pitch in order to feather @@martinandersson6695
Thank you. I have been trying to get this to work for a long time with no success. I am pleased to say that I now can apply reverse thrust. Thanks, mate. I have subscribed.
YOU ARE A LEGEND!!! THANK YOU!! Edit: note that because of how the prop reverse hold things works you still can not individually feather props when the other prop lever is full forward... lmk if anyone has a fix
Obrigado! (your accent sounds portuguese, like me). (edit: unfortunately, the feathering does not work if we want to feather just one engine but good try).
Hi I did exactly as you said, but it doesn't work, well it works as you demo it, by having both prop on coarse pitch as if you are about to shut down the engines and feather the props, but did you test it when you need to actually feather a prop in flight after an engine failure and the other prop is set at a high RPM, let's say 1600 RPM. When you want to feather a prop with the other prop on fine pitch, BOTH props will feather, so that doesn't work for feathering only ONE engine after an engine failure. Thanks for your help. Note: The fix I think would be to be able to have the HOLD PROP ON REVERSE option should be separated for BOTH engines, it should be a HOLD PROP ON REVERSE ENGINE 1 and engine 2 separately, but MSFS doesn't offer this option...so what to do?? Thanks
Eu pensei nisso mas ficava difícil apanhar o ecrã e as manetes ao mesmo tempo! O ideal era fazer gravação do video e depois colar o vídeo das manetes por cima, tipo montagem... Mas por enquanto parece trabalho a mais
I'VE tried everything, and not work on my, i dont know why... i did exact same time, same profile you teach, ALWAYS, when i save it, and go back to test, when i test and not work it, i go to optionms again, and check what i put "on release" and it show as "On pressed" i dont know why my MSFS do this, looks like when i save it, he just ignore what i did... thats sucks
try to bring both levers to the minimum, before you cut one of them, only then put one into feather, and then you can put the condition you want on the working engine. i know it is not perfect but is the best i know. and i have a follow up video on the channel where i show it working ua-cam.com/video/atbsxsEqPr8/v-deo.html
@@boda09games there are other videos doing the same. But essentially this does not work when the Airplane is in cruise configuration. For after flight and shutdown this works but does not when you are in flight in cruise config. Try it you will see. The point is. Its not correctly simulated yet.
Nope. I tried this before, it doesn't work, because "Hold Propeller Reverse Trust" affects both levers. So when you feather one engine you loose the ability to control the other - it goes to feather as well. There is no way to do an engine out procedure like this, which is the main reason you want feather bindings in the first place. As far as I can tell it's completely impossible to do any other way than with a mouse in the virtual cockpit and it's been like this for two years now.
I'm having the same issue.
@@salcrocker894 Yes, same for me! How hard can it be for Asobo to add "Hold propeller 1 (2) reverse thrust?
how hard would it be to just fix the feather controls that are already in the configuration. You shouldnt need to increase or decrease pitch in order to feather @@martinandersson6695
Same issue anyone have a fix for this?
Awesome my man. It worked. I looked for this solution thoroughly and I was lucky I found your vid. Thank you and have a nice flight
you might be the literal only place to find this info. Good job!
Thanks so much this worked perfectly for single engine and twin engined. I have no idea how you managed to work this out!
Thank you. I have been trying to get this to work for a long time with no success. I am pleased to say that I now can apply reverse thrust. Thanks, mate. I have subscribed.
YOU ARE A LEGEND!!! THANK YOU!! Edit: note that because of how the prop reverse hold things works you still can not individually feather props when the other prop lever is full forward... lmk if anyone has a fix
Thank you - I never would have figured this out!
very nice, thanks! asobo messed up a bit so when you select on release you have to select on release again because it doesn't save the first time
Thanks for the video. It was doing my head in, now works well. Enjoy your flying.
I've only been trying to figure this out since the sim came out! Thank you!
Obrigado! (your accent sounds portuguese, like me). (edit: unfortunately, the feathering does not work if we want to feather just one engine but good try).
thnakyou so much
Thanks brother. Saved me lots of headaches with this one
Did it work for you? I doubt it.
Yeah this is prolly the best workaround, thanks!
Thank you man, ive been looking for this.
Genius, I knew there had to be a way, thanks so much!
Another person says thanks.
Hi
I did exactly as you said, but it doesn't work, well it works as you demo it, by having both prop on coarse pitch as if you are about to shut down the engines and feather the props, but did you test it when you need to actually feather a prop in flight after an engine failure and the other prop is set at a high RPM, let's say 1600 RPM. When you want to feather a prop with the other prop on fine pitch, BOTH props will feather, so that doesn't work for feathering only ONE engine after an engine failure.
Thanks for your help.
Note: The fix I think would be to be able to have the HOLD PROP ON REVERSE option should be separated for BOTH engines, it should be a HOLD PROP ON REVERSE ENGINE 1 and engine 2 separately, but MSFS doesn't offer this option...so what to do??
Thanks
yes you are rigth
It Works with the Kodiak 100 (SWS) and Turtlebeach Velocity One Flight Throttle Quadrant (Single Engine)
Thank You.
Thanks a ton for making the video !! It's super helpful.
What a absolute LEGEND Mr Boda09 Games is!!! Thanks brother! . SUBBED!
Bom vídeo! Para a próxima graça com o telemóvel na horizontal 😊 continua
Eu pensei nisso mas ficava difícil apanhar o ecrã e as manetes ao mesmo tempo! O ideal era fazer gravação do video e depois colar o vídeo das manetes por cima, tipo montagem... Mas por enquanto parece trabalho a mais
Thank you!
thanks! This is exactly what I was looking for.
Did you do a video on how to configure reverse thrust?
I'VE tried everything, and not work on my, i dont know why... i did exact same time, same profile you teach, ALWAYS, when i save it, and go back to test, when i test and not work it, i go to optionms again, and check what i put "on release" and it show as "On pressed" i dont know why my MSFS do this, looks like when i save it, he just ignore what i did... thats sucks
Thanks man. That was helpful!
Great solution, thank you!
Thank you so much for the tip. GREAT !!!
Did it work for you? I doubt it.
hi, many thanks, but, how i config the trim ruder and trim aleron axis?
i do not use the bravo for that, i use the yoke
hard to see .. can you make it zoom in?
Suuuuuuuuuuuuuuuuuper thaaanks so much !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Nica, so my second set doesn't work ive tryed many times and no way
Spot on! Thank you!
THIS HELPED BUT FOR SOME REASON THE LEVERS WORK TOGETHER. SO WHEN i FEATHER PROP 1 PROP 2 DOES AS WELL? But I may work it out form here thank you!
try to bring both levers to the minimum, before you cut one of them, only then put one into feather, and then you can put the condition you want on the working engine. i know it is not perfect but is the best i know. and i have a follow up video on the channel where i show it working ua-cam.com/video/atbsxsEqPr8/v-deo.html
Thank you 👏👏
Waste of time!! Your only showing how it works when props are at min. Not when its in cruise config. Just click bait!!
Just trying to help... Sorry if it did not help you! For me is working just fine! I will do other vídeo to show it then...
@@boda09games there are other videos doing the same. But essentially this does not work when the Airplane is in cruise configuration. For after flight and shutdown this works but does not when you are in flight in cruise config. Try it you will see. The point is. Its not correctly simulated yet.
@@Swartbart it is the best option for now! And it works perfect on single engine... in multiengine just use the mouse to ajust the propeller pitch...
@@boda09games and thats the problem! Multi engine! Only single engine that festher are turbo props!
@@boda09games so you should rename your video accordingly since it only works for turbo prop single engine!
I 🎉🎉🎉🎉 u
Toll not German
Thank you!
Although, it doesn’t allow feathering only one of the props, it does both